A low cost calibration conditioner for dynamic strain gauge measurements

A conditioner for dynamic strain measurements that allows for a series of calibration signals with periodic and predefined time occurrence, during the whole period in which the measurements have to be carried out, is presented in this work. The calibration signals, having suitable size ratios between them, allow one to evaluate the linearity of the entire measurement chain.     

材质对蜂窝纸板缓冲性能的影响

对两种不同材质的蜂窝纸板静态应力应变性能和动态缓冲结果进行了比较分析。讨论了蜂窝纸板力学性能对应变速度的敏感性及两种纸板的缓冲性能差异。缓冲试验结果表明。在不同的冲击应变率下蜂窝纸板的材质影响蜂窝纸板缓冲性能。     

基于数字图像分析的薄板成形应变场测量方法

对薄板成形应变场传统的测量方法进行了研究。指出了其不足和误差的来源，提出了数字图像分析法测量薄板成形中的应变场，对测量原理，新的测量方法对传统方法的改进，以及如何降低误差进行了介绍，指出数字图像分析法的前景，提出了改进意见。     

A physically based method for triangulated surface flattening

This paper introduces a new method of generating 2D flat patterns from a 3D triangulated surface by opening the bending configuration of each winged triangle pair. The flattening can be divided into four steps. First, a 3D triangulated surface is modeled with a mass-spring system that simulates the surface deformation during the flattening. Second, an unwrapping force field is built to drive the mass-spring system to a developable configuration through the numerical integration. Third, a velocity redistribution procedure is initiated to average velocity variances among the particles. Finally, the mass-spring system is forced to collide with a plane, and the final 2D pattern is generated after all the winged triangle pairs are spread onto the colliding plane. To retain the size and area of the original 3D surface, a strain control mechanism is introduced to keep the springs from over-elongation or over-shrinkage at each time step.     

固溶体补强增韧的机理

本文主要对无机非金属材料晶体因固溶外来离子而对晶体强度和韧性的贡献进行阐述。本文从固溶类型、点阵畸变、畸变应力着手进行讨论。     

疲劳与蠕变复合作用下PS的应变与寿命

对PS在疲劳/蠕变复合作用下应变与寿命进行了研究。结果表明：其疲劳/蠕变曲线与纯蠕变曲线十分相似。加载时间周期越短和疲劳载荷变化越频繁。结束普弹应变阶段应变越小，进入延迟弹性变形的平台应变阶段越早。在疲劳/蠕变复合作用下聚苯乙烯存在疲劳和蠕变的交互损伤，其断裂寿命比纯疲劳或纯蠕变的断裂寿命低。断裂寿命减小，疲劳/蠕变的交互损伤程度与温度密切相关，PS在较低温度的疲劳/蠕变交互损伤作用大于较高温度的交互损伤作用。随温度升高，疲劳/蠕变断裂寿命下降是疲劳和蠕变各自的单独损伤增加所致。     

Cement-based materials for stress sensing by dielectric measurement

The self-sensing of stress by measurement of the relative dielectric constant (κ) has been shown in cement pastes containing steel fibers of 8 μm diameter and carbon filaments of 0.1 μm diameter. The κ value increases nonlinearly and quite reversibly with compressive stress up to 6.4 MPa, although the reversibility is not complete. Inferior sensing performance was observed in cement paste with carbon fibers of 15 μm diameter, although the performance was still better than cement paste without admixture.     

波节式换热管压缩失稳试验研究

通过对不同材料、直径和壁厚的波节式换热管进行压缩失稳试验,绘出应力和应变强度关系曲线,指出直光管经胀管成型为波节管后,应力状态分布明显不同于光管,壁厚和直径等规格尺寸的不同会影响波纹管的强度性能.     

玻纤增强聚脂弯管应变导纳试验研究及其动应力分析

探讨了测定玻纤增强聚脂弯管应变导纳的试验方法。给出了力通道和应变通道的标定曲线。确定了玻纤聚脂弯管的第一、第二阶模态频率和阻尼比以及单位力幅下的动应变值。借助应变导纳的幅频特性和相频特性分析了弯管动应力。还用静态试验验证了动态测试的正确性     

全尺寸结构试验应变数据线性化修正方法研究

针对全尺寸飞机结构静力/疲劳试验中的应变测量数据非线性化的问题,进行应变测量数据线性化修正方法研究,提出一种适用于全尺寸飞机结构静力/疲劳试验应变测量数据线性化修正方法并进行工程应用。结果表明,该方法明显提高应变测量数据的准确性,是可行和有效的。该方法为后续海量应变数据自动化处理软件的开发提供理论依据。