基于有理多项式模型的星载高分InSAR影像制作数字高程模型的研究

合成孔径雷达干涉测量是一种利用SAR影像复数据的相位信息提取地面三维信息的技术,它通过获取地面目标在两幅SAR影像上的相位差值来解算该点的三维坐标。有理多项式（RPC,Rational Polynomial Coefficient）模型作为一种数学意义上的几何模型,它独立于传感器和平台,简单且具有通用性,可建立地面任意坐标与影像空间的关系。本文在RPC模型用于替代星载SAR的距离多普勒模型和星载InSAR的干涉相位方程基础上,研究 RPC模型应用于星载高分辨率InSAR影像制作DEM的可行性和精度。利用兰州COSMO-SkyMed数据和资源三号三线阵数据制作的DEM为参考数据进行实验验证,RPC模型用于InSAR技术生成的DEM,中误差为7.55米。     

基于Global Mapper的DEM检查方法

Global Mapper是一款地图绘制软件。本文结合辽宁省测绘局1∶10000 DEM制作项目,阐述了利用Global Mapper软件对DEM最终成果进行质量检查的具体检查方法。     

规则格网DEM地形综合方法分析

针对当前丰富多样的DEM地形综合模型,分类阐述其综合原理、关键技术及优缺点,以黄土丘陵1：1万DEM为基础,对其地形综合效果进行对比分析。研究结果表明：现有的DEM地形综合模型各有优缺点;不同综合模型综合后的地形,高程数值随着综合尺度的增加,存在显著差异,而且不同综合模型对流域边界的综合处理也存在显著差异,没有形成客观有效的流域边界描述;当前困扰DEM地形综合的关键问题,是缺乏不同尺度下地形综合质量的客观评价标准,致使现有综合模型地形综合结果和DEM格网分辨率之间没有建立本应存在的内在联系,有待进一步深入研究。     

中国地区SRTM3 DEM高程精度质量评价

为揭示我国SRTM3DEM数据高程精度质量,结合已开展过SRTM3DEM高程精度质量评价工作的局部地区的研究,考虑空间分布情况,选取新疆、辽宁、山东、浙江、海南5个地区的平原、丘陵、盆地、山地等地形区域作为典型研究区,并以1∶5万DEM为假定真值、以1∶25万DEM为参照,通过DEM面误差可视化分析、DEM面误差信息熵模型、中误差模型等方法对SRTM3DEM数据高程精度质量做了分析。计算结果表明我国SRTM3DEM数据高程精度质量受地形影响并存在一定的空间差异性,同时我国范围内SRTM3DEM数据高程精度质量整体上要高于1∶25万DEM。     

基于DEM的地形分类方法研究

坡度是描述地表形态的基本指标。利用ArcGIS软件对已有的1∶10 000 DEM数据进行坡度分析,能够正确高效地识别地形特征,确定对应图幅所属的地形类别。研究成果已正式应用于河北省第一次全国地理国情普查和其他测绘地理信息管理工作。     

Volume estimation of small scale debris flows based on observations of topographic changes using airborne LiDAR DEMs

This paper describes a geographic information system(GIS)-based method for observing changes in topography caused by the initiation, transport, and deposition of debris flows using highresolution light detection and ranging(LiDAR) digital elevation models(DEMs) obtained before and after the debris flow events. The paper also describes a method for estimating the volume of debris flows using the differences between the LiDAR DEMs. The relative and absolute positioning accuracies of the LiDAR DEMs were evaluated using a real-time precise global navigation satellite system(GNSS) positioning method. In addition, longitudinal and cross-sectional profiles of the study area were constructed to determine the topographic changes caused by the debris flows. The volume of the debris flows was estimated based on the difference between the LiDAR DEMs. The accuracies of the relative and absolute positioning of the two LiDAR DEMs were determined to be ±10 cm and ±11 cm RMSE, respectively, which demonstrates the efficiency of the method for determining topographic changes at an scale equivalent to that of field investigations. Based on the topographic changes, the volume of the debris flows in the study area was estimated to be 3747 m3, which is comparable with the volume estimated based on the data from field investigations.     

包头市人工影响天气综合业务系统中三维地形图的实现方法

在"包头市人工影响天气综合业务系统"中以1:5万的数字高程模型(DEM)为基础,将图像平面与三维地形叠加,采用三维场景的模拟方法绘制包头地形图,其核心是三维地形的可视化显示。三维地形可视化通常采用DEM作为基础地理数据,在上面叠加遥感影像,这就保证了三维模型能够较为真实地反映实际的场景。     

Snake Model for the Extraction of Loess Shoulder-line from DEMs

Shoulder lines are the most important landform demarcations for geographical analysis,soil erosion modeling and land use planning in the Loess Plateau area of China.This paper proposes an automatic,effective and accurate method of determining loess shoulder line from DEMs by integrating a hydrological D8 algorithm and a snake model.The watershed boundary line is adopted as the initial contour which evolves to identify the exact position of loess shoulder-line by the guidance of an external force of snake model from DEMs.Experiments show that the method overcomes the difficulties in both threshold selection for edge detection and the disconnecting issues in former extraction approaches.The accuracy evaluation of shoulder-line maps from the two test sites of the loess plateau area show obvious improvements in the extraction.The average contour matching distance of the new method is 12.0 m on 5 m resolution DEM,and shows improvement in the accuracy and continuity.The comparisons of accuracy evaluations of the two test sites show that the snake model method performs better in the loess plain area than in the area with high gully density.     

Propagation of vertical and horizontal source data errors into a TIN with linear interpolation

Digital elevation models (DEMs) have been widely used for a range of applications and form the basis of many GIS-related tasks. An essential aspect of a DEM is its accuracy, which depends on a variety of factors, such as source data quality, interpolation methods, data sampling density and the surface topographical characteristics. In recent years, point measurements acquired directly from land surveying such as differential global positioning system and light detection and ranging have become increasingly popular. These topographical data points can be used as the source data for the creation of DEMs at a local or regional scale. The errors in point measurements can be estimated in some cases. The focus of this article is on how the errors in the source data propagate into DEMs. The interpolation method considered is a triangulated irregular network (TIN) with linear interpolation. Both horizontal and vertical errors in source data points are considered in this study. An analytical method is derived for the error propagation into any particular point of interest within a TIN model. The solution is validated using Monte Carlo simulations and survey data obtained from a terrestrial laser scanner.     

南宁市六城区数字高程模型制作及应用前景

以南宁市六城区数字高程模型制作为例,对南宁市数字高程模型的制作过程进行了系统的阐述,由此针对制作大比例尺数字高程模型提出几点建议,最后探讨了其社会经济效益和推广前景.