榆树林油田砂岩储层敏感性研究

榆树林油田储层粘土矿物含量较高，各种注入条件和施工条件都会对该储层造成相应的伤害，应采取相应的防护措施，为防止速敏的发生，储层的注水速度应控制在临界流速（1.0mL/min）以下，在油井转注时，可先注入1.09PV的含粘土稳定剂的进行处理，以提高产量或注入量，注入阴离子表面活性剂配置的活性水再注入地层水，不能增加地层水的渗透率，该项试验研究对指导榆树林油田的开发具有重要的意义。     

精密角位移传感器及其可靠性研究

从理论上探讨了磁阻率效应，叙述了精密角位移传感器的工作原理及结构设计。传感器的分辨率已达０．０１°，通过可靠性寿命试验，传感器的失效率λ（ｔ）＜１×１０－７／ｈ。     

Dynamics of Solidification in 2% Corn Starch-Water Mixtures: Effect of Variations in Freezing Rate on Product Homogeneity

Directional solidification studies of gelatinized corn starch-water mixtures were undertaken in order to examine, in situ, the freezing behavior of this food model. The solidification rate was controlled by varying sample cell velocity as it moved from a 25°C hot stage to a -25°C cold stage. While freezing at cell velocities ≤7.5 μm/sec, starch granules were alternately pushed or entrapped by the advancing solid-liquid interface producing a segregated structure consisting of alternating high-starch and low-starch bands. At a cell velocity of 10 μm/sec, the frozen product was homogeneous. The relationship between the solid-liquid interface velocity and segregation behavior was quantified and compared to an existing model of particle-interface interactions.     

Diagnostics and monitoring of complex production processes using measurement of vibration-acoustic signals

A vibration-acoustic method for diagnostics and monitoring of production processes such as cutting metals makes it possible compared with other methods to reduce the requirement for measuring equipment and it provides a computer representation of the results observed. The set of equipment suggested has low cost and it exhibits considerable flexibility compared with existing equipment. __________ Translated from Izmeritel’naya Tekhnika, No. 7, pp. 30–34, July, 2006.     

Self-Organized Monitoring in Ad-Hoc Networks

We propose in this paper a self-organized monitoring architecture for mobile ad-hoc networks based on a selective scheme where subsets of nodes are managed. These nodes are determined based on their network behavior in order to favor subsets of well-connected nodes. The key idea is to relax the requirements of the management plane, and to use these manageable subsets to monitor the performance of the overall network. We therefore propose a new performance metric to be monitored, in order to estimate the capability of ad-hoc nodes to communicate end-to-end in the network. Extensive simulations show how different parameters affect this metric.     

Quasi-static and dynamic crushing behaviors of aluminum and steel tubes with a cutout

Tubular members are commonly used as an energy absorber in engineering structures and many such members have a cutout. In this study, the crushing behaviors of tubes with a cutout are characterized and the effects of cutout on the energy absorption capabilities of these tubes are quantified. Systematic parametric studies were carried out to study the effect of material properties, including yield and ultimate strength of material, strain rate effect, location of cutout, tube length and impact speed on the crushing behaviors and energy absorption capacity of aluminum and steel tubes. First, a numerical model was constructed with a commercial explicit finite element code. It will be first proven that the numerical simulation can produce sufficiently accurate results in an economic manner. Subsequently, the crushing behavior of aluminum and steel tubes with a cutout was experimentally characterized and their energy absorption capacity was evaluated in terms of mean crushing force, peak crushing force and specific energy absorption (SEA). Tubes of various lengths with a cutout located at different locations, subject to both quasi-static and dynamic impact loadings were considered. For steel tubes, the numerical simulation investigated the influence of the strain rate effect and variation in strain hardening ratio of the material. Empirical equations describing the mean and peak crushing forces of aluminum and steel tubes with a cutout were developed using linear and nonlinear regression methods applied to the results obtained from the numerical and experimental studies.     

On-demand Virtual Neonatal Intensive Care units supporting rural, remote and urban healthcare with Bush Babies Broadband

Premature and ill term babies born in regional Australia must be moved to another hospital with Neonatal Intensive Care Unit (NICU) facilities. Transferred pre-term and critically ill term babies have higher mortality rates and much higher rates of long term disability than similar babies born in hospitals with NICU facilities. This paper details the Bush Babies Broadband project that aims to significantly improve the quality of treatment for babies born in rural, remote as well as urban areas by providing the first on-demand virtual NICU architecture in Australia. Real-time data collected from medical monitors and ventilators attached to the baby, audiovisual streams and static physiological data such as X-ray images are transmitted to the consulting Neonatologist to gain a better picture of the patient's condition than is currently available. The key contribution of this significant research is the infrastructure providing a mechanism for Neonatologists to receive information directly from a regional hospital, thereby preventing, in some cases, the immediate need to move the baby. A key benefit of this framework is that it is available to link regional hospitals with the supporting NICU Neonatologist ‘on demand’ eliminating the need to establish permanent point to point connections. This paper further describes the application of that architecture to a specific pilot connecting the Bathurst regional hospital with Neonatologists within the NICU at Nepean Hospital, Penrith Australia.     

Strength of Metals at High Strain Rates

Results of metal testing in impact tension–compression and indentation are analyzed. As the analysis of these data demonstrates, the strength of metals increases greatly with strain rates and at moderate indentation rates. At high indentation rates, a decrease in the specific energy (per unit volume of a displaced material) necessary for the formation of a conical cavity was observed. The account of the effects of viscosity, temperature increase upon plastic deformation and its localization can be used to explain the above phenomena.     

农业重组微生物生物安全研究进展

综述了近年来农业重组微生物的研究现状和进展 ,详细介绍农业重组微生物环境释放的监控方法以及对环境的冲击作用 ,对一些有关生物安全研究的热点问题进行了探讨