Strength and Microstructure of Silicon Nitride Ceramics Brazed with Nickel-Chromium-Silicon Alloys

Joining of sintered Si₃N₄ was performed using a high-temperature brazing technique. Ni-based brazing alloys having the same Ni:Cr ratio as AWS BNi-5 (Ni·18Cr·19Si (at. %)) but different Si content were used as the brazing filler metals. Joining experiments were performed at 1220°C under a N₂ partial pressure of 15 Pa for different times between 5 to 15 min. The highest room-temperature four-point bend strength of the joints was 115 MPa, whereas 220 MPa was achieved when the joints were tested at 900°C. The high strength of the experimental joints was attributed to the reduction in residual stresses and formation of a CrN reaction layer at the ceramic/filler metal interface.     

A Possible Industrial Solution to Ferment Lignocellulosic Hydrolyzate to Ethanol: Continuous Cultivation with Flocculating Yeast

The cultivation of toxic lignocellulosic hydrolyzates has become a challenging research topic in recent decades. Although several cultivation methods have been proposed, numerous questions have arisen regarding their industrial applications. The current work deals with a solution to this problem which has a good potential application on an industrial scale. A toxic dilute-acid hydrolyzate was continuously cultivated using a high-cell-density flocculating yeast in a single and serial bioreactor which was equipped with a settler to recycle the cells back to the bioreactors. No prior detoxification was necessary to cultivate the hydrolyzates, as the flocks were able to detoxify it in situ. The experiments were successfully carried out at dilution rates up to 0.52 h⁻¹. The cell concentration inside the bioreactors was between 23 and 35 g-DW/L, while the concentration in the effluent of the settlers was 0.32 ± 0.05 g-DW/L. An ethanol yield of 0.42–0.46 g/g-consumed sugar was achieved, and the residual sugar concentration was less than 6% of the initial fermentable sugar (glucose, galactose and mannose) of 35.2 g/L.     

Centroid index: Cluster level similarity measure

In clustering algorithm, one of the main challenges is to solve the global allocation of the clusters instead of just local tuning of the partition borders. Despite this, all external cluster validity indexes calculate only point-level differences of two partitions without any direct information about how similar their cluster-level structures are. In this paper, we introduce a cluster level index called centroid index. The measure is intuitive, simple to implement, fast to compute and applicable in case of model mismatch as well. To a certain extent, we expect it to generalize other clustering models beyond the centroid-based k-means as well.     

KHATT: An open Arabic offline handwritten text database

A comprehensive Arabic handwritten text database is an essential resource for Arabic handwritten text recognition research. This is especially true due to the lack of such database for Arabic handwritten text. In this paper, we report our comprehensive Arabic offline Handwritten Text database (KHATT) consisting of 1000 handwritten forms written by 1000 distinct writers from different countries. The forms were scanned at 200, 300, and 600 dpi resolutions. The database contains 2000 randomly selected paragraphs from 46 sources, 2000 minimal text paragraph covering all the shapes of Arabic characters, and optionally written paragraphs on open subjects. The 2000 random text paragraphs consist of 9327 lines. The database forms were randomly divided into 70%, 15%, and 15% sets for training, testing, and verification, respectively. This enables researchers to use the database and compare their results. A formal verification procedure is implemented to align the handwritten text with its ground truth at the form, paragraph and line levels. The verified ground truth database contains meta-data describing the written text at the page, paragraph, and line levels in text and XML formats. Tools to extract paragraphs from pages and segment paragraphs into lines are developed. In addition we are presenting our experimental results on the database using two classifiers, viz. Hidden Markov Models (HMM) and our novel syntactic classifier.     

Modeling of protein adsorption to DEAE sepharose FF: Comparison of data with model simulation

The equilibrium and kinetic characteristics of the adsorption of human serum albumin (HSA) and ovalbumin (OVA) to the DEAE Sepharose FF weak anion exchanger were experimentally determined. The rate for protein adsorption was simulated with two different models, the first being based on a single lumped kinetic parameter, while the second includes the individual mass transfer processes occurring prior to the adsorption intervention, i.e., diffusion across the liquid film surrounding individual particles and diffusion within the ion exchanger particle itself. The actual adsorption of OVA to DEAE Sepharose FF in fully mixed stirred vessels and in packed bed columns was consistent with both models. In the case of HSA, however, the adsorption profile in an agitated vessel was consistent only with the pore diffusion model and neither model could correctly predict the latter part of the breakthrough profile observed in packed bed experiments.     

Crack Growth in Solid Oxide Fuel Cell Materials: From Discrete to Continuum Damage Modeling

This paper addresses the damage and fracture issues of glass and ceramic materials used in solid oxide fuel cells. Analyses of an internal crack and of an interface crack between dissimilar materials were conducted using a modified boundary layer modeling approach. In this approach, fracture is allowed to occur in a small process window situated at an initial crack tip. Elastic displacement crack-tip fields are prescribed as remote boundary conditions. Crack propagation was first modeled discretely. Next, a continuum damage mechanics (CDM) model for brittle materials was developed to capture damage and crack growth in the process window. In particular, the damage model was applied to a glass-ceramic material that had been developed in-house for sealing purposes. Discrete and continuum damage solutions were then compared. Finally, the CDM model was used to determine the crack propagation direction as a function of a mode mixity measure.     

Water-soluble Copolymers of N-vinylpyrrolidone and Vinyl Acetate: Synthesis, Characterization, and Monomer Reactivity at High Conversions

Homogeneous copolymers of N-vinylpyrrolidone (VP) and vinyl acetate (VA) which form clear aqueous solutions were prepared by free radical polymerization in a solution of isopropanol alcohol, using 2,2-azobisisobutyronitrile as an initiator. They were characterized by FTIR, ¹H-NMR, and element analysis studies. The reactivity ratios of the monomer were computed by the Extended Kelen–Tüdós method at high conversions, using data from both ¹H-NMR and elemental analysis studies. The reactivity ratios of VP and VA in a homogenous copolymer were observed to be very different from that of a heterogeneous copolymer. Additional information was obtained by finding out the sequence length distribution for copolymers.     

A 60‐GHz on‐chip slot‐array antenna in integrated‐passive‐device technology for antenna‐in‐package applications

A new millimeter‐wave antenna structure on a low‐cost, production platform integrated passive device technology is presented. The antenna consists of a 2‐by‐1 array of slot antennas at 60 GHz. An in‐house developed on‐chip antenna measurement setup was used to characterize the fabricated antenna. The measurement results show an antenna gain of more than 5 dBi with a return loss of 18 dB at 60 GHz. The better‐than‐10‐dB impedance bandwidth of the antenna covers the 60‐GHz unlicensed band from 57 to 64 GHz. The 3‐dB beamwidths of the antenna are 105° and 76° at E‐plane and H‐plane at 60 GHz, respectively. The size of the die of the antenna is 2 mm × 4.5 mm. © 2013 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:155–160, 2014.     

Low‐velocity impact of nanocomposite and polymer plates

Nanocomposites are more widely studied today because of higher stiffness, decreased permeability, thermal stability, and many other properties superior to those of regular polymers. However, manufacturers are concerned about implementing nanocomposites because of their lower impact properties with respect to the base polymer. This study focused on low‐velocity impact tests of a thermoplastic olefin by itself and with 5 wt % nanoclay. The impact tests were conducted at ?40, 23.9, and 65.6°C until the polymer and nanocomposite plates experienced complete striker penetration. The force–time and force–deflection responses obtained from the impact testing provided a means of comparing the impact performances of the two materials. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 2309–2315, 2005     

Linear principal transformation: toward locating features in N-dimensional image space

Projection Functions have been widely used for facial feature extraction and optical/handwritten character recognition due to their simplicity and efficiency. Because these transformations are not one-to-one, they may result in mapping distinct points into one point, and consequently losing detailed information. Here, we solve this problem by defining an N-dimensional space to represent a single image. Then, we propose a one-to-one transformation in this new image space. The proposed method, which we referred to as Linear Principal Transformation (LPT), utilizes Eigen analysis to extract the vector with the highest Eigenvalue. Afterwards, extrema in this vector were analyzed to extract the features of interest. In order to evaluate the proposed method, we performed two sets of experiments on facial feature extraction and optical character recognition in three different data sets. The results show that the proposed algorithm outperforms the observed algorithms in the paper and achieves accuracy from 1.4 % up to 14 %, while it has a comparable time complexity and efficiency.