CSP连铸机大型液压缸的故障分析与改进

论述引进德国SMS连铸机大包托臂液压缸存在的寿命短问题，分析设计制造缺陷．通过增大缸头密封支持面、(φ600)内圆孔倒角、再增加一道软支撑环、缸头导向部分开润滑槽、改进球杆的润滑流道、柱塞杆整体淬火等措施，消除了原来的问题．同时分析了此项改进的技术经济效果．     

地下连续墙在太钢老厂改造工程中的应用

结合某深基坑支护施工实例 ,介绍了采用多头潜水钻成槽机进行地下连续墙施工的基本原理、工艺流程及注意事项。指出该方案对于在老厂区改造工程狭窄场地条件下 ,解决深基坑施工保护附近建 (构 )筑物安全具有独特的优势     

Ensuring primary realization of pressure unit in the vacuum range without typically utilized static expansion system

After the break-up of Czechoslovakia in 1993 the primary metrological standards authority almost fully remained in Slovakia. So we had to build our primary vacuum metrology anew. But we could do it using uptodate techniques that are more effective and they enable us to fulfil our task more effectively and in a shorter time.The steady demand to widen the lower pressure range and a steady demand for maximal accuracy collide with the financial possibilities open to a small country. So it is impossible to follow the classical pattern for the vacuum standards: liquid columns, static expansion system and dynamic expansion system. But it is possible to utilize contemporary progress in construction of piston manometers. This enables us to discard liquid column and static expansion techniques in favour of piston technique [Tesar J, Prazak D. Vacuum 2002; 67: 311, Tesar J, Prazak D, Krajicek Z. In:Proceedings of international symposium on Pressure and Vacuum, 2003. p. 169, Tesar J, Repa P, Prazak D, Krajicek Z, Peksa L. Vacuum 2004; 76: 491.]. Such system fulfils all the needs of a little industrial country and is economically acceptable.     

碳酸化分解工艺的改进与实践

本文针对烧结法生产氧化铝过程中,铝酸钠溶液的碳酸化分解工艺,由间断分解到连续分解的改进进行了论述,指出连续分解是碳酸化分解的发展方向。     

两流薄板坯连铸连轧作业时铸坯在加热炉内的运行规律

讨论了两流薄板坯连铸连轧作业时铸坯在加热炉内的运动情况。分析了进入出坯段的铸坯的模式选择，进而确定铸坯进入平移段的时机。定义了加热炉综合进坯速度和加热炉平均出坯速度两个概念来讨论铸坯出坯的两种方案，并提出最小铸坯长度和最大加热炉综合进坯速度的计算公式。     

Switching between tasks of unequal familiarity: The role of stimulus-attribute and response-set selection.

It has been reported that it is harder to switch to a strong, well-practiced task from a weaker, less-practiced task than vice versa. Three experiments replicated this surprising asymmetry and investigated how it is affected by a reduction in interference between tasks. Experiment 1 progressively delayed the onset of the stimulus attribute associated with the stronger task. Experiments 2 and 3 separated the response sets of the tasks. Both manipulations reduced, without eliminating, interference of the stronger with the weaker task but reversed the asymmetry of switch costs, resulting in a larger cost of switching to the weaker task. The results are interpreted in terms of a model of the interactions between control input, task strength, and task priming. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Until的用法以及与其他词的辨析

通过例句讲解了until的用法,辨析了until与till、before的异同,并列举了高中英语和大学英语部分课文及习题中的例句。     

提高定制产品物料需求预测的准确性

提高定制产品物料需求预测准确性是提高企业竞争能力的必由之路。通过某公司提高定制产品物料需求预测准确性的具体项目实践，介绍了关于提高物料需求预测准确性的具体措施。通过建立一种能为各部门所共同接受的产品语言来加强各部门的信息交流，并减少从客户的实际需求到物料预测之间的中间环节来提高整个物料预测的准确性，并以实例验证其有效性。     

普通碳素钢在CSP连轧过程中的组织演变

在CSP机组上，通过普通碳素钢(Q235)的轧卡试验研究了该钢在连轧过程中的组织演变过程。结果表明：高温区的两道次大变形使原始铸造树枝晶通过再结晶基本实现了奥氏体的等轴化和组织的均匀化；进一步变形可继续细化原始奥氏体并最终获得晶粒尺寸约为30μm的、均匀的等轴晶组织。在CSP工艺中，原始奥氏体组织细化可能与精轧总压下量高、单道次变形量大、应变速率高及钢中出现异常析出物等因素有关。     

酚醛树脂复合板在热连轧机中的应用

重点分析了现有F7机架出口导卫装置的情况。原导卫材料是由铸钢制造 ,由于摩擦和高温常常引起热连轧带钢表面划伤 ,根据现场实际情况用酚醛树脂复合板替代铸钢导卫装置。实践表明 ,这种改造即可行又可靠 ,并取得了好的效果