The Dead Sea hydrography from 1992 to 2000

The modern hydrological regime of the Dead Sea is strongly affected by anthropogenic activity. The natural fresh water budget has changed mainly due to the drastic reduction of runoff. Since 1977, the surface level of the Dead Sea has been lowered by an average rate of about 60 cm/year and for the period from 1998 to 2000, the lowering rate has reached about 100 cm/year. As a result of the runoff reduction, the upper layer salinity of the Dead Sea has increased and the gravitational stability of the water body was diminished. Eventually, during the winter of 1978–1979, the lake waters overturned, bringing to an end the long-term stable meromictic¹ hydrological regime. The lake entered a new phase in which its hydrological regime switches between holomictic and meromictic regimes, depending on the size of the runoff into the lake (i.e. the amount of precipitation in the lake's watershed). The first holomictic period, 1979–1980, lasted for 2 months only. It was succeeded by a 4-year meromictic period (1980–1983). The second holomictic period lasted for 9 years (1983–1991). The rainy winter of 1991–1992 resulted in an almost 2-m sea level rise. The upper layer with a relatively low salinity was restored and a new meromictic period persisted for 4 years, until winter 1995–1996. During the last meromictic period, the hydrological regime of the Dead Sea was characterized by following long-term trends: the depth of the summer thermocline increased from 12–15 to 25–30 m; the quasi-salinity of the upper layer, initially of about 164 kg/m³, increased rapidly at a rate of about 16–18 kg/m³/year; the quasi-salinity of the deep water, initially of about 235 kg/m³, decreased slowly at a rate of about 0.08–0.10 kg/m³/year (for the sake of comparison, a quasi salinity of 235 kg/m³ is the equivalent of 280‰ “usual” salinity); and the winter minimal temperature of the upper layer, initially of about 16 °C, increased rapidly at a rate of about 2 °C/year. In November 1995, the latest meromictic period of the Dead Sea came to an end. During the present holomictic period, 1996–2000, the hydrological regime of the Dead Sea is also characterized by long-term trends: the quasi-salinity of the entire Dead Sea increased at a rate of about 0.5 kg/m³/year, with practically no decrease during the winters; the temperature of the deep water mass increased with a rate of about 0.25 °C/year; and the period of vertical convection of the entire water column, initially about 3 months, increased at a rate of about 1 week/year. Moreover, we observed that the temperature and salinity of the bottom layer in the deepest part of the Dead Sea raised by about 0.5–0.6 °C and 0.15–0.25 kg/m³ during each holomictic summer.     

Simulation‐based estimates of delays at freeway work zones

Work zone related traffic delay is an important cost component on freeways with maintenance activities. This study demonstrates that delays may be underestimated by using the deterministic queuing theory. Computer simulation is a valuable approach of estimating delay under a variety of existing and future conditions. However, a single simulation run, which can be quite costly in terms of both computer and analyst time, produces a delay estimate for only one traffic level under one set of conditions. A method is developed in this paper to approximate delays by integrating limited simulation data, obtained from CORSIM and the concept of deterministic queuing theory, while various geometric conditions and time‐varying traffic distribution are considered. A calibrated and validated simulation model that can reflect work zone traffic operations on a segment of Interstate 1–80 in New Jersey is used to generate data for developing the proposed model. The comparison of delays estimated by the deterministic queuing model and the proposed model is conducted, while factors affecting the accuracy of the delay estimates are discussed.     

Modeling the bilateral micro‐searching behavior for urban taxi services using the absorbing markov chain approach

This paper develops a mathematical model that is based on the absorbing Markov chain approach to describe taxi movements, taking into account the stochastic searching processes of taxis in a network. The local searching behavior of taxis is specified by a logit form, and the O‐D demand of passengers is estimated as a logit model with a choice of taxi meeting point. The relationship between customer and taxi waiting times is modeled by a double‐ended queuing system. The problem is solved with a set of non‐linear equations, and some interesting results are presented. The research provides a novel and potentially useful formulation for describing the urban taxi services in a network.     

Algerian Eddies lifetime can near 3 years

The Algerian Current (AC) is unstable and generates mesoscale meanders and eddies. Only anticyclonic eddies can develop and reach diameters over 200 km with vertical extents down to the bottom (3000 m). Algerian Eddies (AEs) first propagate eastward along the Algerian slope at few kilometers per day. In the vicinity of the Channel of Sardinia, a few AEs detach from the Algerian slope and propagate along the Sardinian one. It was hypothesized that AEs then followed a counter-clockwise circuit in the eastern part of the basin. Maximum recorded lifetimes were known to exceed 9 months. Within the framework of the 1-year Eddies and Leddies Interdisciplinary Study off Algeria (ELISA) experiment (1997–1998), we exhaustively tracked two AEs, using mainly an 3-year time series of NOAA/AVHRR satellite images. We show that AEs lifetimes can near 3 years, exceeding 33 months at least. We also confirm the long-lived AEs preferential circuit in the eastern part of the Algerian Basin, and specify that it may include several loops (at least three).     

A Simplified Framework for String Stability Analysis of Automated Vehicles*

Automated vehicles traveling in platoons must exhibit stability both individually and as a group, a property referred to as “string stability”. We propose a new framework for evaluating the longitudinal string stability properties of platoons of automated vehicles. In this framework, the platoon is considered to be a mass-spring-damper system with linear characteristics. The resulting closed-loop representation yields transfer functions and impulse responses that can be analyzed to determine the string stability properties of the platoon. This framework facilitates qualitative comparisons of the effects of various controller characteristics, such as time headway and intervehicle communication, on string stability.     

The sequenced activity mobility simulator (SAMS): an integrated approach to modeling transportation, land use and air quality

The persistence of environmental problems in urban areas and the prospect of increasing congestion have precipitated a variety of new policies in the USA, with concomitant analytical and modeling requirements for transportation planning. This paper introduces the Sequenced Activity-Mobility Simulator (SAMS), a dynamic and integrated microsimulation forecasting system for transportation, land use and air quality, designed to overcome the deficiencies of conventional four-step travel demand forecasting systems. The proposed SAMS framework represents a departure from many of the conventional paradigms in travel demand forecasting. In particular, it aims at replicating the adaptative dynamics underlying transportation phenomena; explicitly incorporates the time-of-day dimension; represents human behavior based on the satisficing, as opposed to optimizing, principle; and endogenously forecasts socio-demographic, land use, vehicle fleet mix, and other variables that have traditionally been projected externally to be input into the forecasting process.     

单电子器件Ⅰ-Ⅴ特性的半经曲拟合

本文在单电子器件半经典的双隧道结模型的基础上，通过对主主程的数值求解，对Au纳米粒子组装体系的库仑台阶现象进行了拟合．单电子器件的半经典拟合对于单电子器件的设计有很大的指导作用．     

Level and attitude control of the active suspension system with integral and derivative action

A 7-DOF full-car model with optimal active control suspension is utilized to evaluate the vehicle dynamic performances which are achieved through proposed controllers. The optimal controller, which includes the integral action for the suspension deflection, considerably improves the attitude control of a vehicle because the rolling and pitching motion in cornering and braking maneuvers are reduced, respectively. In the viewpoint of level control, the integral control acting on the suspension deflection results in the zero steady-state deflection in response to static body forces and ramp road input. The dynamic characteristics of the suspension control system are evaluated in terms of time domain and frequency domain. The simulations in the time domain demonstrate the advantages of the active suspension system obtained by penalizing the integral and derivative of suspension deflections and the derivative of roll and pitch angles in the performance index. The frequency characteristic curves obtained by simulations regarding integral action or derivative action show the increase of both ride comfort and road-holding performances by maximizing the use of suspension deflections. The potential of derivative control is shown by the performances of the car traveling over a bump and braking.     

Aircraft and maintenance scheduling support,mathematical insights and a proposed interactive system

In this paper we first review the current practice of operative aircraft and maintenance scheduling at the Hungarian Airlines. The ideas to be included in the proposed operative scheduling support system mean new contributions from both the algorithmic and human-computer interaction points of view. The algorithm is based on new graph theoretical results which were motivated by the necessity of combining a given flight schedule with the strict maintenance requirements of the aircraft. Aircraft rotation corresponds in mathematical terms to the coloring of an interval graph with colors representing the tail numbers in such a way that the vertices corresponding to maintenance checks are colored in advance. The human-computer interface is built on the Microsoft Windows graphics environment, which allows a simultaneous, visual and active contact with all necessary information and methods.