未掺杂半绝缘GaAs中受主及电中性EL2分布的研究

测量了未掺杂半绝缘（ＳＩ）ＬＥＣＧａＡｓ中总的、电中性的ＥＬ２及净受主浓度分布和碳分布。结果表明，总ＥＬ２浓度径向分布呈Ｗ形而不是均匀的，净受主浓度径向分布呈∧形或∩形而不是Ｍ形。电中性ＥＬ２的Ｗ形径向分布由总ＥＬ２浓度的Ｗ形径向分布决定，而不是由于净受主的不均匀分布。有些样品中净受主浓度远大于碳浓度．意味着这些样品中除碳外还存在高浓度的其它受主。     

The Effect of Moisture Content on the Conversion of Ergosterol to Vitamin D in Shiitake Mushrooms

The distribution of ergosterol in different parts of shiitake mushrooms was studied in order to optimize the conversion of ergosterol to vitamin D₂ during drying. The effect of moisture on the conversion of ergosterol to vitamin D₂ was also investigated by adjusting the moisture content of fresh mushrooms to different levels in a large vacuum desiccator and subjecting them to UV irradiation at 290-320 nm wavelength, for 2 h. The moisture, ergosterol and vitamin D₂ contents were determined using standard procedures. It was found that the ergosterol content on a dry matter basis of fresh shiitake mushroom was highest in the gills (10.6 ± 0.99 mg/g DM), followed by the cap or pileus (5.34 ± 0.64 mg/g DM) and was least in the stalk or stipe (2.97 ± 0.56). The moisture content had a marked influence on the conversion of ergosterol to vitamin D₂, the best conversion taking place at a moisture content of about 70% on a wet basis.     

~(141)CeO_2经气管内注入后在肺及淋巴结内的动态分布

本文报告了应用γ放射性测量和放射自显影方法,观察~(141)CeO_2经气管内注入后在大鼠肺及局部淋巴结中动态分布的特点。实验结果表明,~(141)Ce 在肺内与在不同部位、不同个体和单个淋巴结中的分布都是很不均匀的;其滞留量随时间而变化。     

东濮凹陷泥岩裂缝油气藏形成条件及分布特点

结合东濮凹陷地质特点，探讨研究了东濮凹陷泥岩裂缝油气藏形成的地质条件，东濮凹陷油气源岩发育，泥岩裂缝发育，泥岩裂缝油气成藏有着较好的成藏条件，是一种新的油气藏类型，有着良好的勘探前景，同时对泥岩裂缝油气藏在东濮凹陷的分布特点进行了研究。指出高压区及超高压区，盐岩分布区，构造转换带是寻找这类油气藏的有利地区。层系上，沙三^2-4是勘探这类油气藏的有利层系，一些稳定的泥，页岩标志层也是寻找这类油气藏的有利层段。     

遗传算法在双向反射分布函数模型参数优化中的应用

对以大理石为代表的材料进行了双向反射分布函数测量实验，得出了样品的半球反射率，并研究了其随入射、反射天顶角等参数变化的规律。采用遗传算法建立了金刚砂和大理石材料的双向反射分布函数的参数模型，对模型进行参数反演时，通过遗传算法进行优化。拟合后的实验数据曲线表明，利用遗传算法得到的结果具有较好的一致性。     

Porosity distribution in highly compressible cake: Experimental and theoretical verification of the dense skin

The rate of filtration and the water content of cake are influenced by the existence of a dense skin in a highly compressible cake. The phenomenon of the dense skin has been rarely studied, and its existence has not been verified experimentally. In this study, the porosity variation in a very compressible cake is measured by using a new experimental apparatus, and with this the existence of dense skin has been established experimentally. ‘Unified theory on solid-liquid separation’, a recently developed theory, is utilized for calculating the porosity variation in a very compressible cake.     

根据概率分布建立有源器件的统计模型

给出一种新的统计模型的建立方法。在有源器件物理模型的基础上，通过优化物理模型参数的均值和均方根，使所建立统计模型的Ｓ参数在各个频率上的概率分布逼近测量数据的概率分布。从建立微波ＭＥＳＦＥＴ统计模型的算例结果看出，本方法不仅能比较好地拟合样本Ｓ参数的概率分布，而且提高了计算效率。     

XD－YES：IC功能成品率模拟器的实现

首先建立缺陷空间分布和粒径分布的模型，并讨论了缺陷通过版图产生电路错误的过程，给出了ＩＣ功能成品率模拟器ＸＤ－ＹＥＳ的实现。用ＸＤ－ＹＥＳ对微电子测试图和实际ＩＣ的功能成品率模拟和分析表明，其结果与实际符合很好，从而表明ＸＤ－ＹＥＳ的可行性和实用性。     

Evaluation of pipe whip impacts on neighboring piping and walls of the Ignalina Nuclear Power Plant

Stress corrosion cracks have been discovered in Group Distribution Headers (GDH) at the Ignalina and Chernobyl Nuclear Power Plants. This increases the probability that a guillotine pipe break can occur that creates a whipping pipe (GDH) with the potential to damage surrounding structures—i.e. adjacent GDH and its attached piping or adjacent reinforced concrete compartment wall. The GDH is the most important component for reactor safety in case of an accident. Emergency Core Cooling System (ECCS) piping is connected to the GDH piping such that, during an accident, coolant passes from the ECSS into the GDH.Presented in this paper is the transient analysis of a Group Distribution Header following a guillotine break at the blind end of the header. Using a very conservative force loading function, the transient response of a whipping RBMK-1500 GDH along with neighboring concrete walls and pipelines is obtained using finite element methodology.The results of the study, assuming that the impacted GDH does not suffer stress corrosion cracking, indicate that the structural integrity of the compartment should be maintained and failure should not propagate from GDH to GDH.