Recent Results of a New Microwave SQUID Multiplexer

We present recent results of a prototype microwave SQUID multiplexer containing four SQUIDs coupled to GHz frequency resonant circuits and fed with a single microwave readout line. The system is operating at a readout frequency range of 8–10 GHz. All four SQUIDs share a common DC bias and modulation lines. A new modulation scheme is tested to eliminate the need for individual flux biasing of the SQUIDs, which extends the dynamic range of the readout. In this scheme a common modulation signal is imposed on each SQUID and the received signal is demodulated at one and two times the modulation frequency to maintain sensitivity at any flux state. We also demonstrated a microwave RF bias scheme eliminating the necessity of the DC current bias to the SQUID. Our preliminary performance tests at 4.2 K show that the input noise of the device is ∼5 pA/ .      

A novel forecasting method based on the economic and demand response for FC/WT/PV unit and a 3 in 1 TES energy storage

Due to the lack of distribution resources and increasing demand in the daily market, the use of renewable resources is increasing. But renewable sources and market prices are uncertain behavior and cause economic problems. This paper introduces a novel market participation model include wind turbine, photovoltaic, fuel cell integrated with a novel hybrid TES energy storage system (3 in 1 concept) to minimize cost and improve load demand reliability. Also, to solve he mentioned problem a novel forecasting method are proposed. This model is a new multi artificial neural network based on the complete ensemble empirical mode decomposition which is coupled with Tanh function and using RMSE, MAPE and NMAE method the error rate of the proposed method is calculated. By using this method, the forecasting accuracy is improved and also with a novel energy storage the economic issue and market reliability are improved. Also, using the stochastic model the uncertainty system's behavior are modeled to obtain an accurate results of market participation and increase demand supply. Finally, a testing system includes wind turbine/photovoltaic/fuel cell/storage system and demand response are used to prove the superiority of the proposed model in comparison to other models.     

Effect of high-flux astronomical sources on the constellation-X microcalorimeter spectrometer

We study the effects of high flux on transition-edge sensors by using a non-linear microcalorimeter model with parameters suitable for the Constellation-X mission. A photon event list was created that simulated the flux and spectrum of the Crab nebula incident on the detector when folded through the Constellation-X optics and filters. Simulations show that even at Crab levels of flux, the Con-X microcalorimeter does not “latch” into the normal state.     

高温熔盐在太阳能热发电中的应用

高温熔盐蓄热技术是熔盐在新领域的又一应用,有着广阔的发展前景。本文介绍了高温熔盐的特性及常见熔盐的种类,比较其性能的优缺点,重点探讨了硝酸熔盐在太阳能热发电中的应用。通过实例的具体数据,对其应用的可行性进行了分析,结果表明硝酸熔盐更能减少发电系统成本,将是今后太阳能热发电中主要的蓄热和传热材料。     

High-resolution,energy-dispersive microcalorimeter spectrometer for X-ray microanalysis

We have developed a prototype X-ray microcalorimeter spectrometer with high energy resolution for use in X-ray microanalysis. The microcalorimeter spectrometer system consists of a superconducting transition-edge sensor X-ray microcalorimeter cooled to an operating temperature near 100 mK by a compact adiabatic demagnetization refrigerator, a superconducting quantum interference device current amplifier followed by pulse-shaping amplifiers and pileup rejection circuitry, and a multichannel analyser with computer interface for the real-time acquisition of X-ray spectra. With the spectrometer mounted on a scanning electron microscope, we have achieved an instrument response energy resolution of better than 10 eV full width at half-maximum (FWHM) over a broad energy range at real-time output count rates up to 150 s^?1. Careful analysis of digitized X-ray pulses yields an instrument-response energy resolution of 7.2 ± 0.4 eV FWHM at 5.89 keV for Mn Kα_1,2 X-rays from a radioactive ⁵⁵Fe source, the best reported energy resolution for any energy-dispersive detector.     

浅析C波段卫星远端站系统维护工作

对民航C波段卫星TES系统和PES系统对工作原理以及系统结构功能进行阐述,根据实际工作经验,浅析C波段卫星远端站系统维护工作内容,从而提高了卫星系统的应急保障能力。     

State of the art on high-temperature thermal energy storage for power generation. Part 2—Case studies

Power generation systems are attracting a lot of interest from researchers and companies. Storage is becoming a component with high importance to ensure system reliability and economic profitability. A few experiences of storage components have taken place until the moment in solar power plants, most of them as research initiatives. In this paper, real experiences with active storage systems and passive storage systems are compiled, giving detailed information of advantages and disadvantages of each one. Also, a summary of different technologies and materials used in solar power plants with thermal storage systems existing in the world is presented.     

Improved land surface emissivities over agricultural areas using ASTER NDVI

Land surface emissivity retrieval over agricultural regions is important for energy balance estimations, land cover assessment and other related environmental studies. The Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) produces images of sufficient spatial resolution (from 15 m to 90 m) to be of use in agricultural studies, in which fields of crops are too small to be well-resolved by low resolution sensors. The ASTER project generates land surface emissivity images as a Standard Product (AST05) using the Temperature/Emissivity Separation (TES) algorithm. However, the TES algorithm is prone to scaling errors in estimating emissivities for surfaces with low spectral contrast if the atmospheric correction is inaccurate. This paper shows a comparison between the land surface emissivity estimated with the TES algorithm and from a simple approach using the Normalized Difference Vegetation Index (NDVI) for five ASTER images (28 June 2000, 15 August 2000, 31 August 2000, 28 April 2001 and 02 August 2001) of the agricultural area of Barrax (Albacete, Spain). The results indicate that differences are < 1% for ASTER band 13 (10.7 μm) and < 1.5% for band 14 (11.3 μm), but > 2% for bands 10 (8.3 μm), 11 (8.6 μm) and 12 (9.1 μm). The emissivities for the five ASTER bands were tested against in situ measurements carried out with the CIMEL CE 312-2 field radiometer, the NDVI method giving root mean square errors (RMSE) < 0.005 over vegetated areas and RMSE < 0.015 over bare soil, and the TES algorithm giving RMSE ∼ 0.01 for vegetated areas but RMSE > 0.03 over bare soil. The errors and inconsistencies for ASTER bands 13 and 14 are within those anticipated for TES, but the greater errors for bands 10-12 suggest the presence of problems related to atmospheric compensation and model assumptions about soil spectra. The NDVI method uses visible/near-infrared data co-acquired with the thermal images to estimate vegetation cover and, hence, provides an independent constraint on emissivity. The success of this approach suggests that it may be useful for daytime images of agricultural or other heavily vegetated areas, in which the TES algorithm has occasional failures.     

MPEG VBR视频流—统计特性及其模型

该文分析了已有的MPEG VBR视频流模型及其缺点,并在此基础上对VBR视频流的统计特性进行了研究,实验结果表明,通过对整个视频流进行场景划分（聚类）,聚类间用Markov调制链建模,而每一聚类中独立的场景则可以采用TES模型基于GOP（Group Of Picture)而非帧进行建模,则该方法既能避免状态空间过大,又能避免帧间周期性的自相关,因而能够更好地拟合VBR视频流序列的一阶和二阶统计特性,同时,对独立场景的GOP分布函数可以采用Gamma函数进行拟合,自相关函数则可以采用双指数函数更好地拟合。     

Plastic collapse moment equations of throughwall axially cracked elbows subjected to in-plane bending moment

A throughwall axial crack may develop in an elbow or pipe bend due to service related degradation mechanism. It is very important to know the plastic collapse moment (PCM) of an elbow in the presence of a throughwall axial crack. The existing PCM equations of throughwall axially cracked (TAC) elbows are based on very few test data points of Griffiths without detailed analyses and also the range of applicability of their proposed equations are limited. Further, they do not differentiate between closing and opening modes of bending although deformation characteristics under these two modes are completely different. Therefore, the present study has been undertaken to investigate through 3D elastic-plastic finite element analysis. A total of 84 elbows with various sizes of axial cracks (a/D_m = 0-1), different wall thickness (R/t = 5-20), different elbow bend radii (R_b/R = 2, 3) and two different bending modes, namely closing and opening have been considered in the analysis. Elastic-perfectly plastic stress-strain response of material has been assumed. Both geometric and material non-linearity are considered in the analysis. Crack closing is observed in most of the cases. To capture the crack closure effect, contact analysis has been performed. Plastic collapse moments have been evaluated from moment-end rotation curves by twice-elastic slope method. From these results, closed-form equations are proposed to evaluate plastic collapse moments of elbows under closing and opening mode of bending moment. The predictions of these proposed equations are compared with the test data available in the literature. Matching between predictions and experimental results is found to be satisfactory.