Computational modelling of water flow inside laboratory Knelson concentrator bowl

Enhanced gravity concentrators such as Knelson concentrator (KC) are extensively used in the mineral processing industry. The complexities of KC bowl geometry and variation of feed characteristics have forced process engineers to design empirically new units using laboratory and pilot-scale Knelson concentrators. However, numerical modelling methods such as computational fluid dynamics (CFD) and discrete element method (DEM) provide a better insight of flow behaviour of fluid and particulate solid phases inside these processing units. This article reports findings of CFD simulations for single-phase water flow inside the laboratory KC. An available standard 7.5-cm laboratory KC bowl was numerically simulated using realisable k-ε turbulence model to resolve the turbulence dispersion of existing transitional flow regime. The effects of relative centrifugal force (RCF) intensity and bed fluidisation water flow rate on the water velocity and pressure distributions were studied. Simulations confirmed the swirling flow pattern governing inside the bowl. The results revealed that the impact of RCF intensity on the water field values is greater than that of bed fluidisation water flow rate. Both velocity and pressure variations inside the bowl rings followed a linear trend.     

Transport Map sampling with PGD model reduction for fast dynamical Bayesian data assimilation

The motivation of this work is to address real-time sequential inference of parameters with a full Bayesian formulation. First, the proper generalized decomposition (PGD) is used to reduce the computational evaluation of the posterior density in the online phase. Second, Transport Map sampling is used to build a deterministic coupling between a reference measure and the posterior measure. The determination of the transport maps involves the solution of a minimization problem. As the PGD model is quasi-analytical and under a variable separation form, the use of gradient and Hessian information speeds up the minimization algorithm. Eventually, uncertainty quantification on outputs of interest of the model can be easily performed due to the global feature of the PGD solution over all coordinate domains. Numerical examples highlight the performance of the method.     

Thermodynamic analysis of ethanol synthesis from hydration of ethylene coupled with a sequential reaction

Coal-based ethanol production by hydration of ethylene is limited by the low equilibrium ethylene conversion at elevated temperature. To improve ethylene conversion, coupling hydration of ethylene with a potential ethanol consumption reaction was analyzed thermodynamically. Five reactions have been attempted and compared: (1) dehydration of ethanol to ethyl ether ({\mathrm{2C}}_{\mathrm{2}}{\mathrm{H}}_{\mathrm{5}}\mathrm{OH}\iff{\mathrm{C}}_{\mathrm{2}}{\mathrm{H}}_{\mathrm{5}}{\mathrm{OC}}_{\mathrm{2}}{\mathrm{H}}_{\mathrm{5}}{\mathrm{+H}}_{\mathrm{2}}\mathrm{O}), (2) dehydrogenation of ethanol to acetaldehyde ({\mathrm{C}}_{\mathrm{2}}{\mathrm{H}}_{\mathrm{5}}\mathrm{OH}\iff {\mathrm{CH}}_{\mathrm{3}}{\mathrm{CHO+H}}_{\mathrm{2}}), (3) esterification of acetic acid with ethanol ({\mathrm{C}}_{\mathrm{2}}{\mathrm{H}}_{\mathrm{5}}{\mathrm{OH+CH}}_{\mathrm{3}}\mathrm{COOH}\iff {\mathrm{CH}}_{\mathrm{3}}{\mathrm{COOC}}_{\mathrm{2}}{\mathrm{H}}_{\mathrm{5}}{\mathrm{+H}}_{\mathrm{2}}\mathrm{O}), (4) dehydrogenation of ethanol to ethyl acetate ({\mathrm{2C}}_{\mathrm{2}}{\mathrm{H}}_{\mathrm{5}}\mathrm{OH}\iff {\mathrm{CH}}_{\mathrm{3}}{\mathrm{COOC}}_{\mathrm{2}}{\mathrm{H}}_{\mathrm{5}}{\mathrm{+2H}}_{\mathrm{2}}), and (5) oxidative dehydrogenation of ethanol to ethyl acetate ({\mathrm{2C}}_{\mathrm{2}}{\mathrm{H}}_{\mathrm{5}}{\mathrm{OH+O}}_{\mathrm{2}}\iff {\mathrm{CH}}_{\mathrm{3}}{\mathrm{COOC}}_{\mathrm{2}}{\mathrm{H}}_{\mathrm{5}}{\mathrm{+2H}}_{\mathrm{2}}\mathrm{O}). The equilibrium constants and equilibrium distributions of the coupled reactions were calculated and the effects of feed composition, temperature and pressure upon the ethylene equilibrium conversion were examined. The results show that dehydrogenation of ethanol to acetaldehyde has little effect on ethylene conversion, whereas for dehydrogenation of ethanol to acetaldehyde and ethyl acetate, ethylene conversion can be improved from 8% to 12.8% and 18.5%, respectively, under conditions of H₂O/C₂H₄ = 2, 10 atm and 300°C. The esterification of acetic acid with ethanol can greatly enhance the ethylene conversion to 22.5%; in particular, ethylene can be actually completely converted to ethyl acetate by coupling oxidative dehydrogenation of ethanol.     

X射线干涉光刻光束线关键光学元件热-结构耦合分析

为了保证上海光源X射线干涉光刻光束线的稳定性,减小热变形对实验结果的影响,对X射线干涉光刻光束线的3个关键光学元件——偏转镜、聚焦镜和精密四刀狭缝进行热-结构耦合分析。首先,计算偏转镜、聚焦镜和精密四刀狭缝所承载的功率密度;然后,建立其有限元模型;最后,获得光学元件的温度场和热变形的结果。结果表明,偏转镜和聚焦镜采用间接水冷方式可有效抑制热变形,冷却后的最大面形误差分别为7.2μrad和9.2μrad。精密四刀狭缝未冷却时,刀片组件温度介于271.56~273.27℃,刀口热变形为0.19 mm,直线导轨热变形为0.08 mm;经过铜辫子冷却后,刀片组件温度降至22.24~23.94℃,刀口热变形降至0.2μm,直线导轨热变形降至0.1μm;采用影像法和接触探头法测试后,刀口直线度、平行度和重复精度均满足技术要求。偏转镜、聚焦镜和精密四刀狭缝的热变形通过间接水冷和铜辫子的冷却方式可以得到很大程度的抑制,进而保证光斑质量。     

Experimental optimization of power-function-shaped drive pulse for stick-slip piezo actuators

Motion of a stick-slip piezo actuator is generally controlled by the parameters related to its mechanical design and characteristics of the driving pulses applied to piezoceramic shear plates. The goal of the proposed optimization method is to find the driving pulse parameters leading to the fastest and the most reliable actuator operation. In the paper the method is tested on a rotary stick-slip piezo actuating system utilized in an atomic force microscope.The optimization is based on the measurement of the actuator response to driving pulses of different shapes and repetition frequencies at various load forces. To provide it, a computer controlled testing system generating the driving pulses, and detecting and recording the corresponding angular motion response of the actuator by a position sensitive photo detector (PSPD) in real time has been developed. To better understand and interpret the experimental results, supportive methods based on a simple analytical model and numerical simulations were used as well.In this way the shapes of the single driving pulses and values of the load force providing the biggest actuator steps were determined. Generally, the maximal steps were achieved for such a combination of the pulse shapes and load forces providing high velocities at the end of the sticking mode of the actuator motion and, at the same time, lower decelerations during the slipping mode.As for the multiple driving pulses, the pulse shapes and values of repetition frequency ensuring the sticking mode of the actuator motion during the pulse rise time together with the maximum average angular rotor velocity were specified. In this way the effective and stable operation conditions of the actuator were provided.In principle, the presented method can be applied for the testing and optimization of any linear or angular stick-slip actuator.     

KJS-Y系列矿用水动力降尘器的改进设计

针对当前KJS-Y系列降尘器效率低的问题,通过调整叶轮轴向间隙与径向间隙参数,分别对不同安装参数的降尘器进行数值模拟,通过数值模拟分析特定截面压力分布情况,确定了叶轮最佳安装参数,大大提高了降尘器的工作效率,同时降低了设计成本。     

轨道式垃圾回收机器人设计与分析

针对高速公路高峰期拥挤产生的垃圾等问题,设计一种轨道式垃圾回收机器人,由光伏发电装置、机器人壳体、末端手爪、关节臂以及控制系统等组成,主体结构采用双臂三关节结构,采用西门子PLC控制系统,通过控制关节臂的旋转以及偏转、末端手爪的旋转及开合等动作来实现工作的目的。结合外场作业的特殊性,采用光伏能源装置,对其结构及控制系统进行设计,通过对机器人进行三维建模、运动和控制仿真分析,验证系统的可行性及有效性。     

Thermoplastic and low dielectric constants polyimides based on BPADA-BAPP

ABSTRACT

The thermoplastic and low dielectric constants polyimides were introduced. The polyimides were prepared by pyromellitic dianhydride (PMDA) or 4,4?-(4,4?-Isopropylidenediphenoxy)diphthalic anhydride (BPADA) as anhydride monomer and 4,4?-oxydianiline (ODA) or 2,2-bis(4-(4-aminephenoxy)phenyl)propane (BAPP) as amine monomer. The polyimides were well characterized by FT-IR, thermogravimetric analysis, dynamic thermomechanical analysis, dielectric measurement, and tensile test. The dielectric constants were 2.32–2.95 compared with 3.10 of ODA-PMDA polyimide, while partly polyimides were thermoplastic. The results indicated anhydride monomers, containing lateral methyl groups, made polyimides become thermoplastic. The results of molecular simulations via Materials Studio also proved this conclusion.     

上水口环形吹氩对中间包内渣眼形成的影响

 中间包上水口环形吹氩可以在塞棒周围形成清洗钢液的环形气幕，同时部分氩气泡随钢液进入上水口内，可以减少非金属夹杂物在水口内壁的黏附，起到防止水口堵塞的作用。然而，不合理的吹氩量会导致中间包内液面渣层受过强的气液羽流冲击而形成渣眼，使得钢液裸露并发生二次氧化，严重影响铸坯质量。采用标准 k ε 湍流模型研究中间包内流体流动，采用DPM模型和VOF模型耦合方法，研究上水口环形吹氩条件下渣眼的形成及演化规律。结果表明，上水口环形吹氩在塞棒周围形成较强的上升流，塞棒上部邻近区域存在多个涡流区；在钢液涡流的影响下，中间包液渣下层远离塞棒区域，上层向塞棒区域迁移；随着吹氩量的增大，平均湍动能增大，塞棒附近钢液速度逐渐增大，钢渣界面钢液速度先增大后减小，渣眼边缘钢液速度先增大后减小然后再增大，速度与垂直方向夹角逐渐减小；增大吹氩量，中间包熔池液面形成以塞棒为中心的渣眼，渣眼面积逐渐增大。试验条件下不产生渣眼的临界吹氩量为4.2 L/min，对应的钢渣界面最大速度为0.247 m/s，与垂直方向夹角为70°。