高海拔地区500kV线路绝缘配合设计中导线绝缘子片数的选择

文章主要根据高海拔地区线路经过的污秽等级,通过泄漏比距计算出了工频电压条件下所要求的绝缘子片数,并进行海拔修正,然后根据操作过电压及雷电过电压对该绝缘子片数进行复核,最终确定导线绝缘子片数.     

小湾水电站大坝仓面保温措施效果分析

为了掌握收仓面覆盖EPE保温材料保温的真实效果,特在同一仓同面内做保温试验,试验结果说明覆盖保温材料与没有覆盖保温材料的混凝土仓面温度没有太大变化,证明效果不明显,混凝土仓面是否可不覆盖保温材料正在进一步试验中论证中,如通过试验论证取消该措施,对提高收仓面质量、加快施工进度、节约施工成本等都大有好处.     

基于多源融合的油纸绝缘套管缺陷辨识及绝缘状态评估

油浸纸绝缘套管作为变压器的关键组件,其绝缘受损会威胁变压器主设备的运行安全。针对此现状,提出一种基于多源融合的油纸绝缘套管缺陷辨识及绝缘状态评估方法。首先,根据实际运行工况制备典型缺陷试验套管,并开展频域介电响应、局部放电及红外热成像联合试验,辨识套管缺陷种类。然后,提取套管绝缘指标量,引入隶属度函数及状态得分算子,建立基于博弈论组合赋权法的套管绝缘状态评估模型。最后,分别采用组合赋权法和单一赋权法的评估模型,对正常以及缺陷套管进行算例分析。结果表明：联合试验可以准确辨识套管缺陷种类。组合赋权法弥补了单一赋权法评估结果片面的不足,且正常套管的模型评估分数均高于缺陷套管。评估结果与套管实际绝缘状态一致,验证了套管绝缘状态评估模型的正确性及有效性。     

Optical Design of Silica Aerogels for On-Demand Thermal Management

Silica aerogels, a type of porous material featuring extra low density and thermal conductivity, have drawn increasing interest from both academia and industry owing to their excellent thermal insulation performance. However, thermal insulation is always the single consideration when silica aerogels are used for thermal management. In this study, the on-demand thermal management (ODTM) of silica aerogel with either passive thermal insulation, passive heating, or passive cooling in different environments is revealed. The ODTM behavior of silica aerogels can be simply fulfilled through their optical property variations such as solar light transparency and infrared emissivity, which are controllable via the microstructures of the building blocks and surface composition design. Robust solar heating of 25 °C higher than the ambient in the daytime and sub-ambient cooling of 7 °C at night is achieved with the traditional transparent silica aerogel. Interestingly, sub-ambient cooling of 5 °C in the daytime and a warmer state on cold nights is achieved by modifying its solar transmittance and infrared emissivity. This study guides a comprehensive understanding of the thermal management behavior of silica aerogels and leads to ODTM applications of silica aerogels by tailoring their optical and thermal conductivity properties.     

Thermally Responsive Fibers for Versatile Thermoactivated Protective Fabrics

Smart textiles with good mechanical adaptability play an important role in personal protection, health monitoring, and aerospace applications. However, most of the reported thermally responsive polymers has long response time and poor processability, comfort, and wearability. Skin-core structures of thermally responsive fibers with multiple commercial fiber cores and temperature-responsive hydrogel skins are designed and fabricated, which exhibit rapid mechanical adaptability, good thermohardening, and thermal insulation. This universal method enables tight bonding between various commercial fiber cores and hydrogel skins via specific covalently anchored networks. At room temperature, prepared fibers show softness, flexibility, and skin compatibility similar to those of ordinary fibers. As temperature rises, smart fibers become hard, rigid, and self-supporting. The modulus of hydrogel skin increases from 304% to 30883%, showing good mechanoadaptability and impact resistance owing to the synergy between hydrophobic interactions and ionic bonding. Moreover, this synergistic effect leads to an increase in heat absorption, and fibers exhibit good thermal insulation, which reduces the contact temperature of the body surface by ≈25 °C under the external temperature of 95 °C, effectively preventing thermal burns. Notably, the active mechanoadaptability of these smart fibers using conductive fibers as cores is demonstrated. This study provides feasibility for fabricating environmentally adaptive intelligent textiles.     

电压互感器手车复合绝缘失效及电场分布的研究北大核心CSCD

复合绝缘是空气绝缘开关设备小型化设计的一种重要绝缘方式。复合绝缘结构的PT(电压互感器)柜运行情况表明,该类型产品的绝缘故障率较高,特别是在湿度和污秽联合影响下,因绝缘结构设计不当的产品很容易产生局部放电,进而引发相间短路。究其原因,绝缘隔板是相间短路的"桥梁"。文中对一起24 kV PT手车三相短路事故原因进行了详细分析,通过电场仿真结果可以看出:在复合绝缘结构中,高压对绝缘板之间的距离是复合绝缘结构设计的关键。文中的故障分析以及电场分析为新产品开发与故障诊断提供了有益的参考。     

冷绝高温超导电缆绝缘层设计研究

通过对冷绝缘高温超导电缆绝缘层的设计、评测及研制工艺过程分析,总结了绝缘失效的原因及研制工艺的缺陷,提出绝缘层研制工艺优化改进的措施及操作方法,可为冷绝缘高温超导电缆的研究提供一定的参考。     

一种新型低温容器综合性能检测仪设计及应用

针对低温容器性能检测实际需求,介绍了一种新型低温容器综合性能检测仪的设计计算方法及工艺流程,并从抽真空系统、测量分析系统、环境监测系统、控制系统及工艺流程方面重点阐述其设计方法,最后介绍了基于此设计完成的产品及实际应用情况。     

液氮温区固-液复合绝缘气体小桥对沿面放电的影响

采用IEC脉冲电流法(IEC60270标准)对液氮温区超导复合绝缘沿面放电现象及其影响因素进行了研究。在六面屏蔽的局部放电实验室内,研究了不同放电条件对放电起始电压、放电量、击穿电压等的影响,进而研究了其作用机理,并用有限元方法开展了相关计算。实验数据表明,不同放电条件明显影响放电重复率、平均放电量、最大放电量等,放电产生的气泡越容易逸出,放电越严重;液氮的流动使放电起始电压有一定的升高,但对最终击穿电压影响不大;在放电通道上施加阻挡之后可明显提高最终的闪络击穿电压。     

新型多腔孔陶瓷复合保温材料的制备及性能研究

通过原料及配方的创新,以硅酸铝纤维、玻化微珠等为原料制备了一种新型多腔孔陶瓷复合保温材料。研究了材料的导热性能和显微结构。结果表明:材料导热系数低,热面温度200℃时导热系数仅为0.050 W/(m·K),热面温度600℃时导热系数为0.084 W/(m·K);材料内部结构疏松,存在多级配的孔隙结构,孔隙尺寸在微米级以下。利用马弗炉进行保温性能测试,保温材料内表面温度600℃,厚度仅为139mm时,稳态时外表面温度即可低于46℃,散热损失仅为158 W/m~2,远远低于标准规定的最大散热损失266 W/m~2。将材料制成1cm厚度的块材时,材料能产生较大弯曲而不损坏,有利于对电厂高温管道进行包覆。