快速纳秒响应二代近贴聚焦像增强器的批量生产

叙述了二代近贴聚焦像增强器批量生产所用真空设备性能及特点，同时给出了管子工艺考核结果及管子纳秒时间响应特性。工艺考核结果表明，制管工艺可靠、性能稳定，管子批量生产合格率大于70％。     

“锲而不舍 金石可镂”——上海秀派公司2．45GHz有源RFID标签技术的成功之路

上海秀派公司坚持自己的技术长项——2．45GHz有源RFID,充分发扬该种RFID的特长,记者采访该公司时了解到了开发方面的很多细节、成功案例和实施经验。我们不但非常推崇该公司的“锲而不舍”的意志,而且还意识到如果秀派公司的成功经验一旦辐射到中国的RFID行业中,一定会把这项在国外诞生的技术更好地植根于中国的土壤,使之更加适合中国的实用环境。     

Reconfigurable hardware implementation of a phase-correlation stereoalgorithm

This paper describes the implementation of a stereo-vision system using Field Programmable Gate Arrays (FPGAs). Reconfigurable hardware, including FPGAs, is an attractive platform for implementing vision algorithms due to its ability to exploit parallelism often found in these algorithms, and due to the speed with which applications can be developed as compared to hardware. The system outputs 8-bit, subpixel disparity estimates for 256× 360 pixel images at 30,fps. A local-weighted phase correlation algorithm for stereo disparity [Fleet, D. J.: {Int. Conf. Syst. Man Cybernetics 1:48–54 (1994)] is implemented. Despite the complexity of performing correlations on multiscale, multiorientation phase data, the system runs as much as 300 times faster in hardware than its software implementation. This paper describes the hardware platform used, the algorithm, and the issues encountered during its hardware implementation. Of particular interest is the implementation of multiscale, steerable filters, which are widely used in computer vision algorithms. Several trade-offs (reducing the number of filter orientations from three to two, using fixed-point computation, changing the location of one localized low-pass filter, and using L1 instead of L2 norms) were required to both fit the design into the available hardware and to achieve video-rate processing. Finally, results from the system are given both for synthetic data sets as well as several standard stereo-pair test images.     

Logistic模型的改进及在油藏可采储量预测中的应用

为了更准确地预测油气藏未来的经济可采储量，依据油气藏随开发必然要经历产量递减和生产收支平衡的实际。利用Logistic模型中技术可采储量、产量与时间的相互关系，经推导和改进后，再结合当前经济技术条件下的废弃产油量，预测油气藏的有效生产时间及其经济可呆储量。实践证实，改进后的Logistic模型预测结果更符合油气藏的生产实际，能为油气藏的储量管理提供可靠的依据。     

加油站油品损耗的管理问题分析及解决办法

针对加油站在油品进、销、存方面因管理和人为作弊而产生的损耗大问题，提出了解决办法：各环节交接手续要严密完备；发货方实施保量运输，选择信誉好的承运方；在销售、储存方面应加强管理，推行加油站计量员、账务员集中管理，主要账表电子表格化，及时上报主管部门，执行责任追究制并与效益工资挂钩。     

小流域氮流失特征及其影响因素

由非点源流失的氮是造成水体污染的主要因子之一，而土地利用方式往往对氮的流失产生重要影响。本课题在福建省九龙江流域遴选了4个不同土地利用方式的小流域，通过在自然降雨条件下现场采样与室内分析相结合，研究不同土地利用结构的小流域氮的流失特征和影响因素。研究结果表明：总氮、可溶态氮和泥沙结合态氮的浓度通常比径流先达到峰值，然后开始降低；氮的流失以可溶态氮为主(占73%～98.3％)，因此其流失量主要受径流量的影响与雨强关系不大；土地利用方式对氮的流失有明显影响，一般植被覆盖度提高可以降低流失，而农业活动会加剧流失；此外，在高植被覆盖度的天然林地，氮的流失呈现出以泥沙结合态为主。通过本研究可以看出土地利用结构的调整和合理布置是九龙江流域非点源污染控制的重点。     

Cs-K混合蒸气中Cs(8D)+K(4S)碰撞能量转移

在Cs-K混合蒸气中，两步激发Cs原子到8D态，观察了Cs(8D) K(4S)→Cs(5D) K(4P)碰撞能量合并逆过程(REP，reverse energy pooling)。应用双调制技术探测K(4P)原子发射的荧光，基态K原子密度用光学吸收方法测量。得到了REP速率系数，讨论了其它过程对速率系数的影响．     

一种用于三电平逆变器的SVPWM调制方法研究

本文从二极管箝位型三电平逆变器的基本结构出发，分析其输出状态，推导出六角形空间电压矢量图。然后从一种改进的，可以减小开关损耗，避免高的dv／dt三电平空间矢量PWM调制策略出发，建立了基于Matlab的详细仿真方案，验证了方案的可行性。文章给出了扇区判断的算法流程图，脉冲生成模块的内部结构图，其中的扇区判断的算法和脉冲生成方法对于用DSP实现三电平SVPWM具有重要的参考价值。     

Biases of Success Rate Differences Shown in Binomial Effect Size Displays.

The intent of a binomial effect size display (BESD) is to show "the [real-world] importance of [an] effect indexed by a correlation [r]" (R. Rosenthal, 1994, p. 242) by reexpressing this correlation as a success rate difference (SRD) (e.g., treatment group success rate - control group success rate). However, SRDs displayed in BESDs generally overestimate real-world SRDs implied by correlations of (a) dichotomous X and Y variables (φ coefficients), (b) dichotomous X and continuous Y variables (point-biserial coefficients [rphs]). and (c) continuous X and Y variables (rxys). Furthermore, overestimation biases are larger for rxys than for rphs. Differences in the sizes of biases linked to different correlations suggest that BESD SRDs reported for different correlations are not comparable. The stochastic difference index (N. Cliff, 1993: A. Vargha & H. D. Delaney, 2000) is recommended as an alternative to the BESD. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

减振器在自导系统结构设计中的应用

通过对减振器结构设计的理论分析，建立了减振器的数学模型，同时通过设计的模拟装置对减振效果进行了实测，效果良好。