Inhibitors of the Hepatitis C Virus Polymerase; Mode of Action and Resistance

The hepatitis C virus (HCV) is a pandemic human pathogen posing a substantial health and economic burden in both developing and developed countries. Controlling the spread of HCV through behavioural prevention strategies has met with limited success and vaccine development remains slow. The development of antiviral therapeutic agents has also been challenging, primarily due to the lack of efficient cell culture and animal models for all HCV genotypes, as well as the large genetic diversity between HCV strains. On the other hand, the use of interferon-α-based treatments in combination with the guanosine analogue, ribavirin, achieved limited success, and widespread use of these therapies has been hampered by prevalent side effects. For more than a decade, the HCV RNA-dependent RNA polymerase (RdRp) has been targeted for antiviral development. Direct acting antivirals (DAA) have been identified which bind to one of at least six RdRp inhibitor-binding sites, and are now becoming a mainstay of highly effective and well tolerated antiviral treatment for HCV infection. Here we review the different classes of RdRp inhibitors and their mode of action against HCV. Furthermore, the mechanism of antiviral resistance to each class is described, including naturally occurring resistance-associated variants (RAVs) in different viral strains and genotypes. Finally, we review the impact of these RAVs on treatment outcomes with the newly developed regimens.     

Sensory evoked potentials in patients with Rett syndrome through the lens of animal studies: Systematic review

ObjectiveSystematically review the abnormalities in event related potential (ERP) recorded in Rett Syndrome (RTT) patients and animals in search of translational biomarkers of deficits related to the particular neurophysiological processes of known genetic origin (MECP2 mutations).MethodsPubmed, ISI Web of Knowledge and BIORXIV were searched for the relevant articles according to PRISMA standards.ResultsERP components are generally delayed across all sensory modalities both in RTT patients and its animal model, while findings on ERPs amplitude strongly depend on stimulus properties and presentation rate. Studies on RTT animal models uncovered the abnormalities in the excitatory and inhibitory transmission as critical mechanisms underlying the ERPs changes, but showed that even similar ERP alterations in auditory and visual domains have a diverse neural basis. A range of novel approaches has been developed in animal studies bringing along the meaningful neurophysiological interpretation of ERP measures in RTT patients.ConclusionsWhile there is a clear evidence for sensory ERPs abnormalities in RTT, to further advance the field there is a need in a large-scale ERP studies with the functionally-relevant experimental paradigms.SignificanceThe review provides insights into domain-specific neural basis of the ERP abnormalities and promotes clinical application of the ERP measures as the non-invasive functional biomarkers of RTT pathophysiology.     

Quality of life after single-incision laparoscopic cholecystectomy: A randomized,clinical trial

Background

Controversy continues as to whether single-incision laparoscopic cholecystectomy, with the somewhat larger incision at the umbilicus, may lead to a worse postoperative quality of life and more pain compared with the more classic 4-port laparoscopic cholecystectomy. The aim of this study was to compare single-incision and 4-port laparoscopic cholecystectomy from the perspective of quality of life.

补骨脂素抗增生性瘢痕作用机制研究

目的探讨补骨脂素抗增生性瘢痕的作用机制。方法体外培养成纤维细胞,按随机数字表法分为正常组(培养正常成纤维细胞)、瘢痕组(培养增生性瘢痕成纤维细胞)、TGF-β1组(10 ng/ml TGF-β1处理增生性瘢痕成纤维细胞5 min^12 h)、Smurf2 RNA干扰组[Smad泛素化调节因子2(Smad ubiquitin regulatory factor2,Smurf2)siRNA转染增生性瘢痕成纤维细胞72 h]、补骨脂素组(10μmol/L补骨脂素处理增生性瘢痕成纤维细胞继续培养72 h)、补骨脂素+TGF-β1组(增生性瘢痕成纤维细胞加入补骨脂素培养72 h后加入TGF-β1培养6 h)。采用Western blot法检测Smurf2、α-平滑肌肌动蛋白(α-actin SMA,α-SMA)蛋白表达;RT-PCR法检测Ⅰ型胶原蛋白mRNA表达;ELISA法检测TGF-β1蛋白分泌。结果与正常组比较,瘢痕组Smurf2蛋白[(0.83±0.08)比(0.38±0.07)]表达增加(P<0.05);与瘢痕组比较,Smurf2 RNA干扰组TGF-β1[(2.2±0.18)比(4.2±0.47)]表达降低(P<0.05);TGF-β1组Smurf2[(0.71±0.06)比(0.42±0.04)]、α-SMA[(1.42±0.12)比(0.91±0.09)]蛋白表达增加(P<0.05),Ⅰ型胶原蛋白mRNA[(0.72±0.09)比(0.41±0.07)]表达增加(P<0.05);补骨脂素组Smurf2[(0.05±0.01)比(0.42±0.04)]、α-SMA[(0.71±0.07)比(0.91±0.09)]蛋白表达降低(P<0.05),Ⅰ型胶原蛋白mRNA表达[(0.12±0.04)比(0.41±0.07)]降低(P<0.05)。结论补骨脂素可能通过TGF-β1/Smurf2信号通路抑制α-SMA蛋白表达,从而降低Ⅰ型胶原蛋白表达,起到抑制瘢痕形成的作用。     

Caution! Overestimation of treatment effects of corticosteroid therapy for community-acquired pneumonia in a meta-analysis of randomized controlled trials

It is well known that a meta-analysis of randomized controlled trials aims to increase the power and precision of the estimated intervention effects. However, when a meta-analysis includes a limited number of patients and a small number of events, overestimation of intervention effect estimates may occur and could cause spurious results. Although many biases can cause the overestimation, random error may be the most common cause. Trial sequential analysis (TSA) can explore the independent effect of random error on intervention effect estimates in meta-analyses and protect meta-analyses against overestimation due to random error.     

Human epididymis protein 4 (HE4) levels inversely correlate with lung function improvement (delta FEV1) in cystic fibrosis patients receiving ivacaftor treatment

Background

We have recently shown that human epididymis protein 4 (HE4) levels correlate with the severity of cystic fibrosis (CF) lung disease. However, there are no data on how HE4 levels alter in patients receiving CFTR modulating therapy.

Current status and challenges of Additive manufacturing in orthopaedics: An overview

Additive manufacturing is a rapidly emerging technology which is being successfully implemented in the various field of medicine as well as in orthopaedics, where it has applications in reducing cartilage defects and treatments of bones. The technology helps through systematic collection of information about the shape of the "defects" and precise fabrication of complex 3D constructs such as cartilage, heart valve, trachea, myocardial bone tissue and blood vessels. In this paper, a large number of the relevant research papers on the additive manufacturing and its application in medical specifically orthopaedics are identified through Scopus had been studied using Bibliometric analysis and application analysis is undertaken. The bibliometric analysis shows that there is an increasing trend in the research reports on additive manufacturing applications in the field of orthopaedics. Discussions are on using technological advancement like scanning techniques and various challenges of the orthopaedic being met by additive manufacturing technology. For patient-specific orthopaedic applications, these techniques incorporate clinical practice and use for effective planning. 3D printed models printed by this technology are accepted for orthopaedic surgery such as revision of lumbar discectomy, pelvic surgery and large scapular osteochondroma. The applications of additive manufacturing in orthopaedics will experience a rapid translation in future. An orthopaedic surgeon can convert need/idea into a reality by using computer-aided design (CAD) software, analysis software to facilitate the manufacturing. Thus, AM provides a comprehensive opportunity to manufacture orthopaedic implantable medical devices.