Rich photoluminescence emission of SnO2–SiO2 composite aerogels prepared with a co-fed precursor sol–gel process

Tin oxide–silica composite aerogels were successfully prepared with a co-fed precursor sol–gel process. The crystallinity of the tin oxide nanoparticles, embedded in the mesoporous SiO₂ network, was improved with increasing the post-reaction thermal treatment temperature. The composite aerogels exhibited a rich photoluminescence (PL) emission contributed by both SnO₂ and SiO₂. The PL peak of 346 nm was from the near band edge emission of the tin oxide nanoparticles, and the ones located at 310 and 476 nm were attributable to the oxygen deficiencies of the silica network. Three more emission peaks, 387, 432, and 522 nm, were observed, with the 387 nm peak contributed by the oxygen vacancies V_O⁺⁺, the 432 nm peak by the Sn interstitials, and the 522 nm peak by the oxygen vacancies V_O⁺, respectively, of the tin oxide nanoparticles. The intensities of these three defect level emissions were found decreased, as compared to that of the near band edge emission, with increasing the post-reaction thermal treatment temperature as the tin oxide crystallinity improved.     

旅大10-1油田化学驱物理模拟研究

旅大10-1油田位于渤海辽东湾中部海域,油藏具有高温、高矿化度和胶结疏松等特点。从海上油田开发实际需求出发,结合油藏地质特征和流体性质特点,利用室内物理模拟实验方法,研究了早期注聚合物和聚合物微凝胶的驱油效果。结果表明,早期化学驱不仅大大缩短油田开发周期、节约操作费用,而且最终采收率也高于中后期化学驱的采收率。结果还表明,在化学药剂费用相同条件下,聚合物凝胶驱的增油效果要好于普通聚合物驱。     

Application d'une méthodologie expérimentale à l'étude du diagramme ternaire d'un gel

Nous avons montré sur l'exemple d'un gel, mélange de trois constituants (C12–C15 Alcohols Benzoate, Cyclomethicone et Ethylene Vinyl Acetate Copolymer) qu'il est possible d'optimiser une formulation en un nombre preécis d'essais en faisant appel à une stratégic expérimentale optimale. Le gel avait déjàétéétudié par Chang,¹ mais par approches successives.
Nous avons utlisé les matrices d'expériences développées dans le cas des mélanges par Scheffe sous le nom de 'reseaux-simplex'. Prévoyant des intéractions de 2éme ordre entre les constituants nous avons retenu le modéle appelé'cubique réduit'. Cette approche permet l'exploration systémique de tout le domaine.
Les réponses étudiées sont la compatibilité (gel homogène ou non), la consistance, la blancheur et le coût. Le meilleur gel étant celui qui se rapproche le plus de la vaseline.
A partir des résultats, nous avons tracé des courbes d'isoréponse en blancheur, consistance et coût. La superposition des diagrammes conduit à la détermination d'une zone où les réponses sont optimales.
En ajoutant la réponse supplémentaire: 'facilité d'étalement sur la peau'on arrive au meilleur gel avec un nombre réduit d'essais.
La même méthode s'appliquerait à des mélanges de plus de trois constituants.
Study of a ternary diagram gel according to a methodology of experimental research     

Restoration of the red colour of photo-bleached carthamine in calcium-alginate gel membranes

The restoration of the red colour of carthamine (photo-bleached in polymeric heterosaccharide gels) was investigated using sodium salts, potassium salts, and alkali. Ca-alginate gel was stained with carthamine, and the red-dish membranes were exposed to fluorescent light for 2·5, 4·0 and 20 h (at 28°C). The resulting orange-yellow gel membranes were treated with Na- or K-citrate solution and the restoration of the red colouration was followed spectrophoto-metrically. The results indicate that the red colour of carthamine can be retained within the gel membranes, while yellow-coloured compounds were removed and/or transformed by the alkaline salt solutions.     

Sunflower Head Residue Pectin Extraction as Affected by Physical Conditions

Effects of extraction pH, temperature, and time on yield and quality of pectin from sunflower heads (Interstate cultivar) were investigated. The low-methoxyl pectin was extracted, using 0.75% sodium hexametaphosphate at pH 3, 4, and 5 and at 75, 85, and 95°for 20, 40, and 60 min, respectively. Yield, molecular mass, and firmness of jellies of the pectins were determined. Three-way statistical analysis on yield, molecular mass and gel firmness showed strong interactions among pH, temperature and time. Highest yields were obtained at pH 5, 95°for 20 min and pH 4, 85°for 40 min. Pectin extracted for 40 min at pH 3 and 4 and at 85°and 75°C, respectively, had the highest molecular mass. Gel firmness of sunflower pectin prepared at pH 5.4 was higher than that of a commercial citrus pectin.     

Photoelectrochemical properties of sol–gel-derived Ti1−xVxO2 solid solution film photoelectrodes

Ti_1−xV_xO₂ solid solution film photoelectrodes were prepared by the dip-coating sol–gel method. X-ray diffraction and X-ray photoelectron spectroscopy were employed to ensure the formation of the solid solution and their composition. Obvious photoresponses were observed in the visible region for the solid solution film electrodes with x0.05 and the red shift of the photoresponse was enhanced with increasing x. Moreover, the solid solution film electrodes were found to be photoelectrochemically stable. However, the onset potential of photocurrent shifted positively with increasing x. Band model of the solid solution was suggested to explain the effects of the vanadium incorporation on the photoelectrochemical properties.     

Nanocrystalline orthoferrite powders: Synthesis and magnetic properties

Nanocrystalline orthoferrite powders were synthesised at low temperatures by employing an aqueous sol–gel process. Colloidal sols and water re-dispersible gels of orthoferrite precursors were prepared by room-temperature processing of inexpensive metal salts. The average diameter (Z_av) of the precursor particles was in the size range from 4 to 7 nm; the diameters had a narrow size distribution. Water re-dispersible translucent gel monoliths were obtained by concentrating the aqueous sols followed by drying them under reduced pressure (10⁻² Torr) at room temperature. The sol–gel transition was found to be completely reversible. Nanocrystalline fine powders of orthoferrites of general formula, LnFeO₃ (Ln = La, Sm, Gd, Dy, Er, Yb and Y) having a crystallite size of about 25 nm were prepared by heating the gel precursors at 650–700 °C in air. Powder X-ray diffraction and thermogravimetry, respectively, were employed to identify perovskite phase formation and delineate thermal events that lead to gel to crystallite conversion. Magnetic measurements were carried out on the resultant powders at room temperature and down to 40 K. Nanocrystalline orthoferrite powders exhibited weak ferromagnetic behaviour, and reduced magnetic moments.     

Preparation and properties of silicone‐containing poly(methyl methacrylate) gels

Poly(methyl methacrylate) (PMMA) gels with varying amounts of silicone and solvent and constant amounts of crosslinker were prepared by solution free radical crosslinking copolymerization of methyl methacrylate (MMA), ethylene glycol dimethacrylate (EGDM), tetraethoxysilane (TEOS) and vinyltriethoxysilane (VTES) comonomer systems. They were then studied in benzene at a total monomer concentration of 3.5 mol L^?1 and 70 °C. The conversion of monomer, volume swelling ratio, weight fraction and gel point were measured as a function of the reaction time, silicone concentration and benzene content up to the onset of macrogelation. Structural characteristics of the gels were examined by using equilibrium swelling in benzene, gel fraction and Fourier‐transform infrared (FTIR) analysis. The morphology of the copolymers was also investigated by SEM. Based on the obtained results, it was concluded that the FTIR data did not have the capacity to show the presence of the VTES or TEOS moiety in these kinds of copolymers. On the other hand, the variation of weight fraction of gel, W_g, and its equilibrium volume swelling ratio in benzene, q_v, exhibited the same behaviour as that of MMA/EGDM copolymers. Also, the dilution of the monomer mixture resulted in an increase in the gel point and swelling degree and a decrease in the percent of conversion and gel fraction. Finally, TEOS is not an ideal silicone compound for reaction in the MMA/EGDM copolymerization system, whereas VTES is a suitable silicone comonomer for this system and it has been proved useful. Copyright © 2005 Society of Chemical Industry     

可动凝胶深部调驱候选井筛选方法研究

根据可动凝胶深部调驱机理,结合注水井和对应油井的静、动态特征,筛选出了用于确定最佳调驱井的指标体系,并采用变权的模糊综合评判方法进行多因素定量评价。结果表明,用渗透率非均质性、吸水剖面非均质性、吸水强度、井口压降曲线、含水-采出程度对应关系、油水井连通程度、油层未动用程度及沉积相特征等指标来筛选调驱注入井可提高选井的可靠性,保证可动凝胶深部调驱的效果。     

凝胶过滤色谱测定高分子量聚乙烯醇分子量和分子量分布

用凝胶过滤色谱对高分子量聚乙烯醇分子量、分子量分布进行剖析。采用Plaquagel-OH色谱柱,0.25mol/LNaNO3,0.01mol/L Na2HPO4-NaH2PO,pH=7的缓冲溶液流动相,流速1ml/min,示差折光检测器,柱温30℃,聚环氧乙烷作标准物。该方法能显著缩短分析时间,提高准确性,可用于对高聚合度聚乙烯醇进行研究和指导生产。