液态金属静压力对缩孔缩松判据的影响

大多数缩孔缩松判据都忽略了液态金属静压力的影响,因此对液态金属静压力较大的铸件的缩孔缩松预测不够准确。针对这一问题,通过对铸件缩孔缩松判据———时间梯度法(Xue判据)的改进,将液态金属静压力P0引入到缩孔　>Ck,与实验缩松判据中,建立了时间梯度法与液态金属静压力之间的关系。新的缩孔缩松判据可表示为P0 80　·Gτ/τ0 6结果对比表明,预测结果与实验结果吻合,比原缩孔缩松判据预测结果更加准确。     

Filling and solidification of TiAl melt in centrifugal field

A model was established based on the combination of the equation of continuity, the equation of conservation of momentum and the equation of general energy to describe the filling and solidification of TiAl melt by permanent mold centrifugal casting. The model was solved numerically and the filling and solidification processes in the centrifugal field were discussed. The results indicate that the centrifugal field essentially influences the filling and solidification processes of TiAl melt. The melt will first fill the cavity along the back boundary until it reaches the end. After the end is fully filled, the whole cavity will be filled gradually by the way that free surface of the melt moves towards the entrance, hence the entrance is the last part to be filled. Furthermore, the mechanism by which internal defects can be formed in centrifugally cast TiAl components were interpreted.     

金属板料成形数值模拟的研究现状

本文对板料成形数值模拟的几个主要研究方向 :有限元算法、接触与摩擦、成形极限图、缺陷等的研究现状进行了介绍 ,并且讨论了板料成形数值模拟今后的研究方向     

The establishment of the statistical-thermodynamic model of D81-structure and its application to α-Nb5Si3

A statistical-thermodynamic model for binary nonstoichiometric A₅B₃ with D8₁-structure has been established on the basis of the grand canonical ensemble. In the model the average chemical potentials according to the composition and a new extra equation as a boundary condition are proposed for more accuracy and free experimental data calculations. The model can be used in any A₅B₃ type compounds with D8₁ structure. The establishment method of the statistical-thermodynamic model can be extended to other complicated structures. We apply the statistical-thermodynamic model to α-Nb₅Si₃ and the parameters used in the model are obtained from the first-principles' calculations. From these parameters the expression for the point defect concentrations as a function of compositions and temperatures is obtained by numeral calculations. The constitutional defects and thermal defects in α-Nb₅Si₃ are discussed.     

A demerit-fuzzy rating system,monitoring scheme and classification for manufacturing processes

For monitoring online manufacturing processes, the proportion of weights imposed on each type of product’s defects (nonconformities or demerits) has a profoundly effective impact on control charts’ performance. Apparently, the demerit-chart approach is superior than the widely-used c-chart scheme, because it allows us to place relative precise weights (real numbers) on defects according to their distinctly inferior degrees affecting the product quality so that the abnormal variations of processes can be literally exposed. However, in many applications, the seriousness of defects is evaluated partially or entirely by the inspectors’ perceptive judgement or knowledge, so with the precise-weight assignment, the demerit rating mechanism is considered to be somewhat constrained and subjective which inevitably leads to the targeted manufacturing process with limited and possibly biased information for online surveillance. To cope with the drawback, a demerit-fuzzy rating system and monitoring scheme is proposed in this paper. We first incorporate fuzzy weights (fuzzy numbers) to properly reflect the severity measures of defects which are categorized linguistically. Then, based on properties of fuzzy set theory and proposed approaches for fuzzy-number ranking, we develop the demerit-fuzzy charting scheme which is capable of discriminating process conditions into multi-intermittent statuses between in-control and out-of-control. This approach improves the traditional process control techniques with the binary-classification restraint for the process conditions. Finally, the proposed demerit-fuzzy rating system, monitoring scheme, and classification is elucidated by an application in garment industry to monitor textile-stitching nonconformities conditions.     

Stochastic defect diffusion model for relaxation effects in crystalline polyethylene

It is suggested that some relaxation processes observed in crystalline polyethylene are consequences of the diffusive motion of a particular defect called a point dislocation or twist dispiration loop along the polyethylene stems in lamellar crystals. The motion of the defect, characterized by a diffusion coefficient and a mobility, is described by solutions of the Smoluchowski diffusion equation with boundary conditions that constrain the defect to move along routes that produce experimentally observable results. The fact that passage of the defect causes both a 180° rotation of the chain and moves an extra CH₂ group in the direction of the chain axis is important to the interpretation of the data according to this model. The diffusion coefficient for a defect is estimated to be around 2 × 10^?9 cm² s^?1 at 70°C. This value is shown to be reasonable both from the viewpoint of detailed computer modelling of defect motion and contemporary ideas about scaling.     

调整高压系统工艺 参数弥补设计缺陷

针对尿素装置开车过程中高压系统出现的问题,分析产生的原因是设计缺陷造成汽提塔汽提效率不够,通过调整高压系统工艺参数,实现优化操作,达到系统最佳运行.     

Structural characteristics of oxide nanosphere supported metal nanoparticles

Structural characterization by transmission electron microscopy of metal nanoparticle coatings on oxide nanospheres has been employed to point out the potential of such materials for use as porous support model catalysts. On silica and titania nanospheres of various origins surface-mediated metal deposition at mild temperature conditions has been utilized to fabricate Pt, Pd, Ag, and Au nanoparticle coatings on the oxide supports. Promising coating characteristics have been achieved for Ag and Au nanoparticles by direct reduction on terminating hydroxyl-rich St?ber silica. A high-resolution electron microscopy analysis directed to surface stress, lattice contraction and planar lattice defects of the latter particles revealed no strong metal-support interaction.     

Review of Mechanically Related Failures of Ceramic Capacitors and Capacitor Materials

This paper reviews the brittle fracture behavior of dielectric ceramics such as barium titanate, and describes some of the relationships between defects such as cracks and electrical degradation and failure of multilayer capacitors. Stresses arising from the ferroelectric phase transformation in these dielectric materials are shown to play a part as a driving force for crack growth. In addition, possible contributions to failure from stresses arising from thermal excursions in the capacitor are discussed. Low-voltage failures arising from a short between the electrodes in multilayer capacitors are shown to be related to the growth of cracks in the dielectric. A technique for predicting the onset of these types of failures based upon fracture mechanics techniques is described. Possible effects of the electric field itself in promoting or retarding the growth of cracks are discussed.     

刚玉瓷指痕缺陷的研究

本文采用两种不同Al2O3粉为原料，结合Al2O3预烧与材料的生产工艺，对刚玉瓷的指痕缺陷及其对材料性能的影响进行了研究。结果发现：Al2O3粉预烧温度不匀时，部分颗粒（γ-Al2O3）周边存在层错缺陷，激活能的存在，人体中颗粒粘连（团聚）；该团聚体在坯体及烧结体中的残留直接引起烧结体中的结构缺陷，由Al2O3预烧温度高且均匀的粉体制备材料，才能获得具有优良性能的刚玉体。