基于显著性图像与纹理特征的遥感影像云检测

遥感影像云检测是遥感影像处理中非常关键的环节,准确识别影像含云区域能够提升影像的利用价值。根据遥感影像的成像特点,将阈值法和纹理特征结合实现云和下垫面的分割。首先将影像从RGB(red-green-blue)空间转化为HSI(hue-saturation-intensity)空间,进而构建影像的显著性图像,利用Otsu法对显著性图像进行粗分割,再基于灰度共生矩阵分析云和下垫面的纹理特征,进一步提取出准确的云区。实验表明,该算法复杂度较低,提取效果良好。     

地震层析成像中LSQR算法的快速求解

针对传统LSQR反演算法计算时间长、占用内存大的不足,这里提出了一种LSQR的快速算法,通过线性三元组存储稀疏矩阵,实现相应的矩阵运算,使LSQR算法的运算速度及内存占用都有较大地改善。     

基于两种颗粒体模型的巷道围岩应力应变分析

本文将岩石视为颗粒体材料,采用两种模型对巷道围岩的应力、应变及破坏区的分布规律进行了数值模拟。第一种模型是连续介质模型,其中考虑了颗粒、界面及基体。第二种模型是将第一种模型中的基体去掉。研究结果表明:当基体强度参数降低较少时,巷道围岩中的环向和径向应力在传统结果附近波动;当基体强度参数降低较多时,两种应力的波动幅度提高,而且,基体位置的应力向其周围的颗粒或界面转移。第二种模型结果的波动幅度更大。随着基体强度参数的降低,巷道围岩中的应变集中区向深部转移,形成相互交织的滑移线网,滑移线网的位置主要位于基体和界面中,这与第二种模型的结果有明显的差异(多个环向的应变集中区)。     

后赤潮过程中现场水样的三维荧光光谱特征分析

对发生在青岛近岸水域的后赤潮过程中赤潮藻密度、藻种进行鉴别的同时,对现场水样的三维荧光光谱进行了测量,获得了一套三维特征荧光数据。分析结果表明,1）当海水中生物密度达到或接近赤潮密度时,Ex最高峰值波长位于245nm,Em最高峰值波长在445nm,激发转折波长在260nm,荧光转折波长在245nm;2）在非赤潮区,Ex...     

浮基多体系统在波浪中展开的数值模拟

浮基多体系统在波浪中展开过程的顺序与快慢对系统的运动响应和连接处的力矩有较大影响。介绍了建立在齐次矩阵方法基础上的浮基多体系统时域运动求解,并对一具体浮基系统进行了建模和数值模拟,分析了上部机构以一定规律快速展开和慢速展开时系统的运动响应。结果表明,把齐次矩阵方法引入浮基多体系统的求解领域,其符号推导方便,运动学和动力学方程表达式变得相当简洁,而且编制程序也相对简便快捷。在相同波浪周期的情况下,多体系统的最大横摇角响应与波高正相关;在相同波高情况下,长周期的最大横摇响应要比短周期小;相对于波周期,波高对系统横摇响应的影响要大的多。     

Generating non-stationary random fields of auto-correlated,normally distributed CPT profile by matrix decomposition method

This paper emphasises the true realisation of Cone Penetration Test (CPT) profiles considering non-stationary nature of the data. Formulation of stationary random field theory has been modified and adapted to non-stationary state in order to take into account the mean and variance variability for soil properties. Multi-variance correlation matrix along with the Cholesky decomposition technique was employed to produce realisations of non-homogenous and non-stationary random fields of CPT profiles. A piecewise and segmental data realisation according to the lithology and site class specifications acquired directly from CPT data is adopted in this study so as to render an accurate data simulation. For validation of proposed method 8 CPT test profiles collected from Urmia Lake site have been introduced and simulated by the stationary and non-stationary algorithms. The mean correlation coefficient between the actual CPT data profiles and related realisations along with some other important statistical parameters and their coefficients of variation strongly demonstrate that non-stationary random field generation technique gives quite better accuracy, by comparison to the conventional stationary random field generation scheme.     

A simplified nonlinear analysis method for piled raft foundation in layered soils under vertical loading

This paper presents a simplified nonlinear solution for piled raft foundations in layered soils under vertical loading. Based on the elastic–plastic analysis of a single pile in a layered soil, the shielding effect between a receiver pile and the soil is taken into account to modify the conventional interaction factor between two piles. An approximate approach with the concept of the interaction factor is employed to study the nonlinear behavior of pile groups with a rigid cap. Considering the variation of soil properties, the solution to multilayered elastic materials is used to calculate the settlement of the soil. The interactions between pile–soil–raft are taken into account to determine the stiffness matrix of the piled raft. By solving the stiffness matrix equations, the settlement and the load shared by the piles and raft could be obtained. Compared with results of the available published literatures, the proposed solution provides reasonable results.     

An algorithm for fast 3D inversion of surface electrical resistivity tomography data: application on imaging buried antiquities

In this work a new algorithm for the fast and efficient 3D inversion of conventional 2D surface electrical resistivity tomography lines is presented. The proposed approach lies on the assumption that for every surface measurement there is a large number of 3D parameters with very small absolute Jacobian matrix values, which can be excluded in advance from the Jacobian matrix calculation, as they do not contribute significant information in the inversion procedure. A sensitivity analysis for both homogeneous and inhomogeneous earth models showed that each measurement has a specific region of influence, which can be limited to parameters in a critical rectangular prism volume. Application of the proposed algorithm accelerated almost three times the Jacobian (sensitivity) matrix calculation for the data sets tested in this work. Moreover, application of the least squares regression iterative inversion technique, resulted in a new 3D resistivity inversion algorithm more than 2.7 times faster and with computer memory requirements less than half compared to the original algorithm. The efficiency and accuracy of the algorithm was verified using synthetic models representing typical archaeological structures, as well as field data collected from two archaeological sites in Greece, employing different electrode configurations. The applicability of the presented approach is demonstrated for archaeological investigations and the basic idea of the proposed algorithm can be easily extended for the inversion of other geophysical data.     

竖向质量分布对框架结构动力特性影响的研究

在框架结构动力分析中,往往是把填充墙质量集中在楼层处进行求解.文中考虑填充墙实际分布对结构自振特性的影响,通过传递矩阵法求解结构自振频率和振型,并进一步分析了高阶频率的分布规律.结果表明,与采用集中质量模型的振型叠加法相比,填充墙的竖向质量分布会对框架结构高阶频率产生很大影响;框架结构的高阶模态具有局部性和密集分组的特...     

弹性各向异性介质岩石体波相速度计算

综述弹性波相速度计算的若干严格数值方法和近似解析方法,对数值算例及对不同方法作了比较.结果显示,不同数值方法得到结果一致,其适用于计算任意复杂各向异性介质岩石的相速度,但不便从物理意义的角度去分析物理参数对速度的影响;而近似解析解虽然精确程度各有不同,但是便于从物理意义的角度去进行速度分析,并在此基础上解析求取群速度这...