Gas treatment protection of metallic lithium anode

The effects of different coating layers on lithium metal anode formed by reacting with different controlled atmospheres(argon,CO_2–O_2(2:1),N_2,and CO_2–O_2–N_2(2:1:3))have been investigated.The obtained XRD,second ion mass spectroscopy(SIMS),and scanning probe microscope(SPM)results demonstrate the formation of coating layers composed of Li_2CO_3,Li_3N,and the mixture of them on lithium tablets,respectively.The Li/Li symmetrical cell and Li/S cell are assembled to prove the advantages of the protected lithium tablet on electrochemical performance.The comparison of SEM and SIMS characterizations before/after cycles clarifies that an SEI-like composition formed on the lithium tablets could modulate the interfacial stabilization between the lithium foil and the ether electrolyte.     

集装箱检测系统用加速器电子枪的特性研究

 研究了固定式海关集装箱检测系统用9MeV电子行波直线加速器电子枪的结构特点和束流特性。该电子枪采用钪酸盐阴极,在灯丝电流为2.4A,阳极引出电压为-40kV的工作条件下,由电子枪发射到加速器入口处的脉冲电流强度为300mA,在加速器出口处,束斑截面小于φ2mm;打靶后,产生的X射线剂量率大于30cGy/(min× m)。电子枪的良好特性及束流强度保证了集装箱检测图像所需的高分辨率的要求。为保证满足更换电子枪时的安装要求,利用EGUN程序模拟计算了电子枪的结构及束流特性,为实际装配和使用提供了参考尺寸和调试参数。     

磷酸根与磷酸基水化作用之比较—红外光谱研究

本文运用傅立叶变换红外光谱，对水／ＮａＤＥＨＰ／正庚烷反胶束体系中的磷酸根及磷酸三丁酯－水体系中磷酸基的水化作用进行了研究。     

多空间尺度下的金属锂负极表征技术

金属锂因为其优秀的特性被认为是未来锂电池负极的最终之选。然而目前金属锂负极在旧有液态体系中的研究陷入瓶颈,在新兴固态体系中的挑战层出不穷。想要实现金属锂负极的实用化,必须加深对金属锂负极基础科学问题的认识。本文系统论述了多空间尺度下金属锂的电极行为与对应的表征技术。首先综述了多空间尺度下金属锂负极的基础科学和应用技术问题,结合近年来的工作,对全空间尺度下的先进表征手段做了梳理,分析了从原子级到宏观尺度各种表征手段的技术特点,并重点讨论了各类表征技术在研究固态体系中金属锂负极时的特点与可能的发展方向。     

多人随机行走激励下人行桥振动分析

大跨人行桥具有轻质、轻柔、阻尼小及低频等特点,基频较小时对人行荷载激励较敏感,但目前对其在多人随机行走下的随机振动问题研究较少。本文基于标准步行荷载,使用人行桥多点加载模型,推导了多人随机行走下大跨人行桥振动响应时程的精细时域计算方法,并以此验证本文提出的计算人行桥随机振动的更简便的谱分析方法;通过构造桥上落足点的荷载时程,变换得到荷载时程功率谱,再利用荷载功率谱并借鉴林家浩教授提出的虚拟荷载法推导出反映行人舒适度的均方根加速度频域计算方法。     

Polarization-independent terahertz wave modulator based on graphene-silicon hybrid structure

In this study, we propose and demonstrate a broadband polarization-independent terahertz modulator based on graphene/silicon hybrid structure through a combination of continuous wave optical illumination and electrical gating.Under a pump power of 400 mW and the voltages ranging from-1.8 V to 1.4 V, modulation depths in a range of-23%–62% are achieved in a frequency range from 0.25 THz to 0.65 THz. The modulator is also found to have a transition from unidirectional modulation to bidirectional modulation with the increase of pump power. Combining the Raman spectra and Schottky current–voltage characteristics of the device, it is found that the large amplitude modulation is ascribed to the electric-field controlled carrier concentration in silicon with assistance of the graphene electrode and Schottky junction.     

Equivalent circuit analysis of terahertz metamaterial filters

An equivalent circuit model for the analysis and design of terahertz (THz) metamaterial filters is presented.The proposed model,derived based on LMC equivalent circuits,takes into account the detailed geometrical parameters and the presence of a dielectric substrate with the existing analytic expressions for self-inductance,mutual inductance,and capacitance.The model is in good agreement with the experimental measurements and full-wave simulations.Exploiting the circuit model has made it possible to predict accurately the resonance frequency of the proposed structures and thus,quick and accurate process of designing THz device from artificial metamaterials is offered.     

电子加速器屏蔽室空间散射的蒙特卡罗计算

为解决电子直线加速器屏蔽室的空间散射计算相关问题,采用蒙特卡罗程序MCNP4B进行模拟,使用分步计算的方法,结合分裂和轮盘赌技巧,计算出9MeV驻波直线加速器运行时的空间散射剂量率大小.并实际测量了加速器运行时屏蔽室周围距地面上方1m处的空间散射剂量分布.将计算得到的结果、计算空间散射的经验公式结果和实际测量的结果三者进行了比较分析.结果表明:蒙特卡罗方法计算值比较符合实际测量值,经验公式计算值则存在一定的偏差.     

轫致辐射靶的发射率及角分布分析

计算了不同能量下，几种常用单靶(W,Cu,Ta,Au)的X射线前向发射率和角分布, 从理论分析和蒙特卡罗方法模拟计算两方面分析了产生的X射线发射率及其角分布与靶参数和束流参数的关系, 并与已发表的数据及实验结果比较, 结果一致, 可为设计产生X射线的电子加速器及靶提供参数依据.