话音ATM交换的实现─—ATM论坛电路仿真系列建议

近年来，随着ATM主干网络的建设和发展，研究ATM对现有通信业务的支持方式和适配技术是目前ATM技术研究的热点之一。话音ATM交换在降低话音通信成本和简化网络操作环境等方面提供了大量的技术手段，并且支持在单一网络环境中的多种综合业务传输。ATM论坛制定了电路仿真系列建议，话音ATM交换的技术已经基本成熟。文章通过对话音ATM交换在实现和优化方面的技术进行分析，并提出一种基于NativeModeATM的话音通信方式。     

甲烷和乙烷共同转化制乙烯的研究

甲烷和乙烷可以同时在Ｗ－Ｍｎ／ＳｉＯ２催化剂上得到活化生成乙烯。原料乙烷和甲烷体积比在０．１１～０．２５的范围内，当甲烷转化率为２０％左右时，共进料反应产物中乙烯体积浓度为８％～１２％，达到炼油厂催化裂化干气中乙烯的浓度。     

布喇格光纤光栅反射特性及制作的理论研究

在对光纤光栅折射率分布进行合理假设的基础上,运用耦合模理论计算了光纤光栅的反射特性,对其反射特性与相关参数的关系进行了分析,并且还推导出了用相位掩模法制造光纤光栅的理论根据,得到了一些有益于光纤光栅制造的结论和有用公式。     

1.30μmDFB激光器组件的设计和制做及其工作原理

本文自行设计和制作了１．３０μｍＤＦＢ激光器组件的讨论了光隔离和光耦合原理。由于采用的激光器－光隔离器－光纤的一体化结构，大大增加了该组件的可用性。在实验中得到高达５５％的耦合效率。     

A Novel Method Of Transport Barrier Formation

A novel technique is proposed for creating transport barriers by the rf waves. This is that the transport barriers can be created by the rf induced ponderomotive force itself and no rf induced flow shear generation is necessary. It is demonstrated that the ponderomotive force of the rf waves can stabilize the ion temperature gradient (ITG) mode, considered nowadays as the dominant source of anomalous energy losses in the low confinement (L) mode. It is also shown that this stabilization can be achieved for rather modest values of the rf power and hence should be easily obtained in actual experiments.      

Decisive arrival law parameters and a general finite capacity queueing problem

This paper addresses the problem of finding the parameters of the arrival law which most significantly influence expected occupation and loss of a finite capacity queue. The input process is supposed to be ergodic and wide sense stationary. We show that it is mostly possible to fit an MMPP(2) to the decisive parameters of observational data. Numerical examples illustrate the importance of the decisive parameters, called key parameters, and also show the accuracy of the proposed fitting procedure. Finally, in the appendix we present the solution of the finite capacity queueing problem with Special Semi Markov Process (SSMP) arrivals and a general service strategy.     

偶联剂对玻璃纤维/环氧基复合材料界面介电性能的影响研究

本文研究了五种偶联剂对玻璃纤维浸润性能和玻璃纤维/环氧基复合材料界面介电性能的影响。结果表明,玻璃纤维经偶联剂处理后,其浸润活化能降低,与环氧树脂基体间的相容性及化学反应活性得到改善;因此赋予了玻璃纤维与环氧基体间以良好的界面粘结性能,从而提高了玻璃纤维/环氧基复合材料界面的介电性能。其提高的幅度大小与偶联剂的极性及化学结构有关。     

HIN2xxE系列RS-232收发器的原理及应用

HIN2xxE系列是由＋5V单电源供电的高速RS-232收发电路，符合EIARS-232C和V．28规范，以电源功耗低为显著特点，广泛应用于ISDN和高速调制解调器，尤其是电池供电系统中。文中主要介绍HIN2xxE系列电路的原理、特性和典型应用。     

Testing the robustness of CIECAM02

CIE TC8‐01 has adopted a new color appearance model: CIECAM02¹ replaces the CIECAM97s.² The new model consists of a number of refinements and simplifications of the CIECAM97s color appearance model. This article describes further tests to the robustness of the forward and reverse modes. © 2005 Wiley Periodicals, Inc. Col Res Appl, 30, 99–106, 2005; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.20087