Thermal AFM: a thermopile case study

In this work, an atomic force microscope (AFM) with an integrated thermal sensor has been used to obtain the local spatial distribution of temperatures in a micromachined thermopile with submicron resolution. In this communication, we will show how the dimensional, structural and functional characteristics of a thermopile suits well with the requirements for AFM thermal imaging, and how a deeper insight of the thermopile operation can be gained with the aid of these advanced scanning probe-based tools.     

Effect of rheology and processing parameters on the EPD coatings of basic sol-gel particulate sol

Homogeneous thick silica coatings were prepared onto metals substrates by Electrophoretic Deposition (EPD) using particulate sol-gel sols. The synthesis of the sols was performed by mixing tetraethoxysilane and methyltriethoxysilane under basic catalysis. The synthesis, storage and processing conditions were optimised, correlating the rheological properties of the sols with EPD performance and reliability. Homogeneous and crack-free coatings are obtained when both, the synthesis and the deposition, are performed under tight conditions avoiding the contact with room humidity. The maximum crack-free thickness of the sintered coatings was 12 m, three times more than those obtained by dipping.     

Occurrence of salmonellae in retail chicken carcasses and their products in Spain

This study examined the incidence of Salmonella in Spanish poultry products. Samples included chicken carcasses, chicken parts (wings, legs and giblets-livers and hearts) and processed chicken products (red sausages, white sausages and hamburgers). The average detection rate was 49%, with the highest (55%) in chicken carcasses (skin) and the lowest (20%) in hamburgers. The chicken carcasses purchased in supermarkets were more contaminated (75%) than those from poulterers shops (25%). Salmonella Enteritidis, S. Poona, S. Paratyphi B and S. Worthington were isolated in 34.3%, 11.4%, 2.8% and 1.4% of the samples, respectively. One (1.4%) red sausage sample harboured two serotypes (S. Enteritidis and S. Worthington). This fact emphasizes the usefulness of subtyping several Salmonella isolates from the same sample in epidemiological studies.     

A contribution to understanding secondary reactions in linear alkylbenzene sulfonation

Modern industrial sulfonation of linear alkylbenzene (LAB) in falling film reactors produces p-alkylbenzene sulfonic acid (HLAS), which is usually neutralized with caustic soda (NaOH) and used in detergent formulations. During the sulfonation process, other products such as anhydrides and sulfones are also formed. Four reactions are proposed to occur during aging and hydrolysis. As a consequences, approximately 25% of sulfones and 75% of unreacted LAB are removed during aging and are transformed into additional active matter. Anhydrides are completely eliminated during hydrolysis. On the other hand, sulfones formed during the process are difficult to remove once formed. The goal of this work was to optimize the various operating conditions of the sulfonation process and to understand the various secondary reactions that occur therein so as to obtain a maximal active ingredient concentration in the final sulfonated product and a minimum of unsulfonated matter. Formation of sulfones can be minimized by using an SO₃/LAB molar ratio slightly lower than the theoretical optimum.     

Phytoremediation potential of willow trees for aquifers contaminated with ethanol-blended gasoline

Ethanol-blended gasoline has been used in Brazil for 20 years and, probably, is going to be more widely used in North America due to the MtBE environmental effects on groundwater. The potential impacts caused by the presence of ethanol in UST spills are related to the co-solvency effect and the preferential degradation of ethanol over the BTEX compounds. These interactions may increase the length of dissolved hydrocarbon plumes and the costs associated with site remediation. This study investigates the advantages of phytoremediation to overcome the problems associated with the presence of ethanol in groundwater contaminanted with gasoline-ethanol mixtures. Experiments were performed under lab conditions with cuttings of Willow tree (Salix babylonica) cultivated hydroponically. Results showed that the cuttings were able to reduce ethanol and benzene concentrations by more than 99% in less than a week. The uptake of both contaminants was confirmed by blank controls and was significantly related to cuttings transpiration capacity. Sorption onto roots biomass also markedly affected the behavior of contaminants in solution. Experiments to evaluate plants' toxicity to ethanol indicated that plants were only affected when aqueous ethanol concentration reached 2000mgl(-1). Results suggest that phytoremediation can be a good complement to intrinsic remediation in shallow aquifer sites contaminated with ethanol-blended gasoline spills.     

Structural Changes in the BODIPY Dye PM567 Enhancing the Laser Action in Liquid and Solid Media

In the search for more efficient and photostable solid‐state dye lasers, newly synthesized analogs of the borondipyrromethene (BODIPY) dye PM567, bearing the polymerizable methacryloyloxypropyl group at position 2 (PMoMA) or at positions 2 and 6 (PDiMA), have been studied in the form of solid copolymers with methyl methacrylate (MMA). The parent dye PM567, as well as the model analogs bearing the acetoxypropyl group in the same positions, PMoAc and PDiAc, respectively, have been also studied both in liquid solvents and in solid poly(MMA) (PMMA) solution. Although in liquid solution PMoAc and PDiAc have the same photophysical properties as PM567, PDiAc exhibited a photostability up to 10 times higher than that of PM567 in ethanol under 310 nm‐irradiation. The possible stabilization factors of PDiAc have been analyzed and discussed on the basis of the redox potentials, the ability for singlet molecular oxygen [O₂(¹Δ_g)] generation, the reactivity with O₂(¹Δ_g), and quantum mechanical calculations. Both PMoAc and PDiAc, pumped transversally at 532 nm, lased in liquid solution with a high (up to 58 %), near solvent‐independent efficiency. This enhanced photostabilization has been also observed in solid polymeric and copolymeric media. While the solid solution of the model dye PDiAc in PMMA showed a lasing efficiency of 33 %, with a decrease in the laser output of ca. 50 % after 60 000 pump pulses (10 Hz repetition rate) in the same position of the sample, the solid copolymer with the double bonded chromophore, COP(PDiMA‐MMA), showed lasing efficiencies of up to 37 %, and no sign of degradation in the laser output after 100 000 similar pump pulses. Even under the more demanding repetition rate of 30 Hz, the laser emission from this material remained at 67 % of its initial laser output after 400 000 pump pulses, which is the highest laser photostability achieved to date for solid‐state lasers based on organic polymeric materials doped with laser dyes. This result indicates that the double covalent linkage of the BODIPY chromophore to a PMMA polymeric matrix is even more efficient than the simple linkage, for its photostabilization under laser operation.     

A simple empirical method for estimating surface water vapour pressure using MODIS near-infrared channels: applications to northern Spain's Asturias region

In this article, we present a simple methodology for obtaining algorithms to estimate surface water vapour pressure (e ₀) over cloud-free land areas using Moderate Resolution Imaging Spectroradiometer (MODIS) data. The algorithm obtained in this case is adapted to the particular climatic characteristics of the Asturias region, but the methodology can easily be extrapolated and used to obtain algorithms for other regions around the world. The proposed method estimates e ₀ from a simple linear combination of the radiances of the MODIS near-infrared (NIR) channels more commonly applied to total precipitable water (W) estimations. Comparison between the e ₀ data measured at the ground-based meteorological stations in Asturias (daily data from 2004) versus the values predicted using the proposed algorithm gives R ² = 0.76 and residual standard error (RSE) = 2.07 hPa (16%). The algorithm was tested using the data from 2008 obtained in Asturias and in two sites outside of Asturias with similar latitudes and radiosonde observations (La Coruña and Santander). The resulting validation demonstrates that the algorithm gives good results in Asturias (root-mean-square deviation (RMSD) = 2.50 hPa (19%) and bias = 1.26 hPa, with R ² = 0.65) and when La Coruña is included (R ² = 0.61), but that its validity is decreased when Santander is also included (R ² = 0.56).

The possibility of obtaining e ₀ from three global MODIS algorithms for W retrieval was also tested and compared to our algorithm. The results show that our algorithm gives better results than the International MODIS/Atmospheric InfraRed Sounder Processing Package (IMAPP) Water Vapour Near-Infrared (WVNIR) product and the Sobrino algorithm. The MODIS Total Precipitable Water (MOD05) product is worse than that obtained with our algorithm in Asturias (R ² = 0.61 vs. R ² = 0.65), but the two values are similar if the stations in La Coruña (R ² = 0.60) and Santander (R ² = 0.56) are included in the comparison. The dominant advantage of the novel algorithm proposed in this study is that it is simpler and can be produced quickly in real time.     

EPD kinetics: A review

The colloidal approach has been studied as an essential step in the tailoring of ceramic nanostructures, but most colloidal processes are limited by the complexity of preparation of highly concentrated and stable suspensions of nanoparticles and their fast ageing. Electrophoretic deposition (EPD) stands out as the most appropriate colloidal process to produce ceramic structures using low solid content sols and suspensions (<1 g/l). This characteristic drastically increases its range of technological applicability to nanoparticle assembly, becoming an alternative to the evaporative coating processes. Modelling of this direct electrically driven assembly process is key for its application to the performance of new materials on length scales of approximately 1–100 nm. In this paper, the key contributions in this field to process control and development of the electrophoretic kinetics equation are summarised.