Thermodynamic Assessment of DyCl3-MCl （M= Na, K, Rb, Cs） Systems

Using the CALPHAD （Calculation of Phase Diagram） technique, the DyCl3-MCl （M = Na, K, Rb, Cs） systems were optimized and calculated. The modified quasi-chemical model in the pair approximation for short-range ordering was used to describe the Gibbs energies of the liquid phase in these systems. From the measured phase diagram data and experimental thermodynamic properties, a series of thermodynamic functions were optimized base on an interactive computer-assisted analysis. The optimized parameters and the experimental data were thermodynamically self-consistent. The optimized results were discussed.     

IT for niche companies: is an ERP system the solution?

Abstract.  Niche companies are per definition idiosyncratic. They survive in a competitive world by mastering a small market niche, providing what their customers need. This often requires a flexible organization, and the ability to customize products. To be more efficient, many of these companies rely on extensive use of IT, often by installing general Enterprise Resource Planning (ERP) systems. These systems have grown from isolated systems that handle planning based on incoming orders and the component structure of the various products, to systems with ambitions to embrace the total functioning of the company including vendor and customer relation management. In this paper, we present four case studies. One company is a part of a large enterprise, but performs niche functions within this enterprise. The other three are small- or medium-sized enterprises. Each of these performs in small niche markets. Common to all is the fact that they encounter problems with the utilization of their ERP systems. The major problem seems to be that the ERP system has an inherent business model that may not conform to the needs of the company. Without a good understanding of the underlying models and the constraints under which the fundamental algorithms operate, it is difficult to use these systems correctly. Even excellent systems may give bad results if they are applied to situations where they are not suited. Further, the monolithic structure of an ERP system, with a rather complicated parameter setting, is often insufficient to mould the system to the needs of a niche company. We discuss these problems based on our four case studies, and offer alternative approaches that may be considered.     

Energy and resources as production factors in process industries

It is shown that, when the mean productivity of some factors, such as energy or materials, is upperly bounded (a condition usually arising in energy production or in the process industries where energy takes part in physico-chemical processes), the production function may not be convex and, under some further conditions, is concave. Consequences of this model on the economics of energy savings are examined, and it is shown that energy savings may be considered at three levels: in the short run, by action on labour factors: in the medium run, by investment and action on labour factors; in the long run, by technological innovation, investment in new technologies and action on labour factors. Empirical findings along these lines are thus confirmed.     

Dependence of surface morphology of CVD diamond films on deposition conditions

ＤｅｐｅｎｄｅｎｃｅｏｆｓｕｒｆａｃｅｍｏｒｐｈｏｌｏｇｙｏｆＣＶＤｄｉａｍｏｎｄｆｉｌｍｓｏｎｄｅｐｏｓｉｔｉｏｎｃｏｎｄｉｔｉｏｎｓＹＡＮＧＧｕｏｗｅｉ（Ｄｅｐｔ．ｏｆＰｈｙｓ．，ＸｉａｎｇｔａｎＵｕｉｖｅｒｓｉｔｙ，Ｘｉａｎｇｔａｎ４１１１０５...     

电力滤波装置调谐,调试与测试方法的优化

本文通过对滤波器调谐、调试和测试实践中发现的问题，作了剖析．主要针对方法上的原因．作了具体的阐述，并通过对方法的优化，节省现场工作时间２０％，滤波装置的调试精确度也提高达１５％左右，取得的效果比效明显。     

KNOWLEDGE-BASED FEATURE DISCOVERY FOR EVALUATION FUNCTIONS

Since Samuel's work on checkers over thirty years ago, much effort has been devoted to learning evaluation functions. However, all such methods are sensitive to the feature set chosen to represent the examples. If the features do not capture aspects of the examples significant for problem solving, the learned evaluation function may be inaccurate or inconsistent. Typically, good feature sets are carefully handcrafted and a great deal of time and effort goes into refining and tuning them. This paper presents an automatic knowledge-based method for generating features for evaluation functions. The feature set is developed iteratively: features are generated, then evaluated, and this information is used to develop new features in turn. Both the contribution of a feature and its computational expense are considered in determining whether and how to develop it further.
This method has been applied to two problem-solving domains: the Othello board game and the domain of telecommunications network management. Empirical results show that the method is able to generate many known features and several novel features and to improve concept accuracy in both domains.     

一种基于遗传算法的模糊关联规则挖掘方法

文中提出了一种基于遗传算法的生成隶属度函数的方法,该方法通过遗传算法对初始种群进行优化,获得一个适应度较高的隶属度函数编码,然后再根据机场噪声数据的实际标准对优化后得到的隶属度函数进行修正,进而得到梯形分布的隶属度函数编码.最后通过得到的隶属度函数对数据进行模糊化,并采用FP-trees算法生成模糊关联规则.该文针对数量型属性提出了这种方法,它的优点是能够使通过遗传算法得到的较优的隶属度函数更加适用于实际的数据集.     

连续体结构的参数化水平集统一优化

针对传统分步式结构优化设计的不足,提出一种同时进行结构拓扑、形状和尺寸统一优化的设计方法.首先采用水平集函数描述统一的结构优化模型和几何尺寸边界,通过引入紧支径向插值基函数将结构拓扑优化变量、形状优化变量和尺寸优化变量变换为基函数的扩展系数;然后取该扩展系数为设计变量,借助一种参数的变化表达3种优化要素对结构性能的影响,将复杂的多变量优化问题变换为相对简单的参数优化问题,有利于与相对成熟的优化算法相结合提高求解效率;进一步用R函数将其融合为一个整体,构造出统一优化模型,并用最优化准则法进行求解.最后通过数值案例证明了该方法的有效性和精确性.     

基于改进麻雀搜索算法的服务功能链优化映射算法

为了实现5G网络场景下服务功能链的低成本高效率部署,提出了一种基于改进麻雀搜索算法的服务功能链优化映射算法。在服务功能链映射过程中,采用双层编码方式,将服务请求的组链方案和映射方案进行混合编码,然后使用改进离散麻雀搜索算法进行求解,得到该请求的服务功能链部署方案,并计算其映射权重。当同一时间片内存在多个请求类型时,按照映射权重对所有服务功能链进行排序,优先映射权重高的请求,以此减少延迟开销,提高节点计算资源利用率和链路资源利用率。仿真结果表明,该算法可以有效减少部署开销,提高资源利用率。     

基于西门子S7-300 PLC装卸机械自控系统设计

主要介绍了装卸机械控制系统的构成、系统在运行过程中的控制要求、以及如何实现机械自动操作的功能,利用S7-300PLC的功能模块化程序设计思想,设计出手动控制逻辑功能和自动控制逻辑功能及组织块程序,大大提高了工作效率和生产安全性。