10MW高温气冷实验堆(HTR-10)燃耗测量系统控制方案的改进

基于10MW高温气冷实验堆(HTR-10)的FCA系统及CFC系统的设计原理及运行规程,在不改变FCA系统原有设备部件的前提下,对FCA系统运行逻辑关系进行了优化,改进了原燃耗测量程序,实现了燃耗测量过程的自动运行及测量结果的自动建库.在此基础上,设计了CFC系统与FCA系统PLC的通信协议,实现了燃耗测量流程与控制系统的实时数据通信.上述改进的结果使得燃料装卸流程不再需要另设运行班组,提高了效率,将人为操作的步骤最少化,降低了误操作的可能性.     

压电量测系统漏电影响分析

本文通过对压电量测系统等效电路图的逐步简化,得出矩形脉冲信号的漏电方程;并对系统在各种情况下的时间常数,漏电相对误差进行了计算,最后就系统在校准和现场测试中经常碰到的几种情况,进行了定量估算,从而解决了压电量测系统在使用中的一些具体问题。     

Variation de la plombemie en fonction de la contamination par le plomb de l'eau livree a la consommation: Variation of the blood lead level as a result of lead contamination of the subjects drinking water

The combination of the chemical aggressivity of water and lead piping, as is well known, can cause severe cases of lead poisoning in those who consume such water. After a great number of observations and epidemiological studies which have strongly incriminated this metal in a wide range of pathologic conditions, other materials have been gradually substituted for lead; however, the problem remains.In compliance with a European Directive to survey the risk of lead poisoning (Council Directive, 1977), a random sample of 321 residents was selected from the Vosgian Mountains of France. This region is noted for its high incidence of cases of lead poisoning: 150 reported during 8 months in 1983 (Barbier et al., 1983).During the course of a health evaluation, a blood sample was taken from each subject for lead analysis. At the same time, a sample of tap-water (after running for 5 s) was taken from each subject home. Both lead analyses (blood and water) were performed by electrothermal atomization-atomic absorption spectrophotometry. Because of the log-normality of the distributions of the blood lead levels and the concentrations of lead in the drinking water, a logarithmic transformation was performed so that the results are expressed as the geometric mean, which for the amount of lead in the drinking water of our sample was found to be 0.16 mg l^?1.Among the subjects of this study, 28% are served by water containing more than 0.10 mg l^?1 of lead (the standard for France) and 48% by water containing more than 0.05 mg l^?1 (the European and WHO standard). In concurrence with numerous authors, our study indicates that, among our subjects, the blood lead level is much higher in men than in women (geometric means 22.9 and 15.0 μg dl^?1 respectively); this difference is highly significant (t-test:P < 0.001). Table 1 summarizes the results, by sex, obtained in this region compared with those from a study (Huel, 1982) concerning an urban French population whose geometric mean blood lead levels were 15.9 μg dl^?1 for men and 11.4 μg dl^?1 for women. The irrespective of sex, is highly significant (P < 0.001). Table 2 shows the significance of the relation between these subjects, high blood lead levels and the concentration of lead in their drinking water, while Fig. 1 shows that for contamination levels up to 0.02 mg l^?1 of lead in water, the blood lead level remains relatively stable, while above this apparent “threshold” value, the blood lead level begins to increase finally reaching quite high values in response to high contamination levels, suggesting a direct translation of increases in the water above the 0.02 mg l^?1 level to increases in the blood.     

红外背景干扰研究

根据从许多地区收集来的录象磁带上的图象数据和大量红外图象数据，对红外背景图象内的干扰进行了研究。图象内的噪声是以象元电平为单位的均方根形成计算。图象经过空间滤波处理，对其内的干扰再进行计算。为获得关于红外背景图象的空间频率构成的信息，在滤波和非滤波两种状态下计算了图象的光谱密度，把计算出的干扰值输入数据库取出多组数据并绘图，确定参数量（如天气、背景类型和测量条件等）对干扰电平的影响。     

试论双点后方交会简便公式

根据双点后方交会的图形特点和已知条件，列出了方程组，推导出了双点后方交会直接计算座标的简便公式，同时求出了精度计算公式，以供测量人员参考     

铸铁热分析用试样新型激冷剂的实验研究

从冷却曲线上相变段倾角最小原则出发，研究了新型激冷剂的配比与热分析法检测铸铁成分精度的关系，实验结果表明，能使相变段倾角最小的成分配比，也能提高对铸铁成分的热分析和检测精度。     

用迁移率和载流子浓度研究碲镉汞中的深能级

获得了一种研究碲镉汞深能级的方法。通过分析迁移率 载子浓度与温度的关系，可以得到关于深能级的重要依据。     

实行全面质量管理 做好江口水电站工程设计

江口水电站是芙蓉江干流开发中的骨干工程。为认真履行江口工程的设计合同，确保优质、高效地完成江口工程的各项设计工作，长江委设计院实行全面质量管理，建立了一套规范化的统计管理程序，制订详细的设计计划，落实江口工程项目各级责任人的质量责任制，采取特殊技术措施，对工程设计过程中的各项质量活动进行全过程的管理，使江口工程在满足质量标准、合同进度的情况下，工程投资最省。     

基于遗传算法的门限自回归模型在浅层地下水位预测中的应用

提出了建立门限自回归模型的一种简便通用的方法，用遗传算法可同时优化门限值和自回归系数．实例计算的结果说明了其可行性和有效性．该方法在各种工程时序预测中具有广泛的应用价值     

大曲率表面物体形貌的光学检测方法研究

本文提出了两种用于曲面形貌检测的傅里叶变换法中的频域低通滤波器，并与常用的窗口法低通滤波器进行了比较，给出了实际测量的结果。这两种频域低通滤波器（高幂次指数滤波器和矩形余弦滤波器）有可方便调整且平直的通带，平直无旁瓣的阻带，较陡的边带将通带与阻带间圆滑过渡连接，从而可尽可能多地保留有用频率成分，很好地滤掉直流和不用的高频分量，且较好地抑制振铃现象，克服一般窗口法设计的低通滤波器中旁瓣的影响。具有使用简单、参数调整方便、应用范围广等特点，尤其是对具有大梯度表面和棱角细节的物体检测更有独到之处，具有广泛的应用前景。