关于随机集值映象的不动点定理

我们得到几个随机集值映象的不动点定理，它推广了Ｍ．Ｓ．Ｋｈａｍ的结果［５］，文中所使用的方法与其它作者不同     

钻削中产生迷切现象的机理研究

随着科学技术的发展．对孔加工精度的要求越来越高．钻削过程中的速切现象对孔加工的形状精度、位置精度有很大的影响．本文用试验、观察、解析的方法分析了钻头迷切现象与各种因素的关系，对提高孔加工精度有了新的揭示．     

基于JavaScript实现随机数的分组抽取

通过一个随机数的分组抽取小实例,对JavaScript脚本语言做了简要说明,对初学者入门深有裨益。     

一种新的SAR图像斜距多普勒定位模型的直接解法

斜距多普勒定位模型是实现SAR图像无控制点定位的基本模型,因此如何高效准确地获得RD方程组的解成为实现SAR图像无控制点几何定位的根本问题,也是实现SAR自动图像定位的关键。首先利用地固坐标系下目标速度为零的特性,简化RD模型并整理为一元四次方程,然后利用一元四次方程求根方法,推导出斜距多普勒定位模型的明确数学解析解,并与常用的数值迭代求解方法进行比较分析,仿真结果验证了推导的正确性。新解法具有无需设置初始值,易于编程实现,鲁棒性高的特点。     

Selection of optimized features for fusion of palm print and finger knuckle‐based person authentication

The impact of digital technology in biometrics is much more efficient at interpreting data than humans, which results in completely replacement of manual identification procedures in forensic science. Because the single modality‐based biometric frameworks limit performance in terms of accuracy and anti‐spoofing capabilities due to the presence of low quality data, therefore, information fusion of more than one biometric characteristic in pursuit of high recognition results can be beneficial. In this article, we present a multimodal biometric system based on information fusion of palm print and finger knuckle traits, which are least associated to any criminal investigation as evidence yet. The proposed multimodal biometric system might be useful to identify the suspects in case of physical beating or kidnapping and establish supportive scientific evidences, when no fingerprint or face information is present in photographs. The first step in our work is data preprocessing, in which region of interest of palm and finger knuckle images have been extracted. To minimize nonuniform illumination effects, we first normalize the detected circular palm or finger knuckle and then apply line ordinal pattern (LOP)‐based encoding scheme for texture enrichment. The nondecimated quaternion wavelet provides denser feature representation at multiple scales and orientations when extracted over proposed LOP encoding and increases the discrimination power of line and ridge features. To best of our knowledge, this first attempt is a combination of backtracking search algorithm and 2D²LDA has been employed to select the dominant palm and knuckle features for classification. The classifiers output for two modalities are combined at unsupervised rank level fusion rule through Borda count method, which shows an increase in performance in terms of recognition and verification, that is, 100% (correct recognition rate), 0.26% (equal error rate), 3.52 (discriminative index), and 1,262 m (speed).     

矿井主通风机不停风倒机控制系统改进方案

针对矿井主通风机不停风倒机控制系统中工控机使用一定年限后容易死机的问题,提出将传感器连接到交换机上,并采用多台工控机同时读取数据的解决方法。针对温度巡检仪及电参数采集模块输出的RS485信号无法直接接入交换机的问题,提出增加串口服务器和增加PLC的RS485模块两种改进方案;分析了两种方案的优缺点,并最终选择增加PLC的RS485模块的方案。实际应用表明,系统改进后运行良好,达到了预期的效果。     

Water table fluctuation with a random initial condition

The nonlinear Boussinesq equation is used to understand water table fluctuations in various ditch drainage problems. An approximate solution of this equation with a random initial condition and deterministic boundary conditions, recharge rate and aquifer parameters has been developed to predict a transient water table in a ditch-drainage system. The effects of uncertainty in the initial condition on the water table are illustrated with the help of a synthetic example. These results would find applications in ditch-drainage design.Notation A / tanh t - a lower value of the random variable representing the initial water table height at the mid point - a+b Upper value of the random variable representing the initial water table height at the midpoint - B tanh t - C 4/ - h variable water table height - h mean of the variable water table height - h _m variable water table height at the mid point - h _m mean of the variable water table height at the mid point - K hydraulic conductivity - L half spacing between the ditches - m ₀ initial water table height at the mid point - N Uniform rate of recharge - S specific yield - t time of observation - x distance measured from the ditch boundary - (4/SL)(NK)^1/2 - (L/4)(N/K)^1/2 - dummy integral variable     

磁性纤维随机混合媒质等效电磁参数的计算

为计及强散射偶极子间的相互作用,引入参量εh和μh,利用广义多重散射理论及MATLAB计算机软件对在2 GHz～18 GHz频率下的体积占空比为8%的铁纤维随机混合媒质等效磁导率的实验值进行曲线的拟合,导出了耦合系数εh和μh,并在此基础上,对体积占空比分别为30%和20%的铁纤维随机混合媒质等效磁导率进行了计算,计算结果与实验吻合良好.     

Synthesis of tertiary poly(amido-amine)s with amido- and amino-groups randomly arranged along the macromolecular chain

A new synthesis of poly(amido-amine)s from bis (secondary amine)s and acryloyl chloride has been studied, leading to polymers in which the amido- and amino-groups are randomly arranged along the macromolecular chain. A poly(amido-amine) based on piperazine, chosen as the mother compound, has been fully characterized by ¹³C n.m.r. as well as by identification and quantitative evaluation of its hydrolysis products.     

Event-driven,pattern-based methodology for cost-effective development of standardized personal health devices

Experiences applying standards in personal health devices (PHDs) show an inherent trade-off between interoperability and costs (in terms of processing load and development time). Therefore, reducing hardware and software costs as well as time-to-market is crucial for standards adoption. The ISO/IEEE11073 PHD family of standards (also referred to as X73PHD) provides interoperable communication between PHDs and aggregators. Nevertheless, the responsibility of achieving inexpensive implementations of X73PHD in limited resource microcontrollers falls directly on the developer. Hence, the authors previously presented a methodology based on patterns to implement X73-compliant PHDs into devices with low-voltage low-power constraints. That version was based on multitasking, which required additional features and resources. This paper therefore presents an event-driven evolution of the patterns-based methodology for cost-effective development of standardized PHDs. The results of comparing between the two versions showed that the mean values of decrease in memory consumption and cycles of latency are 11.59% and 45.95%, respectively. In addition, several enhancements in terms of cost-effectiveness and development time can be derived from the new version of the methodology. Therefore, the new approach could help in producing cost-effective X73-compliant PHDs, which in turn could foster the adoption of standards.