HA型粘结剂性能评判的研究

冷固结球团直接还原工艺成功的关键因素之一是成型粘结剂的选用。粘结剂性能评判 ,传统的方法是通过考查球团矿的机械强度来说明粘结剂性能的优劣 ,步骤繁锁。经过试验研究 ,本文提出了用粘度大小来评判粘结剂性能的直接方法并从理论上进行了论证。对于 HA型复合粘结剂 ,在六速旋转粘度计上测量 ,50 g复合粘结剂的粘度若大于或等于 6.5× 1 0 -3 Pa·s,表示粘结剂性能较好 ,能满足铁精矿冷固球团直接还原工艺的要求 ;若小于或等于 3.0× 1 0 -3 Pa· s,则表示该粘结剂性能较差。     

Nondestructive evaluation of the characteristics of degraded materials using backward radiated ultrasound

The frequency dependency of Rayleigh surface wave is investigated indirectly by measuring the angular dependency of the backward radiation of the incident ultrasonic wave in two kinds of degraded specimens by scuffing or corrosion. Then, the frequency dependency is compared with the residual stress distribution or the corrosion-fatigue characteristics for the scuffed or corroded specimens, respectively. The width of the backward radiation profile increases with the increase of the variation in residual stress distribution for the scuffed specimens. In the corroded specimens, the profile width decreases with the increase of the effective aging layer thickness and is inversely proportional to the exponent, m, in the Paris’ law that can predict the crack size increase due to fatigue. The result observed in this study demonstrates high potential of backward radiated ultrasound as a tool for nondestructive evaluation of subsurface gradient of material degradation generated by scuffing or corrosion.     

化学事故危害评估

根据化学事故危害的主要影响因素对化学事故进行危害评估,考查了危害纵深、人员杀伤率、危害地域估算、爆炸燃烧事故危害等内容。     

Results of a User Study on 2D Hurricane Visualization

We present the results from a user study looking at the ability of observers to mentally integrate wind direction and magnitude over a vector field. The data set chosen for the study is an MM5 (PSU/NCAR Mesoscale Model) simulation of Hurricane Lili over the Gulf of Mexico as it approaches the southeastern United States. Nine observers participated in the study. This study investigates the effect of layering on the observer's ability to determine the magnitude and direction of a vector field. We found a tendency for observers to underestimate the magnitude of the vectors and a counter‐clockwise bias when determining the average direction of a vector field. We completed an additional study with two observers to try to uncover the source of the counter‐clockwise bias. These results have direct implications to atmospheric scientists, but may also be able to be applied to other fields that use 2D vector fields.     

Education-driven research in CAD

We argue for a new research category, named education-driven research (EDR), which fills the gap between traditional field-specific research that is not concerned with educational objectives and research in education that focuses on fundamental teaching and learning principles and possibly on their customization to broad areas (such as mathematics or physics), but not to specific disciplines (such as CAD). The objective of EDR is to simplify the formulation of the underlying theoretical foundations and of specific tools and solutions in a specialized domain, so as to make them easy to understand and internalize. As such, EDR is a difficult and genuine research activity, which requires a deep understanding of the specific field and can rarely be carried out by generalists with primary expertise in broad education principles. We illustrate the concept of EDR with three examples in CAD: (1) the Split and Tweak subdivisions of a polygon and its use for generating curves, surfaces, and animations; (2) the construction of a topological partition of a plane induced by an arbitrary arrangement of edges; and (3) a romantic definition of the minimal and Hausdorff distances. These examples demonstrate the value of using analogies, of introducing evocative terminology, and of synthesizing the simplest fundamental building blocks. The intuitive understanding provided by EDR enables the students (and even the instructor) to better appreciate the limitations of a particular solution and to explore alternatives. In particular, in these examples, EDR has allowed the author to: (1) reduce the cost of evaluating a cubic B-spline curve; (2) develop a new subdivision curve that is better approximated by its control polygon than either a cubic B-spline or an interpolating 4-point subdivision curve; (3) discover how a circuit inclusion tree may be used for identifying the faces in an arrangement; and (4) rectify a common misconception about the computation of the Hausdorff error between triangle meshes. We invite the scientific community to encourage the development of EDR by publishing its results as genuine research contributions in peer-reviewed professional journals.     

Burner Performance Evaluation Using Test Code

Development of new burner technology is common practice nowadays. Standardized test codes are available to conduct tests to determine operating characteristics and thermal performance of different parts of steam generating units. This paper describes the results of testing performed to evaluate thermal efficiency of a 74.5?kW fire-tube steam generator fired with a new premixed flame burner in comparison to a typical standard-retrofit diffusion flame burner system. Two premixed flame burners sized at 7.6 and 10.1?cm were tested. Testing was performed in accordance with the ASME PTC 4.1 Power Test Code. The evaluation was conducted in the range of small- to mid-sized, natural gas-fired applications, from 1.06?to?2.64×106?kJ/h. The environmental nitrogen oxide (NOx) emissions performance was also compared for both burner technologies. The results of this evaluation indicate that firing the test boiler with the 7.6?cm new burner slightly improves unit thermal efficiency by 4.0–3.3% for a unit load ranging from approximately 1.06?to?1.79×106?kJ/h, respectively. Operation with the 10.1?cm new burner improves the thermal efficiency by approximately 1.6% at 2.32×106?kJ/h. The uncertainty in the measurements used in the efficiency calculations should account for approximately ±1.5% uncertainty in the reported gross efficiency. Reductions in NOx emissions of the order of 10% resulted from operation with the new premixed flame burners.     

盖层封闭能力的灰聚类评价方法

提出灰聚类评价方法，用于盖层封闭能力定量评价。所有被评价对象构成聚类对象集，所有评价指标构成评价指标集，所划分的盖层封闭能力等级构成聚类的灰类集，按照最大聚类权确定对象所属的灰类，即盖层的封闭能力级别。评价流程是：确定指标灰类模式→数据预处理→利用聚类公式计算→利用最大聚类权准则抉择。这种方法避免了加法评分法要依靠人的主观经验划定总评分值的问题，而且由于把评价对象视为“灰”的，具有处理边缘信息的能力。以琼东南盆地３个主要探区的盖层封闭性评价为例，介绍了灰聚类评价的具体应用方法。灰聚类评价方法同样可用于储集层评价、圈闭评价等地质问题的定量研究。表２参３（王孝陵摘     

电化学氧化锆氧传感器的多孔铂电极(连载二)——(二)多孔铂电极的评价指标分析

测量了表面电阻值不同的两个电极试样的厚度及直流极化特性曲线,并由此分析了以表面电阻值作为电极评价指标的模糊性,提出了以电极极化程度来评价电极性能的概念。     

Tracing success: graphical methods for analysing successful collaborative problem solving

The aim of this paper is to evaluate the use of trace diagrams for analysing collaborative problem solving. The paper describes a study where trace diagrams were used to analyse joint navigation in a virtual environment. Ten pairs of undergraduates worked together on a distributed virtual task to collect five flowers using two bees with each participant controlling one of the bees. This task is used extensively in research on multi-robot systems. The joint navigation of the pairs was analysed using trace diagrams. They showed that more successful pairs divided the task up, showed very little overlap and very little backtracking. Whereas, the less successful pairs, showed no task division, there was significant overlap and extensive backtracking. From this analysis we developed numerical measures of task division, overlap and backtracking. Task division was significantly and negatively related with task performance. Backtracking and overlap were significantly and positively correlated.