辐射剂量对环氧树脂电子束固化行为的影响

分析了电子束剂量对环氧树脂体系辐射固化行为的影响规律。研究结果表明，电子束辐射过程中，温度由树脂辐射体系表面向内部逐渐降低，随着辐射剂量提高，树脂体系温度上升，辐射表面与内部的温度梯度加大，高辐射剂量下的温度变化缓慢。树脂辐射固化层厚度以及在相同厚度的固化程度均随辐射剂量增加，但增幅逐渐变小，树脂辐射固化度沿固化深度会加速下降。     

填充等离子体波纹波导色散曲线计算软件的设计

从一种正弦波纹波导慢波结构的色散方程理论推导出发,设计了在不同结构参数、有无电子注以及填充不同等离子体浓度的情况下,计算其色散曲线的专用软件.该软件除了具有传统的数值计算功能外,提供了一个较为友好的图形用户界面.该界面直接显示该波纹波导的结构图,同时用户可以通过该界面很方便地修改各主要参数,比较不同情况下得到的色散曲线,以获得优化的参数选择.     

Dynamic stiffness vibration analysis using a high‐order beam model

This work presents the derivation of the exact dynamic stiffness matrix for a high‐order beam element. The terms are found directly from the solutions of the differential equations that describe the deformations of the cross‐section according to the high‐order theory, which include cubic variation of the axial displacements over the cross‐section of the beam. The model has six degrees of freedom at the two ends, one transverse displacement and two rotations, and the end forces are a shear force and two end moments. Using the dynamic stiffness matrix exact vibration frequencies for beams with various combinations of boundary conditions are tabulated and compared with results from the Bernoulli–Euler and Timoshenko beam models. Copyright © 2003 John Wiley & Sons, Ltd.     

包钢薄板坯连铸厂房钢结构设计及其特点

本文介绍了包钢薄板坯连铸主厂房钢结构的设计及特点。该厂房为单层重型工业厂房，下柱为组合式H型钢双肢柱，屋面大梁为焊接工字钢梁，基本柱距为12m，车间设置295t／67t／22t吊车，屋面和墙面采用彩色压型钢板。同时，在结构选型和构造方面有新的改进和发展。     

加固改造中的结构承重体系转换

从加固改造工程的实践出发 ,探讨了混合结构向框架结构体系转换的方法和构造措施 ,为实际工程提供了新的技术思路     

预应力钢-混凝土组合梁的应用与研究

回顾了预应力钢 混凝土组合梁国内外应用与研究历史 ,分析了现有规范及理论的不足 ,并指出了有待解决的问题。     

多离子束反应共溅射制备PbTiO_3铁电薄膜的微结构研究

本文利用多离子束反应共溅射装置，分别在Ｓｉ和ＭｇＯ衬底上原位制备了ＰｂＴｉ氧化物薄膜。研究表明，利用多离子束反应共溅射技术，可以显著降低薄膜后续热处理的温度；薄膜中焦绿石结构的消失温度与薄膜中Ｐｂ的含量有关；较之Ｓｉ衬底，在ＭｇＯ衬底上的薄膜较易获得好的晶体结构和优良的薄膜表面形貌。对所观察到的现象，从衬底与薄膜相互作用的角度进行了讨论     

激光光束质量诊断技术的进展

本文介绍了激光光束质量诊断技术近年来的进展，以及国际标准化组织推荐的聚集光束测量法，指出了该技术的发展方向。     

Pyrolysis of tertiarybutylphosphine at low pressure

The pyrolysis of tertiarybutylphosphine (TBP) has been studied in the low pressure conditions used for chemical beam epitaxy (CBE). The pyrolysis studies were carried out in low pressure reactors of two different configurations, one of which is a cracker cell designed for use in a CBE system. The reaction products were studied using a quadrupole mass spectrometer. The products observed are accounted for by a reaction mechanism involving homolysis of the parent TBP molecule to produce PH₂ and C₄H₉ radicals. These undergo subsequent reactions to form the stable products C₄H₈, PH₃ and H₂, with smaller amounts of P and P₂ being produced. The production of the sub-hydride PH₂ using this cracker cell design indicates that the use of partially cracked TBP may be a promising technique for reducing the amount of carbon incorporated into the growing epitaxial layer.