雪宝顶碱性花岗岩岩石地球化学与成矿控制

对雪宝顶碱性花岗岩具有高丰度的W、Sn、Be含量和W、Sn矿化花岗岩的微量元素组合特征进行了分析，结果显示：稀土元素具有∑REE含量与LREE／HREE比值偏低和负Eu异常的特点；元素比值K／Rb，U／Th，Nb／Ta的规律性变化以及矿脉产状特征等表明W-(Sn)-Be脉状矿床形成于岩浆演化晚期，与岩浆期后的热液活动有关。     

珠江口水域微表层中的痕量金属

采用自制滚筒式自动采样器采样，研究了珠江口水域微表层中Ｆｅ，Ｍｎ，Ｃｕ，Ｐｂ，Ｚｎ，Ｃｄ的含量、分布变化及富集状况。并通过颗粒痕量金属／颗粒Ｆｅ比值计算，探讨了痕量金属的来源。结果表明：Ｃｕ，Ｐｂ，Ｚｎ，Ｃｄ在微表层的平均富集系数分别为２．３，１．４，３．０和１．９。颗粒态Ｆｅ，Ｍｎ的平均富集系数为１．１和０．９。各种金属有明显的季节和空间变化，有各种不同的来源。     

Growth Aspects and Magnesium Carbonate Concentrations of the Reef Building Octocoral Heliopora coerulea (Pallas) after Transplantation

Abstract. An experiment to test C have's hypothesis on temperature dependent MgCO₃ concentrations in marine calcareous skeletons was undertaken by transplanting colonies of Heliopora coerulea. The corals were transferred from a shallow lagoon with high average temperatures to the outer bottom of a fringing reef, 16 m depth, with low average temperatures. Against expectation, a statistically significant increase of average mol % concentrations from 0.48 to 0.54 % for upper growth regions and from 0.49 to 0.62% for lower growth regions was obtained. Temperature records during the experimentation period and the above data indicate that the mol% MgCO₃ concentration in the skeleton of living Heliopora colonies increases when transplanted to an environment with a lower temperature average than that of their original growth site, and with seasonal temperature fluctuations which are smaller in the experimental site than in the control site. Temperature fluctuations at the control site were up to 2.5 times greater than at the experimental site for most of the observation months. This supports the conclusion that the parameters a) minimum temperature and b) temperature stability of the environment are essential for the incorporation of Mg into the carbonate skeleton matrix of marine organisms. Within this study the results of a quantitative chemical analysis of the carbonate skeleton of H. coerulea are presented and growth data of transplanted colonies compared with those from the control site.     

东海三定点周日海流观测的准调和分析

应用短期资料的潮流准调和分析方法，对东海三定点测站获得的表、中、底3层的25h连续海流资料进行了分析，计算了3测站O1，K1，M2，S2，M4，MS4 6个主要分潮的北、东分量潮流调和常数，并给出了各测站在各层的潮流椭圆要素。计算结果表明：该海区潮流属于正规半日潮流性质，半日分潮流的北分量大于东分量，呈现旋转流的性质，按顺时针向旋转。分析结果也反映出表层、中层的浅水分潮在观测海流中所占的份额高于底层的浅水分潮。结果有助于了解该海区的潮流性质并为潮流数值模拟提供校验实测数据。通过与同期获得的悬浮物浓度剖面数据的比对，将有助于研究潮流与该地区悬浮泥沙浓度分布之间的关系。     

A finite element model of interaction between viscous free surface waves and submerged cylinders

This paper describes the simulation of the flow of a viscous incompressible Newtonian liquid with a free surface. The Navier–Stokes equations are formulated using a streamline upwind Petrov–Galerkin scheme, and solved on a Q-tree-based finite element mesh that adapts to the moving free surface of the liquid. Special attention is given to fitting the mesh correctly to the free surface and solid wall boundaries. Fully non-linear free surface boundary conditions are implemented. Test cases include sloshing free surface motions in a rectangular tank and progressive waves over submerged cylinders.     

Modified mild slope equation and open boundary conditions

A numerical model to compute wave field is developed. It is based on the Berkhoff diffraction-refraction equation, in which an energy dissipation term is added, to take into account the breaking and the bottom friction phenomena. The energy dissipation function, by breaking and by bottom friction, is introduced in the Berkhoff equation to obtain a new equation of propagation.The resolution is done with the hybrid finite element method, where lagrangians elements are used.     

Stress and deformation of offshore piles under structural and wave loading

Various offshore structures, especially large structures such as Tension Leg Platforms (TLP), are usually supported by concrete piles as the foundation elements. The stress distribution within such a large structure is a dominant factor in the design procedure of an offshore pile. To provide a more accurate and effective design for offshore foundation systems under axial and lateral wave loads, a finite element model is employed herein to determine the stresses and displacements in a concrete pile under similar loading conditions. A parametric study is also performed to examine the effects of the stress distribution due to the changing loading conditions.     

Second-Order Wave Diffraction Around 3-D Bodies by A Time-Domain Method

A time-domain method is applied to simulate nonlinear wave diffraction around a surface piercing 3-D arbitrary body. The method involves the application of Taylor series expansions and the use of perturbation procedure to establish the corresponding boundary value problems with respect to a time-independent fluid domain. A boundary element method based on B-spline expansion is used to calculate the wave field at each time step, and the free surface boundary condition is satisfied to the second order of wave steepness by a numerical integration in time. An artificial damping layer is adopted on the free surface for the removal of wave reflection from the outer boundary. As an illustration, the method is used to compute the second-order wave forces and run-up on a surface-piercing circular cylinder. The present method is found to be accurate, computationally efficient, and numerically stable.     

Boussinesq-type modelling using an unstructured finite element technique

A model for solving the two-dimensional enhanced Boussinesq equations is presented. The model equations are discretised in space using an unstructured finite element technique. The standard Galerkin method with mixed interpolation is applied. The time discretisation is performed using an explicit three-step Taylor–Galerkin method. The model is extended to the surf and swash zone by inclusion of wave breaking and a moving boundary at the shoreline. Breaking is treated by an existing surface roller model, but a new procedure for the detection of the roller thickness is devised. The model is verified using four test cases and the results are compared with experimental data and results from an existing finite difference Boussinesq model.