Optical properties of amorphous carbon thin films prepared by plasma deposition in a graphite hollow cathode

Carbon films have been produced using a graphite hollow cathode and an r.f. plasma of hydrogen or hydrogen and argon. No hydrocarbon gas was used. The films were subjected to heat treatments up to 700 °C in air. The optical properties of the films were studied using Fourier transform IR, UV-visible, Raman, ellipsometry and photoluminescence techniques before and after the annealing. Films prepared without argon have a narrower band gap and a different photoluminescence response from films prepared with argon. The index of refraction was seen to have values between 1.7 and 2.2 depending on the preparation conditions. The optical band gap of the films was generally greater than 2 eV and the annealing process both increased the gap and reduced the density of states responsible for the large photoluminescence signal.     

Biofiltration of toluene in the absence and the presence of ethyl acetate under continuous and intermittent loading

BACKGROUND: Two peat biofilters were used for the removal of toluene from air for one year. One biofilter was fed with pure toluene and the other received 1:1 (by weight) ethyl acetate:toluene mixture. RESULTS: The biofilters were operated under continuous loading: the toluene inlet load (IL) at which 80% removal occurred was 116 g m^?3 h^?1 at 57 s gas residence time. Maximum elimination capacity of 360 g m^?3 h^?1 was obtained at an IL of 745 g m^?3 h^?1. The elimination of toluene was inhibited by the presence of ethyl acetate. Intermittent loading, with pollutants supplied for 16 h/day, 5 days/week, did not significantly affect the removal efficiency (RE). Biomass was fully activated in 2 h after night closures, but 6 h were required to recover RE after weekend closures. Live cell density remained relatively constant over the operational period, while the dead cell fraction increased. Finally, a 15 day starvation period was applied and operation then re‐started. Performance was restored with similar re‐acclimatization period to that after weekend closures, and a reduction in dead cell fraction was observed. CONCLUSION: This study demonstrates the capacity of the system to handle intermittent loading conditions that are common in industrial practices, including long‐term starvation. Copyright © 2008 Society of Chemical Industry     

Substance use escalation and substance use restraint among adolescent children of alcoholics.

Assessed the escalations in substance use over 3 yrs among 246 adolescent children of alcoholics (COAs) and 208 controls (aged 10.5–15.5 yrs). Older COAs showed the steepest escalations in drug use. Younger COAs whose fathers had continuing alcohol-related consequences showed the greatest escalations in alcohol use. Ss' beliefs about drinking restraint were related to their alcohol and drug use. Those whose alcoholic fathers had no continuing alcohol-related consequences showed the strongest relations between substance use and self-control reasons for limiting drinking, perceived risk for future drug problems, and seeing the negative effects of alcohol on someone else. These adolescents may be deterred from substance use escalations because of particular parental characteristics (e.g., mild forms of paternal alcoholism) or because of their beliefs about substance use. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Measuring the errors of form of industrial surfaces: prediction and optimization

To acquire maximum information on the geometrical errors of industrially made surfaces at a minimum cost, a method for estimating conditional probabilities of a random signal (Bayesian prediction) is applied to three-dimensional metrology. First, a surface is interpolated between data acquired on a coordinate measuring machine (CMM). Then, for a given probability, limit surfaces are computed that bind a region of space containing the known data and the most probable interpolation of the missing data of the surface. These bounds can be treated as the surface; their points can be considered as if they were actual CMM data when fitting a tolerance zone or a datum feature to the data. For Bayesian prediction, the basic hypotheses on the signal are stationarity, ergodicity, and gaussian density. Deviations from these hypotheses and their consequences on the prediction are taken into account and corrections are proposed.     

Renal osteodystrophy in diabetic patients

To assess the effects of diabetes mellitus on renal osteodystrophy, we examined the database of 256 patients (45% on hemodialysis and 55% on peritoneal dialysis) who were prospectively studied in three Toronto dialysis centers between October of 1987 and 1989. All patients had serial documentation of their clinical, laboratory and risk parameters of bone disease, and completed a series of investigations that included the deferoxamine test, measurement of intact 1-84 PTH levels, and an iliac crest bone biopsy. Twenty-five percent of these patients were diabetic. When compared to non-diabetic patients, they were on dialysis for a shorter duration (2.4 +/- 0.3 vs. 4.7 +/- 0.3 years; P < 0.0002), used calcium carbonate as the only phosphate binder more frequently (40 vs. 25%; P < 0.007), and had lower parathyroid hormone levels (12 +/- 1.4 vs. 24 +/- 2.3 pmol/liter; P < 0.002). High-turnover bone disorders (that is, osteitis fibrosa and mixed disorder) were distinctly uncommon (8 vs. 33%; P < 0.01 by Fisher's exact test), while the mild (19 vs. 9%; P = NS) and the aplastic disorders (with mean stainable bone surface aluminum of 6.5 +/- 0.7%) (46 vs. 31%; P = NS) tended to be more common in diabetic patients. The prevalence of aluminum bone disease was the same in both groups (27%). Diabetic patients ingested a smaller cumulative dose of aluminum gels (3.7 +/- 0.6 vs. 9.3 +/- 1.1 kg; P < 0.005), yet had a higher rate of aluminium accumulation on bone surfaces than non-diabetic patients (1.5 +/- 0.19 vs. 0.96 +/- 0.10% per month on dialysis; P < 0.015).(ABSTRACT TRUNCATED AT 250 WORDS)     

Intelligent scheduling with tabu search: An application to jobs with linear delay penalties and sequence-dependent setup costs and times

In this article we study thetabu search (TS) method in an application for solving an important class of scheduling problems. Tabu search is characterized by integrating artificial intelligence and optimization principles, with particular emphasis on exploiting flexible memory structures, to yield a highly effective solution procedure. We first discuss the problem of minimizing the sum of the setup costs and linear delay penalties when N jobs, arriving at time zero, are to be scheduled for sequential processing on a continuously available machine. A prototype TS method is developed for this problem using the common approach of exchanging the position of two jobs to transform one schedule into another. A more powerful method is then developed that employs insert moves in combination with swap moves to search the solution space. This method and the best parameters found for it during the preliminary experimentation with the prototype procedure are used to obtain solutions to a more complex problem that considers setup times in addition to setup costs. In this case, our procedure succeeded in finding optimal solutions to all problems for which these solutions are known and a better solution to a larger problem for which optimizing procedures exceeded a specified time limit (branch and bound) or reached a memory overflow (branch and bound/dynamic programming) before normal termination. These experiments confirm not only the effectiveness but also the robustness of the TS method, in terms of the solution quality obtained with a common set of parameter choices for two related but different problems.     

Image segmentation towards new image representation methods

Very low bit-rate video coding has recently become one of the most important areas of image communication and a large variety of applications have already been identified. Since conventional approaches are reaching a saturation point, in terms of coding efficiency, a new generation of video coding techniques, aiming at a deeper “understanding” of the image, is being studied. In this context, image analysis, particularly the identification of objects or regions in images (segmentation), is a very important step. This paper describes a segmentation algorithm based on split and merge. Images are first simplified using mathematical morphology operators, which eliminate perceptually less relevant details. The simplified image is then split according to a quad tree structure and the resulting regions are finally merged in three steps: merge, elimination of small regions and control of the number of regions.     

Facilitating the learning process in parallel computing by using instant messaging

Parallel Programming skills may require a long time to acquire. “Think in parallel” is a skill that requires time, effort, and experience. In this work, we propose to facilitate the students’ learning process in parallel programming by using instant messaging. Our aim was to find out whether students’ interaction through instant messaging tools is beneficial for the learning process. In order to do so, we asked several students of an HPC course of the Master’s degree in Computer Science of the University of León to develop a specific parallel application, each of them using a different application program interface: OpenMP, MPI, CUDA, or OpenCL. Even though the used APIs are different, there are common points in the design process. We encouraged students to interact with each other by using Gitter, an instant messaging tool for GitHub users. Our analysis of the communications and results demonstrate that the direct interaction of students through the Gitter tool has a positive impact on the learning process.

     

A panoramic view and swot analysis of artificial intelligence for achieving the sustainable development goals by 2030: progress and prospects

Applied Intelligence - The17 Sustainable Development Goals (SDGs) established by the United Nations Agenda 2030 constitute a global blueprint agenda and instrument for peace and prosperity...     

Hyperspectral imaging-based unsupervised adulterated red chili content transformation for classification: Identification of red chili adulterants

Neural Computing and Applications - Preserving red-chili quality is of utmost importance in which the authorities demand quality techniques to detect, classify, and prevent it from impurities. For...