大规模海上风电多电压等级混合级联直流送出系统

海上风电场拥有更加丰富与稳定的风能资源,同时具备适宜大规模开发的优点,发展潜力巨大,是未来风电的主要发展趋势.文中总结分析了现有工程和理论研究中涉及的大规模海上风电直流送出拓扑,包括仅采用模块化多电平换流器的柔性直流换流站系统和二极管整流单元-模块化多电平换流器混合直流换流站系统,归纳了各方案的运行特点.为解决现有方案运行灵活性低、可行性差的问题,提出了一种多电压等级混合级联直流送出系统,从技术性和经济性两方面对方案进行了对比分析.最后,设计了多电压等级混合级联直流送出系统协调控制策略,通过PSCAD/EMTDC仿真分析对并网方案进行了可行性验证.     

Recycle use of phosphorous mixer extractant to extract indium

The stripping and regeneration of the loaded organic phase of phosphorous mixer extractant (PPD) were studied. The mixed solutions (3 niol/L HC1 +2 mol/L ZnCl2) were used as the stripping agent and more than 99% of indium can be stripped after three-stage stripping when the volume ratio of organic phase to stripping agent is 1:1. The organic phase can be recycled to use after regeneration with HC1. The parallel contrast experiments with D2EHPA (di-2-ethyl hexyl phosphoric acid) were carried out under the same conditions. The results show that the mixer extractant has good reusability and the stripping and regeneration of PPD are superior to those of DJ3HPA.     

Thermal management of edge‐lit wide color gamut backlight for LCD using red laser diodes and cyan LEDs

The color gamut is one of the critical parameters that dictate the image quality of displays. The liquid crystal displays using white color light‐emitting diodes (LEDs) as the backlight, though having been widely employed recently, are not very satisfactory in terms of their color gamut because of the broad spectrum inherent to white LEDs. This prompted the authors to develop improved liquid crystal displays using an edge‐lit wide color gamut backlight that used red laser diodes and cyan LEDs. Generating laser beams with high color purity, the laser diodes are light sources with a significant effect on expanding the color gamut. However, laser diodes, red ones in particular, have unfavorable thermal characteristics. To cope with this shortcoming, the authors clearly defined the restrictive criteria for laying out two kinds of light source on the edge‐lit backlight and made a prototype 55‐type laser backlight for performance evaluation.     

The experimental research of a digital sampling signal converter

The sensitivity and rise time of a transient characteristic of a digital sampling signal converter are experimentally researched. The sampling converter is built at a clocked tunnel-diode comparator.     

High temperature field effect hydrogen and hydrocarbon gas sensors based on SiC MOS devices

The growing need for reliable, efficient, high temperature hydrogen and hydrocarbon monitoring has fueled research into novel structures for gas sensing. Metal oxide semiconductor (MOS) devices employing a catalytic metal layer have emerged as one of the leading sensing platforms for such applications, owing to their high sensitivity and inherent capability for signal amplification. The limited operating temperature of such devices employing silicon as the semiconductor has led research efforts to focus on replacing them with devices based on silicon carbide (SiC). More recently, MOS devices having different oxide layers exhibiting improved sensing performance have emerged. Considering the amount of research that has been carried out in this area in recent times, it is important to elucidate the new findings and the gas interaction mechanisms that have been ascribed to such devices, and bring together several theories proposed by different research groups. In this paper we first highlight the needs which have driven research into SiC based field effect hydrogen and hydrocarbon sensors, illustrate the various structures being investigated, and describe the device evolution and current status. We provide several sensing examples of devices that make use of different oxide layers and demonstrate how their electrical properties change in the presence of the gases, as well as presenting the hydrogen gas interaction mechanisms of these sensors.     

可扩展SIP多媒体会议系统的设计与实现

随着NGN网络及3G IMS应用的发展,基于SIP的多媒体会议系统受到了越来越多的关注.然而基于SIP的多媒体会议相关标准和产品还不成熟.针对此问题,研究了IETF SIPPING、XCON工作组关于SIP多媒体会议系统的相关标准,设计并实现了一种基于SIP的可扩展多媒体会议系统.该系统利用模块化设计方式,不同的会议功能由相对独立的模块实现,具有良好的可扩展性.测试结果表明系统实现了多媒体会议的功能,符合IETF多媒体会议标准,具有较高的通用性.     

970 nm超辐射发光二极管弯曲脊形波导数值分析

本文基于光束传播法(beam propagation method, BPM)和时域有限差分法(finite difference time domain method, FDTD)建立了分析模型,模拟并分析了弯曲脊形波导超辐射发光二极管(superluminescent light emitting diode, SLD)不同结构参数(刻蚀深度、曲率半径、脊形宽度)对波导损耗的影响和倾斜脊形波导不同结构参数(刻蚀深度、脊形宽度、倾斜角度、发射波长)对模式反射率的影响。计算表明,弯曲脊形波导的刻蚀深度和曲率半径是影响波导损耗的重要因素。刻蚀深度较浅使波导对光场的限制作用较弱,过小的曲率半径会使模式传输泄露严重,损耗大大增加。脊形宽度越大,波导损耗越小,其对波导损耗影响较小。脊形波导的端面倾斜角度是抑制模式反射率的重要因素,脊形宽度增加,模式反射率逐渐减小,并在特定的几个角度形成的奇点达到最小值。刻蚀深度对于模式反射率的影响作用较小,但随着刻蚀深度的增加,奇点发生的角度产生了向小角度偏移。在特定的倾斜角度范围内,随着波长减小,奇点的数目会逐渐增加。研究结果可对设计具有优越性能的SLD器件...     

基于积分宽度法测量发光二极管结温方法的研究

本文提出了一种基于光谱积分宽度法来测量发光二极管(light emitting diode, LED)结温的新方法,并进行了理论分析和实验研究。本方法主要分为光谱数据采集、定标函数的测定和结温测量三个过程。首先,为了测量成本的降低和精度的提高而采用在正常工作电流下采集LED光谱数据,并通过采用不同温度下的光谱积分宽度与选定的某一基准状态下的值逐差可得到线性度达0.99以上的定标函数,并通过此定标函数可实时测定任意状态下的结温。其次,为了比较本方法测量结温的精确性,分别对单色和白光LED采用本方法和业界主流的正向电压法,通过自行设计的基于积分宽度法结温测量系统和美国Mentor Graphics公司的T3Ster型仪器的测量结果进行比较,两种方法测出的结温最大偏差为2.1℃,在可接受的误差范围内。实验结果表明积分宽度法测结温具有高效便捷且低成本的的特点,具有一定的应用前景。     

Deterministic Polymorphic Engineering of MoTe2 for Photonic and Optoelectronic Applications

Developing selective and coherent polymorphic crystals at the nanoscale offers a novel strategy for designing integrated architectures for photonic and optoelectronic applications such as metasurfaces, optical gratings, photodetectors, and image sensors. Here, a direct optical writing approach is demonstrated to deterministically create polymorphic 2D materials by locally inducing metallic 1T′-MoTe₂ on the semiconducting 2H-MoTe₂ host layer. In the polymorphic-engineered MoTe₂, 2H- and 1T′- crystalline phases exhibit strong optical contrast from near-infrared to telecom-band ranges (1–1.5 µm), due to the change in the band structure and increase in surface roughness. Sevenfold enhancement of third harmonic generation intensity is realized with conversion efficiency (susceptibility) of ≈1.7 × 10⁻⁷ (1.1 × 10⁻¹⁹ m² V⁻²) and ≈1.7 × 10⁻⁸ (0.3 × 10⁻¹⁹ m² V⁻²) for 1T′ and 2H-MoTe₂, respectively at telecom-band ultrafast pump laser. Lastly, based on polymorphic engineering on MoTe₂, a Schottky photodiode with a high photoresponsivity of 90 AW⁻¹ is demonstrated. This study proposes facile polymorphic engineered structures that will greatly benefit realizing integrated photonics and optoelectronic circuits.     

用于超外差接收机提供本振源的高功率510 GHz单片集成三倍频器

本文介绍了一种基于砷化镓材料的高功率490~530 GHz单片集成三倍频器。基于提出的对称平衡结构,该三倍频器不仅可以实现良好的振幅和相位平衡,用来实现高效的功率合成,还可以在没有任何旁路电容的情况下提供直流偏置路径以保证高效倍频效率。同时,开展容差性仿真分析二极管关键电气参数与结构参数对倍频性能的影响研究,以便最大化提升倍频性能。最终,在大约80~200 mW的输入功率驱动下,研制的510 GHz三倍频,在490~530 GHz频率范围内,输出功率为4~16 mW,其中峰值倍频效率11%。在522 GHz频点处,该三倍频在218 mW的输入功率驱动下,产生16 mW的最大输出功率。该三倍频器后期将用于1 THz的固态外超外差混频器的本振源。