注水开发后期提高油砂体采收率方法探讨

注水开发后期，研究油砂体剩余油分布规律，实施油砂体综合治理，完善油砂体注采关系是提高最终采收率的重要途径之一。按照含油面积、采出程度及生产动态特点将油砂体分为3类。根据每类砂体的不同特点，采取相应的治理措施，取得了较好效果，累积增油18．5kt，增加水驱储量1．08Mt。注水开发后期提高油砂体采收率必须以剩余油的分析研究为指导，以井网对剩余可采储量的控制为前提，以油水井措施的联动为手段，从而达到提高最终采收率的目的。     

The influence of raw material characteristics on the industrial pelletizing process and pellet quality

Industrial pelletizing of sawdust was carried out as a designed experiment in the factors: sawdust moisture content, fractions of fresh pine, stored pine and spruce. The process parameters and response variables were energy consumption, pellet flow rate, pellet bulk density, durability and moisture content. The final data consisted of twelve industrial scale runs. Because of the many response variables, data evaluation was by principal component analysis of a 12 × 9 data matrix. The two principal component model showed a clustering of samples, with a good reproducibility of the center points. It also showed a positive correlation of energy consumption, bulk density and durability all negatively correlated to flow rate and moisture content. The stored pine was more related to high durability and bulk density. The role of the spruce fraction was unclear. The design matrix, augmented with the process parameters was a 12 × 6 matrix. Partial least squares regression showed excellent results for pellet moisture content and bulk density. The model for durability was promising. A 12 × 21 data matrix of fatty- and resin acid concentrations measured by GC–MS showed the differences between fresh and stored pine very clearly. The influence of the spruce fraction was less clear. However, the influence of the fatty- and resin acids on the pelletizing process could not be confirmed, indicating that other differences between fresh and stored pine sawdust have to be investigated. This work shows that it is possible to design the pelletizing process for moderate energy consumption and high pellet quality.     

Investigation of the structure and properties of modified Armenian minerals for polymer-based composites

The results of investigation of the modification of the Armenian minerals with fluorine-containing oligomers show that a modified product appears when the mineral fillers are treated with fluoroalkanes. The product preserves the structure of the fillers with a “grafted” fluoroalkane layer in which chlorine atoms locate mainly over their periphery. The composite materials based on heterochained polymers and the modified fillers possess a stronger wear resistance and a low friction coefficient.     

循环水换热器的泄漏及判断

对换热器的泄漏原因进行了分析,同时,根据抚顺石化公司石油二厂的实际情况,对换热器发生泄漏后的现象、判定方法进行了归纳和总结,并提出了几种有效的漏点查找手段和管理方法。     

Assessing the potential of renewable energy sources in Turkey

To meet Turkey’s growing energy demand, the installed electric power capacity of 27.8 GW in 2001 has to be doubled by 2010 and increased fourfold by 2020. The difference between Turkey’s total primary energy supply (TPES) of from its own sources and total final consumption (TFC) is projected grow from 1 quad (1.06–2.06) in 1999 to 5.71 quads (2.79–8.5) in 2020 (1 QUAD=293.071 TWh). Turkey’s limited amount of fossil fuels has a present average ratio of proved reserves of 97.38 quads to production rate of 3.2 quads yr⁻¹ of about 30 years. Turkey’s reliance on fossil fuel-based energy systems to meet the growing demand is most likely to exacerbate the issues of energy insecurity, national environmental degradation, and global climate change in increasing proportions. Economically-feasible renewable energy potential in Turkey is estimated at a total of ca. 1.69 quads yr⁻¹ (495.4 TWh yr⁻¹) with the potential for 0.67 quads yr⁻¹ (196.7 TWh yr⁻¹) of biomass energy, 0.42 quads yr⁻¹ (124 TWh yr⁻¹) of hydropower, 0.35 quads yr⁻¹ (102.3 TWh yr⁻¹) of solar energy, 0.17 quads yr⁻¹ (50 TWh yr⁻¹) of wind energy, and 0.08 quads yr⁻¹ (22.4 TWh yr⁻¹) of geothermal energy. Pursuit and implementation of sustainability-based energy policy could provide about 90 and 35% of Turkey’s total energy supply and consumption projected in 2010, respectively. Utilization of renewable energy technologies for electricity generation would necessitate about 23.2 Mha (29.8%) of Turkey’s land resources.     

����Ȼ��Ϊ��Դ��ѹ��ʽ������ϵͳ

以天然气为能源，用燃气机代替电动机驱动压缩机并充分利用发动机废热、工业余热以及低品位环境热量的采暖、空调装置——燃气压缩式热泵近年来发展迅速。美国燃气设备的总装机容量已达到1．2GW，日本燃气机热泵占全部燃气制冷设备的29％，总装机容量大约1GW，燃气机热泵在英国、法国、德国、瑞士等都得到了较快的发展与应用。中研究了以天然气为驱动能源的压缩式热泵的特点及能量利用率，分析并测试了该系统的运行特性及交工况特性，进行了各种工况及转速下的实验研究。结果表明，该系统具有较好的部分负荷特性、一次能源利用率及交工况特性，为一种绿色高效的供热空调系统。     

常减压蒸馏装置换热网络的节能优化

利用夹点技术理论对耗能严重的某炼油厂常减压蒸馏装置进行用能诊断分析;并结合热力学原理得到两种优化换热网络,节能效果显著。     

Residual stresses and transformation toughening in MoSi2 composites reinforced with partially stabilized zirconia

The results of study of the effects of yttria stabilization (0–6 mol.%) on the room-temperature fracture behavior and toughening mechanisms in zirconia-reinforced MoSi₂ are presented in this paper. Transformation toughening is shown to occur only in composites reinforced with zirconia particles stabilized with 2 mol.% yttria. However, the fracture toughness levels are comparable in the other composites with yttria levels between 0 and 6 mol.%. Toughening in the other composites is attributed to the combined effects of residual stress, microcrack shielding/anti-shielding and/or crack deflection. A rigorous micromechanics-based model is presented for the estimation of residual stress levels in brittle materials reinforced with phases that can transform during cooling or under stress. The model is applied successfully to the rationalization of the observed fracture and toughening phenomena.     

Computer analysis,design and simulation of horizontal ground heat exchangers

This paper presents a new computerized procedure for dealing with the design of horizontal ground heat exchangers (HGHE). The computer program is based on the transient model of coupled nonlinear partial differential equations governing heat and mass flow in soils. The model is two-dimensional and delineates the operation of ground heat storage with the HGHE and such phenomena as freezing/thawing and drying/rewetting of soil moisture. Comprehensive climatological data, such as ambient temperature, solar radiation, wind velocity, rainfall, snowfall, snow characterstics, and water vapour pressure is used to simulate conditions at the ground surface over any required length of time. The package can be applied to any geographical location by changing climatic and soil data input. The designer has the possibility of selecting any of 12 types of soils from sand to clay, 12 commercial heat pumps, nine different configurations of the HGHE, 16 plastic pipes for ground coils, and 13 ground coil fluids. The program, however, does not calculate the length of the HGHE but it evaluates the thermodynamic performance of a ground heat pump system and provides comprehensive data on thermal and hydraulic conditions in ground heat storage. The length of the ground heat exchanger is obtained from a line source theory model or from site dimensions and pipe spacing. Computed results for ground heat exchanger operation correlate fairly well with experimental data. Simulation of temperature and moisture content in the ground for natural conditions (no heat extraction/deposition) showed a fair agreement with field data. The entire computer program is user-friendly, interactive, menu-driven, and written in FORTRAN 77.     

短周期超晶格AlP／GaP能带结构的转变及其带间的光跃迁

介绍了间接跃迁的半导体ＡｌＰ与ＧａＰ形成的超晶格，由于零折叠效应，实现了能带由间接带隙向直接带隙的转变，从而增加了带间的光跃迁几率，并推导了该几率的表达式。