空调表冷器性能微机测试系统设计与软件开发

介绍了一套用于空调表冷器性能测试的试验装置及配套软件，重点叙述了系统的总体构成、程序的设计思想以及数据采样和处理等功能模块。微机测试技术以及配套软件的使用大大减少了测试人员的工作量，并在一定程度上提高了测试的精度。     

The thermodynamic performance of a new solution cycle in double absorption heat transformer using water/lithium bromide as the working fluids

In this paper, a new solution cycle in the double absorption heat transformer is presented and the thermodynamic performance of this new cycle is simulated based on the thermodynamic properties of aqueous solution of lithium bromide. The results show that this new cycle is superior to the cycle being studied by some researchers. This new solution cycle has a wider range of operation in which the system maintains the high value of COP and has larger temperature lifts and operation stability. The relationship between the absorber and the absorbing evaporator is more independent and this makes the operation and control of the system more easier.     

天然气管道燃压机组的性能试验及见证

结合西气东输管道工程燃气轮机驱动压缩机组设备订货及验收中对性能试验项目的确定、工厂试验及见证过程,介绍了燃压机组性能试验项目所涉及的主要内容、执行标准、需要达到的技术指标,各种性能试验的基本情况,买方参加工厂试验见证中需要重点处理好的问题等。以期为我国其他大型长输天然气管道机组订货及试验见证工作提供借鉴。     

Optimum thermoeconomic and thermodynamic performance characteristics of an irreversible three-heat-source heat pump

The coefficient of performance and specific heating load of an irreversible three-heat-source heat pump are given by using a general cycle model affected by the finite-rate heat transfer, heat leak and internal irreversibility of the cyclic working fluid. The heat pumping load divided by the total cost per unit time is taken as a new objective function and used to investigate the performance of the heat pump. The thermoeconomic and thermodynamic performance characteristics of the heat pump are discussed in detail. Some important performance parameters such as the thermoeconomic objective function and coefficient of performance are optimized. The optimally operating regions of the heat pump and the bounds of several performance parameters are determined. Finally, it is pointed out that the Carnot heat pump may be taken as a special case of a three-heat-source heat pump and consequently its optimal performance can be directly derived from the results obtained here.     

Effects of circumferential pick spacing on boom type roadheader cutting head performance

Effects of equal and unequal circumferential pick spacing on the performance of boom type roadheaders having cylindrical cutting heads are investigated. For this purpose, two experimental cutting heads with equal and unequal circumferential spacing are designed and manufactured. The cutting head with unequal circumferential spacing is specifically designed to prevent tool-holder overlap at the nose section. Manufacturing difficulties associated with equal circumferential pick spacing due to tool-holder overlap are discussed with solid modeling and practical applications. The heads are tested at Park Cayirhan Coal Mine in Turkey and their cutting performances are analysed. Although better cutting performance for equal circumferential spacing are predicted by force–balance analysis, in situ measurements of instantaneous (net) traversing speed and cutting rate, pick consumption rate and machine vibration show that no significant difference exists between the performances of the two cutting heads.     

Evaluate the performance of a stochastic-flow network with cost attribute in terms of minimal cuts

This paper proposes a performance index to measure the quality level of a stochastic-flow network in which each node has a designated capacity, which will have different lower levels due to various partial and complete failures. The performance index is the probability that the maximum flow of the network equals the demand d without exceeding the budget b. A simple algorithm in terms of minimal cuts is first proposed to generate all upper boundary points for (d, b), and then the probability that the maximum flow is less than or equal to d can be calculated in terms of such points. The upper boundary point for (d, b) is a maximal vector representing the capacity of each arc such that the maximum flow of the network under the budget b is d. The performance index can be calculated by repeating the proposed algorithm to obtain all upper boundary point for (d−1, b). A benchmark example is shown to illustrate the solution procedure.     

欢喜岭重交通道路沥青SHRP性能研究

应用Superpave沥青胶结料试验动态剪切试验、压力老化试验和弯曲梁流变试验评定欢喜岭重交通道路沥青的抗永久变形、抗低温开裂和抗疲劳开裂性能，确定欢喜岭重交沥青最高和最低路面设计温度及PG等级，表明欢喜岭重交沥青满足我国广阔地域的使用要求。     

Network and device-level impacts: performance and reliability of active I/O storage systems

Distributed active storage architectures are designed to offload user-level processing to the peripheral from the host servers. In this paper, we report preliminary investigation on performance and fault recovery designs, as impacted by emerging storage interconnect protocols and state-of-the-art storage devices. Empirical results obtained using validated device-level and interconnect data demonstrate the significance of the said parameters on the overall system performance and reliability.     

Numerical characterization of a microscale solid-oxide fuel cell

In this study, a single unit of planar micro-solid-oxide fuel cell (μSOFC) is investigated numerically to evaluate the influences of flow channel design, oxygen composition, and thermal operating conditions on cell performance. Four flow channel designs are examined under the co-flow configuration: serpentine, double serpentine, rod bundle, and oblique rib. For all designs, the contacts areas of interconnect to electrodes are kept consistent to maintain the ohmic losses at the same level. To characterize the mass transport effects, there are three different compositions, 100% O₂, 50% O₂/50% N₂ and air, fed to the cathode inlet. Different thermal conditions, adiabatic and isothermal, are applied to the outer boundary of the μSOFC and the results are compared. The outcomes suggest that both thermal conditions and oxidant composition show remarkable influences on μSOFC performance. Under adiabatic conditions, the rise of cell temperature causes a decrease in reversible voltage, deteriorating the overall cell competence. When oxygen is diluted with nitrogen, local gas diffusion becomes dominant to the cathode reaction. Bulk flow, on the other hand, plays a minor role in cell performance since there is little deviation in the polarization curves for all flow channel designs, even at high current densities. For comparison, the flow visualization technique is employed to observe the transport phenomena in various flow channel designs. The flow patterns are found to resemble the concentration distribution, providing a useful tool to design μSOFCs.     

电信网络管理的望族——TMOS

电信管理及运营支撑是爱立信公司为公用电信网提供的有关管理及运营支撑功能的综合方案，本文介绍了其中的公网管理系统和蜂窝移动网络管理系统。