模具型腔加工参数的优化问题

首先阐述了在CAD CAM集成环境下编制数控加工工艺的过程以及优化加工参数的必要性 ,接着 ,分析了需要优化的加工参数。文章详细阐述了优化模型的建立和算法设计问题     

铜基形状记忆合金马氏体相变宏观形状应变特征

利用X射线衍射仪、透射电镜、扫描电镜、原子力显微镜等研究了Cu-18Al-9Mn-3.4Zn(摩尔分数,%)形状记忆合金的马氏体晶体结构、亚结构以及马氏体相变宏观形状应变特征.结果表明:该合金的马氏体晶体结构为18R结构,亚结构为层错;单变体马氏体表面浮凸呈"( ) "型,浮凸高度为400～500nm,浮凸宽度为2 000～2 400 nm;多变体马氏体表面浮凸呈"N"型和"山尖"型,浮凸高度为200～400 nm,浮凸宽度为1 000～1 800nm;浮凸角均为8°～12°;马氏体相变符合G-T模型的双切变特征,惯习面为(113)面.     

DK7725A型电火花线切割机操作技巧及加工工艺分析

针对DK7725A型高速走丝线切割机床在加工特殊工件时存在的一些问题进行了分析,从工件的装夹,加工参数、加工速度的设置,操作规范的应用,以及降低断丝几率等加工技巧方面进行了详细的讨论,提出了相应的改进措施,从而有利于提高加工质量和加工的稳定性.     

水射流技术的应用研究

水射流是一项迅速崛起的新技术、新工艺,随着其参数(压力、流量、功率等)与喷射形式的不同,它可应用于许多方面.本文介绍了水射流在喷水推进、水雾灭火和射流切割、粉碎、表面清洗等方面的应用,并详细分析了其优点及应用机理.     

高速切削机床中的磁轴承

高效化是机械制造的永恒主题之一。本文简介了高速切削的理论依据及其优点，分析了磁悬浮轴承的原理、特点以及磁浮轴承在高速切削机床上的应用情况，从而说明了磁浮轴是高速切削机床最理想的轴承之一。     

滚切剪剪切力的实验研究

对直导向滚切剪的剪切力进行了实验研究，得到了计算最大剪切力的经验公式。     

Ti-23Al-17Nb合金激光切割工艺研究

对一种金属间化合物Ti-23Al-17Nb合金的激光切割性进行了初探。试验结果表明只要工艺参数适当，可获得较好质量的切口。切缝质量可以满足随后激光拼焊的要求。     

On the evaluation of the global heat transfer coefficient in cutting

The use of numerical simulations for investigating machining processes is remarkably increasing because of the simulation cost is lower than the experiments and the possibility to analyze local variables such as pressures, strains, and temperatures is allowable. Process simulation is very hard from a computational point of view, since it frequently requires remeshing phases and very small time steps. As a consequence, the simulated cutting time is usually of the order of few milliseconds and no steady cutting conditions are generally achieved, at least as far as thermal conditions are concerned. Therefore, nowadays numerical prediction of cutting temperatures cannot be considered fully reliable. In the paper this issue was taken into account: a mixed Lagrangian-Eulerian numerical approach was utilized and the global heat transfer (film) coefficient at the tool-chip interface was derived through an inverse approach. Finally, the dependence of the film coefficient on pressure and temperature on the rake face was investigated.     

A critical analysis on the friction modelling in orthogonal machining

Despite the development of high performance finite element-based codes, the simulation of machining still represents a very hard task due to the geometric complexity of the real chip-tool systems and the high cutting speed that requires very long simulation times. For these reasons, many aspects related to machining are not very clear and so easy to simulate. In this paper a rigorous investigation on the role played by the implemented friction model within a 2D simulation of orthogonal cutting was carried out, taking into account different models proposed by the researchers in the last years. The main simulation results were compared with experimental measurements in order to verify if it is possible to identify the best model. Once the comparison with mechanical variables was completed, a subsequent study on temperature predictions utilizing the above friction models was executed as well. The results of this integrated numerical and experimental work are carefully reported in the paper.     

金刚石颗粒在锯切石材过程中磨损形态的研究

本文分析和归纳了锯切花岗石过程中金刚石颗粒的五种磨损形态和三个磨损阶段，探讨了金铡石颗粒磨损形态对金刚石锯片锯切性能的影响。