小型低温真空光学实验装置设计

为适应未来遥感光学系统研究的需要,研制了一套低温真空实验装置.该实验装置包括低温真空腔体、真空抽气系统、ZYGO干涉仪和防震平台以及监控测温系统.其中的低温真空腔体是针对小型光学元件实验设计的,主要用于测量光学元件的温度场和低温变形,并且把电机产生的局部热量尽可能导出系统.文中还对真空低温腔的关键部件光学窗口和梯形支撑的设计进行了详细分析.     

Finite element piezothermoelasticity analysis and the active control of FGM plates with integrated piezoelectric sensors and actuators

 An efficient finite element model is presented for the static and dynamic piezothermoelastic analysis and control of FGM plates under temperature gradient environments using integrated piezoelectric sensor/actuator layers. The properties of an FGM plate are functionally graded in the thickness direction according to a volume fraction power law distribution. A constant displacement-cum-velocity feedback control algorithm that couples the direct and inverse piezoelectric effects is applied to provide active feedback control of the integrated FGM plate in a closed loop system. Numerical results for the static and dynamic control are presented for the FGM plate, which consists of zirconia and aluminum. The effects of the constituent volume fractions and the influence of feedback control gain on the static and dynamic responses of the FGM plates are examined. Received: 13 March 2002 / Accepted: 5 March 2003 The work described in this paper was supported by a grant awarded by the Research Grants Council of the Hong Kong Special Administrative Region, China (Project No. CityU 1024/01E).     

The influence of plastic properties on chip formation

A two-dimensional finite-element model of the chip formation process is used to study the influence of the material law determining plastic flow on chip formation of titanium alloys at high cutting speeds. For simplicity, friction and thermo-mechanical properties of the tool are neglected in the simulations. Titanium chips are strongly segmented and therefore especially suitable to study the role of segmentation for the cutting force and other cutting parameters. Of special interest is the influence of the thermal softening parameter in the material law. Increasing thermal softening leads to a drastic decrease in the cutting force and a corresponding increase in chip segmentation. A variation of the hardening exponent is also performed. It is shown that the simulation results can be understood by using adiabatic flow stress curves. The variation of the hardening exponent leads to strongly differing chip shapes, although the cutting force stays nearly constant. This shows that mean cutting forces should not be used as simulation verification parameters.     

Numerical Study of Finite Element Method Based Solutions for Propagation of Wetting Fronts in Unsaturated Soil

The accurate prediction of the propagation of a wetting front in an unsaturated soil subjected to surficial infiltration is of practical importance to many geotechnical and geoenvironmental problems. The finite element method is the most common solution technique as the hydraulic soil properties are highly nonlinear. Two important issues are often found to create difficulties in such analyses. First, numerical oscillations are usually observed in the calculated pore pressures at the wetting front. Second, when a reasonable mesh size and time step are used, the elevation of the wetting front may be seriously overpredicted. This paper is focused on the second issue. The under-relaxation (UR) technique used in the iterative process within each time step is found to have a serious impact on rate of convergence with refinement in mesh size and time step. Two different techniques are typically used; the first evaluates the hydraulic conductivity using an average of heads calculated from the preceding time node and the most recent iteration of the current time node (UR1), and the second evaluates the hydraulic conductivity using the average of heads calculated from the two most recent iterations of the current time nodes (UR2). The study shows that UR1, which is adopted in programs such as SEEP/W, ensures that the solution converges rapidly to a stable solution within a time step, but may converge to the wrong wetting front at a given elapsed time unless a sufficiently refined mesh is used. UR2 converges much more slowly within a time step, but the error in the wetting front is smaller than that generated by UR1.     

Numerical Simulation of Waveguides of Arbitrary Cross-Section

Finite difference equations are derived for the simulation of dielectric waveguides using an H_z-E_z formulation defined on a nonuniform triangular grid. The resulting equations may be solved as a banded eigenproblem for waveguide structures of arbitrary shape composed of regions of piecewise constant isotropic dielectric, and all transverse fields then computed from the solutions. Benchmark comparisons are presented for problems with analytic solutions, as well as a sample calculation of the propagation loss of a hollow Bragg fiber.     

Finite element analysis of femoral components paper III – hip joints

Finite element analysis of the hip implant is conducted in this paper for representative femoral cross-section geometries and development of stress in the presence of bone cement is elucidated. Differences in cement stresses generated by varying implant cross-sections were compared with conventional features derived from representative implants. The analysis was performed under idealized implant assemblies by constraining the implant movement in the assembly. The cross-sections and implant geometries used are generic and intended to be representative of available geometries. This paper is a part of student research projects, prepared from a series of activities in biomedical implant research currently underway at Ohio Northern and Arkansas Tech Universities.     

A three-dimensional FE analysis of large deformations for impact loadings using tetrahedral elements

 A three-dimensional dynamic program for the anaysis of large deformations in contact-penetration problems is developed using the finite element Lagrangian method with explicit time integration. By incorporating a tetrahedral element, which allows a single-point integration without a special hourglass control scheme, this program can be more effective to the present problem. The position code algorithm is used to search contact surface. Eroding surfaces are also considered. The defense node algorithm was slightly modified for the calculation of contact forces. A study of obliquity effects on metallic plate perforation and ricochet processes in thin plates impacted by a sphere was conducted. It is well simulated that on separation of two parts of the sphere, the portion still within the crater tends to perforate, while the portion in contact with the plate surface ricochets. This deformation pattern is observed in experiments, especially at high obliquities. A long rod that impacts an oblique steel plate at high impact velocity was also simulated in order to study the dynamics of the rod caused by the three dimensional asymmetric contact. The agreement between simulated and experimental results is quite good. Fracture phenomena occuring at high obliquity deserves further investigations. Received: 20 February 2002 / Accepted: 20 September 2002     

Nonreactive atom/molecule-surface scattering within the finite basis wave packet method

A quantum wave packet code for studying nonreactive scattering of closed-shell atoms or diatomic molecules from a rigid surface is described. The time evolution relies on the Chebychev propagator. Up to 5 collider degrees of freedom, 3 in translation and 2 in rotation, are treated in a pseudospectral way with the momentum or finite basis representation as the primary space. Potential matrix elements are efficiently evaluated by means of sequential 1D transformations between momentum and coordinate spaces. Fast Fourier transforms are performed for the translational and azimuthal coordinates whereas a Gauss-Legendre transform is used for the polar coordinate. This pseudospectral strategy minimizes memory requirements because no off-diagonal Hamiltonian matrix elements need to be stored. In addition, a wide variety of physical systems can be studied since no particular functional form is imposed for the interaction potential.     

射孔孔眼中散射超声脉冲波的FEM模拟

采用有限元素法 ,分别数值计算了平底孔道、台阶式孔道和尖劈状孔道等 3种孔眼模型中不同中心频率 (10 0 k Hz、5 0 0 k Hz、1MHz)的散射超声脉冲波。计算结果表明 ,无论选用哪一种孔底模型 ,均可以得到较为明显的对应于孔底的声波信号。但是 ,孔道越不规则 ,使用的超声信号的主频越高 ,则孔底信号越差。为了兼顾孔底信号质量和信号采集、传输的代价 ,在未来的检测仪器中应采用尽可能低的测量频率 (低于 5 0 0 k Hz)