钢结构设计及轻型钢结构应用

介绍了钢结构的适用范围、形式、布置要求以及进行结构分析的方法，探讨了结构软件的应用以及构件的优化选型，促进了钢结构在土木工程建筑中的广泛应用。     

The analysis of solvation in ionic liquids and organic solvents using the Abraham linear free energy relationship

The contentions made in an earlier paper [J Chem Technol Biotechnol 80 : 133–137 (2005)] that the coefficients of the Abraham solvation equation do not provide meaningful information on the molecular properties of ionic liquid solvents is refuted. The objections noted in the earlier paper disappear when the solvation equation model is correctly applied to the experimental data. It is further shown that the coefficients of the Abraham solvation equations can be used to characterize ionic liquids and can be used to select solvents for the solubility of gaseous solutes. Copyright © 2006 Society of Chemical Industry     

Collaborating freight forwarding enterprises

The paper presents a model for the collaboration among independent freight forwarding entities. In the modern highly competitive transportation branch freight forwarders reduce their fulfillment costs by exploiting different execution modes (self-fulfillment and subcontraction). For self-fulfillment they use their own vehicles to execute the requests and for subcontracting they forward the orders to external freight carriers. Further enhancement of competitiveness can be achieved if the freight forwarders cooperate in coalitions in order to balance their request portfolios. Participation in such a coalition gains additional profit for the entire coalition and for each participant, therefore reinforcing the market position of the partners. The integrated operational transport problem as well as existing collaboration approaches are introduced. The presented model for collaboration is based on theoretical foundations in the field of combinatorial auctions and operational research game theory. It is applicable for coalitions of freight forwarders, especially for the collaboration of Profit Centres within large freight forwarding companies. The proposed theoretical approach and the presented collaboration model are suitable for a coalition of freight forwarding companies with nearly similar potential on the market.     

宝浪油田气测变化规律及解释方法改进

新疆焉耆盆地博湖坳陷宝浪油田开发初期气测特征明显，但经过10年的开发，随着注水量增大，气测异常发生了很大变化，主要表现在C1相对含量呈上升趋势，而重烃组分与全烃的比值呈下降趋势。在这种情况下沿用原来的气测录井解释方法已很难准确划分油气水层。为此，提出了人工神经网络油气水层解释模型，阐述了模型特征参数的优化及确定方式、模型的产生过程和权系数的确定途径，经过反复训练与试验，实际输出与期望输出最大误差小于0．01。应用表明，采用人工神经网络油气水层解释模型更有利于准确评价油气水层，其解释符合率可达到86．7％。     

塔巴庙区块气层录井参数分析研究

塔巴庙区块气藏属于低压、低渗气藏,储集层物性差异大、含气级别高,但含气非均质性强,录井解释评价困难。针对这一问题,开展了综合判断储集层物性和含气性方面的研究,分别探讨了钻时与全烃、钻井液性能与全烃、钻井液粘度与全烃、气测显示与测井参数和烃组分与气显示之间的关系,分析了其相关性及其在塔巴庙区块气层解释评价中的意义及作用。通过相关性研究,不但摸索出定性解释评价气层的方法,同时为今后深入研究录井相关参数关系,探索其内在规律,为实现准确解释评价储集层奠定了基础。     

Stress analysis of pin-loaded woven-glass fiber reinforced epoxy laminate conveying chain components

The aim of this study is to examine the effects of various loading conditions on the stress of a pin-loaded woven-glass fiber reinforced epoxy laminate conveying chain component. A numerical and experimental study was carried out to determine the stress distribution of composite conveying chain components used to convey loads. For the experimental study, an apparatus was developed to simulate chain components in real motion. Two different working conditions of the chain component were investigated. The first condition represents the movement of the chain components without loading. In the second condition, the chain component touches and moves the load. The commercial finite element package ANSYS was used to perform the numerical analysis using a three dimensional eight-noded layered structural solid elements. Chain tensile forces were loaded through pins and chosen as 250, 500, 750, 1000 and 1250 N for the two conditions of chain components. Experimental and numerical studies were compared and discussed for two conditions and five different tensile forces. A good agreement between experimental results and numerical predictions is obtained.     

Development of calibration models for quality control in the production of ethylene/propylene copolymers by FTIR spectroscopy,multivariate statistical tools,and artificial neural networks

Principal component regression (PCR), partial least squares (PLS), StepWise ordinary least squares regression (OLS), and back‐propagation artificial neural network (BP‐ANN) are applied here for the determination of the propylene concentration of a set of 83 production samples of ethylene–propylene copolymers from their infrared spectra. The set of available samples was split into (a) a training set, for models calculation; (b) a test set, for selecting the correct number of latent variables in PCR and PLS and the end point of the training phase of BP‐ANN; (c) a production set, for evaluating the predictive ability of the models. The predictive ability of the models is thus evaluated by genuine predictions. The model obtained by StepWise OLS turned out to be the best one, both in fitting and prediction. The study of the breakdown number of samples to be included in the training set showed that at least 52 experiments are necessary to build a reliable and predictive calibration model. It can be concluded that FTIR spectroscopy and OLS can be properly employed for monitoring the synthesis or the final product of ethylene–propylene copolymers, by predicting the concentration of propylene directly along the process line. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Influence of third monomer on the crystal phase transition behavior of ethylene-tetrafluoroethylene copolymer

Crystal phase transition between the low- and high-temperature phases has been investigated for ethylene (E)-tetrafluoroethylene (TFE) alternating copolymer (ETFE) containing the third monomeric species by the temperature dependent measurements of wide-angle X-ray diffraction (WAXD) and small-angle X-ray scattering (SAXS) and differential scanning calorimetry. Nonafluoro-1-hexene (NFH) and hexafluoropropylene (HFP) were chosen as the third monomers, where they are different in the side-branch length, -(CF₂)₃CF₃ and -CF₃, respectively. In the case of E/TFE/NFH copolymer (ET-C4F9), the crystal phase transition temperature of the original ETFE two-components copolymer was not very much affected by the existence of NFH in the range of NFH content from 0.7 to 3 mol%. Contrarily, the crystal phase transition temperature of E/TFE/HFP copolymer (ET-CF3) was found to decrease drastically with increasing HFP content. The melting temperature and the higher-order structure were also affected sensitively depending on the HFP content. This difference in phase transition behavior between ET-C4F9 and ET-CF3 copolymers is reasonably interpreted as follows: the short side groups (-CF₃) of HFP monomeric unit are included in the crystal lattice of E/TFE chains and the unit cell is expanded gradually with an increment of the HFP content, resulting in the decrease in phase transition point because of easier thermal motion of the chains. On the other hand, the long side groups [-(CF₂)₃CF₃] of NFH monomeric units are excluded out of the crystal lattice and located on the lamellar surfaces or in the amorphous region and do not affect very much the phase transition temperature even when the NFH content is increased. In association with such a change in crystal structure, the long period of stacked lamellar structure was found to decrease remarkably in the case of NFH, whereas it does not change very much for HFP, consistent with the interpretation of the above-mentioned WAXD data.     

新型高温永磁体的研制

通过分析影响磁体高温性能的因素,设计了新磁体的成分为:Cu含量高,Fe含量低,Zr适量,Sm含量高;采用粉末冶金工艺制备了高温Sm_2(CoFeCuZr)_(17)永磁体。制得的磁体室温磁性能为:B_r1.075 T,H_(ei)2 098.2 kA/m,H_(eb) 776.1 kA/m,H_k843.8 kA/m,(BH)_(max)210.0 kj/m~3;在200℃时的磁性能为:B_r0.991 T,H_(ci)1 175.7 kA/m,H_(cb)531.7 kA/m,H_k577.9 kA/m,(BH)_(max)172.5 kJ/m~3;矫顽力温度系数β(20～200℃)为-0.24％/℃。经理论分析和实验验证,磁体的使用温度均超过400℃,为高温环境(高于400℃)提供了一种实用性永磁材料。