高性能各向异性Sm2Fe17Nx磁粉的制备

本文研究了高性能各向异性Ｓｍ２Ｆｅ１７Ｎｘ磁粉的制备工艺路线与工艺参数。优化了制备与工艺参数。已制备出磁性能达到：Ｂｒ＝１．３９Ｔ，Ｈｃｉ＝８５０ＫＡ／ｍ和（ＢＨ）ｍ＝２３６ＫＪ／ｍ＾３的各向异性Ｓｍ２Ｆｅ１７Ｎ２．８８磁粉，该磁粉的各向异性场ＨＡ达到２０Ｔ。     

机械合金化的原理及在磁性材料研究中的应用

介绍了机械合金化的原理和描述机械合金化过程的理论模型。综述了机械合金化在磁性材料研究中的应用，并对目前研究中的存在的问题及发展前景进行了分析。     

UHE电炉炼钢的冶炼工艺特点及其发展的几个问题

从实践上论述了UHE电弧炉炼钢的工艺特点,提出UHE电炉的“新三期”的新观点,并作了定量的描述;对正在发展中的UHE电炉工艺与设备提出了策略性的意见.     

电磁胀形磁场力的有限元分析

研究电磁胀形过程中工件受到的磁压力沿长度方向和厚度方向的分布是工件变形分析的基础。采用有限元方法对电磁胀形过程中作用工件上的磁场力进行了数值模拟。在磁场特性理论分析的基础上确立了模型的边界条件，得到了磁场力沿工件长度和厚度方向的分布规律。模拟结果与测量值基本吻和。     

化学沉积法制备的Ni(P)、Ni(B)纳米薄膜的结构与磁性

用化学沉积法制备了系列Ni(P),Ni(B)合金薄膜样品，用X射线衍射结构分析方法证明样品由尺寸为纳米量级的颗粒组成，样品在磁性上表现出超顺磁性，对热磁处理前后的磁学参数进行了比较研究。     

Superconductivity and magnetism in niobium doped YBa2Cu3O7 Related high Tc ceramics

Magnetic characterization has been performed on the members of the cuprateniobate RBa₂Cu₂NbO₈ (R = Pr, Nd, and La) series and R_1.5Ce_0.5Sr₂Cu₂NbO₁₀ (R = Pr, Eu, Nd, and Sm) series. The PrBCNO samples show a signature in the magnetization of a magnetic ordering at 12K. The PrCSCNO sample is nonsuperconducting and shows two distinct orderings at 17K and 53K. No such magnetic phase transition is observed down to 2K in the Nd and La based RBCNO materials or the Nd, Sm, and Eu based RCSCNO materials. Measurements of the lower critical field curve, dc irreversibility line, and critical curent densities are reported for each of the superconducting NdCSCNO, SmCSCNO, and EuCSCNO compounds.     

Effects of a Nd—Fe—B magnetic filler on the crystallization of poly(phenylene sulfide)

The crystallization of poly(phenylene sulfide) (PPS) in a polymer–magnetic Nd—Fe—B powder suspension was studied. Isothermal crystallization behavior was analyzed by way of differential scanning calorimetry, and the kinetics were described via the Avrami equation. The Avrami parameters and the crystallization times were strongly affected by both the particle size and the presence of a coupling agent coated on the filler particles. The small Nd—Fe—B particles exhibited long induction and half‐times, whereas the large particles tended to have short crystallization times. Particles ranging from 38 to 150 μ appeared to have similar crystallization times and to have no significant change in the value of Avrami index with melt crystallization temperature. As a result of these analyses, the dynamic mechanical properties were determined to correlate the fundamental polymer crystallization characteristics and the physical properties of the PPS binder. The enhancement of the wetting of the filler to the binder was promoted through the coupling agent, as confirmed by dynamic mechanical testing performed on the samples. The storage modulus typically decreased because of the presence of the uncoated small particles. Conversely, the loss modulus was enhanced because of the presence of the coated small particles in the PPS binder. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1091–1102, 2002     

精密角位移传感器及其可靠性研究

从理论上探讨了磁阻率效应，叙述了精密角位移传感器的工作原理及结构设计。传感器的分辨率已达０．０１°，通过可靠性寿命试验，传感器的失效率λ（ｔ）＜１×１０－７／ｈ。     

Peculiarities of erosion-corrosion processes

Investigations have been carried out on an erosion-corrosion apparatus to investigate the behaviour of corrosion-resistant highalloy iron-base materials containing hard phases. These materials had been optimized for increased wear resistance under complex stress conditions. As expected, in dry erosion tests, very low mass losses were established; there was little difference between the materials. Also, in corrosive environments (NaCl, H₂SO₄), the materials showed good stability; however, the duplex structures were superior to the martensitic ones. The combination of erosion and corrosion produced large differences and, in some cases, markedly reduced resistance to damage. These results confirmed observations that it is impossible to deduce the environmentally influenced mechanical behaviour of an alloy from its behaviour in separate corrosion and erosion experiments. The basic mechanisms underlying these processes have been investigated only tentatively.     

Numerical solution of the kinematic dynamo problem for Beltrami flows in a sphere

The article discusses computational aspects of the kinematic problem of magnetic field generation by a Beltrami flow in a sphere. Galerkin's method is applied with a functional basis consisting of Laplace operator eigenfunctions. Dominant eigenvalues of the magnetic induction operator and associated magnetic eigenmodes are obtained numerically for a certain Beltrami flow for magnetic Reynolds numbers up to 100. The eigenvalue problem is solved by a highly optimized iterative procedure, which is quite general and can be applied to numerical treatment of arbitrary linear stability problems.