基于改进控制器的异步电动机直接转矩控制

通过分析转矩变化规律,研究不同电压矢量对转矩的变化所产生的影响,提出了改进的磁链和转矩的双层滞环方案。解决了传统直接转矩控制存在的低速转矩波动大的问题,方案简单、易于实现。仿真结果表明,采用该方案,能在不降低系统动态性能的情况下拓展系统的低速运行范围,降低转矩波动,提高电机的低速转矩。     

高压电动机定子线圈匝间绝缘问题的探讨

在实践经验的基础上，分析了我国匝间绝缘短路的主要原因，提出在匝间绝缘的设计，制造工艺及耐压试验等工序采取合理措施，以提高匝间绝缘的可靠性。     

浅谈变频器供电条件下电动机的温升与对策

随着变频调速技术的蓬勃发展，变频器供电电机的温升问题已引起人们的广泛关注。本文首先讨论了电动机的温升限度；然后结合感应电机温升实验的相关数据分析了变频器供电对电动机温升的影响及其原因；最后从降低发热量和提高散热能力两方面提出缓解电机温升的措施，并指出了实际应用中应注意的问题。     

轧机主传动电机励磁控制分析

在技术资料短缺的情况下，结合实际经验，绘制出进口轧机主传动电机励磁控制电路图，并进行了较为详细的分析。     

Application of ultrasonic waves in activation of microcrystalline cellulose

In this work, microcrystalline cellulose (MCC) was activated with ultrasonic waves. The influences of ultrasonic treatment on the changes of supramolecular structures and morphology structure were studied by WAXS and SEM. The accessibility of the MCC was characterized by water retention value (WRV) and specific surficial area. The influence of ultrasonic treatment on the reactivity of MCC was investigated through the reaction of MCC being oxidized into 2,3‐diadehyde cellulose (DAC) by periodate sodium. The mechanism of the reactivity change of ultrasonically treated MCC was examined. The results showed that the degree of crystallinity of MCC decreased and the degree of polymerization showed little change after treatment with ultrasonic waves. The morphologial variation of the treated MCC was significant when compared with the untreated MCC, which contribute to the improvement of accessibility. The aldehyde content of DAC prepared from ultrasonically treated MCC was improved from 64.19 to 85.00%, indicating that the regioselective oxidation reactivity of MCC was significantly improved. The aldehyde content was found to first increase with time of ultrasonic treatment to a point, and then decrease as time progressed. In addition, the aldehyde content was found to increase with an increase in ultrasonic power. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

粘接结构超声信号的小波分解与特征提取

粘接结构因其独特的物理、机械和声学特性在诸多领域具有非常广泛的应用，对于铝合金-橡胶这样一种金属-非金属粘接结构的超声检测信号，本文利用了小波变换的多分辨率分析(时频分析)的方法，有效地提取出了反映多层材料粘接状况的信号特征，该特征提取方法可用在粘接结构的无损检测中。     

原料磨同步机励磁装置的改造

分析原料磨同步机所使用的KGLF型励磁装置在实际运行中存在的问题，介绍采用LZK-3型微机励磁装置的改造实践。     

聚脲基脂及其在电机轴承上的应用

对电机轴承专用聚脲基脂的特点及其在电机轴承上的应用效果进行了分析和探讨。正确使用电机用润滑脂是保证电机正常工作，减少电机故障的关键措施之一。采用电机专用聚脲基脂后，电机轴承工作温度明显下降，电机故障率明显减少。     

连铸转炉钢包电力牵引车的研制

论述研制连铸转炉钢包牵引车的目的、意义、方案的选择及设计计算校核,对技术要点作出了明确阐述.     

劈刀和肋环夹持工况对超声键合换能系统电学特性的影响

通过实验分析了肋环夹持松紧度和劈刀存在两个因素对超声键合换能系统电学导纳特性的影响规律。对换能系统在悬挂有无劈刀和夹持8个松紧度等各个情况下进行谐振频率附近的导纳圆测量,确定换能系统等效电路各特征参数的变化情况。由实验结果的分析可知,劈刀的附加质量以及肋环松紧程度对换能系统谐振频率的影响不大,但劈刀的存在改变了换能系统的能量分布和耗散,是影响换能系统各特征参量的主要因素之一。这些结论有助于超声键合换能系统的优化。