吸附精制提高催化裂化柴油的安定性

用卸出的催化裂化平衡催化剂对催化裂化柴油进行吸附精制，取得了很好的效果。精制油收率99％以上，其安定性达到了优级轻柴油的标准（沉渣＜2．0mg／100mL，色号≤16）。精制后柴油的胶质下降约1个百分点，对吸附物的组成分析表明，其氮含量是柴油的17倍以上。对精制油的分析表明，吸附精制可明显降低柴油的酸度和碱性氮化物的含量。     

城市生活垃圾能源利用探讨

报道了城市有机废弃物转化为能源的几种途径。在管式反应器内甘蔗渣裂解气化制煤气以及在高压釜内湿式裂解气化制煤气液体产品，可得到中值煤气。也研究了甘蔗渣二步法糖化和糖发酵，当ＰＨ为３．６，酵母浓度为１．３３％，乙醇产率可达理论值的６４．８６％。     

利用含钨废催化剂生产钨酸的工业实践

笔者较为详细地阐述了利用含钨废催化剂生产钨酸的工艺流程、各工序反应原理及其操作工艺实践、产品质量情况、原辅材料单耗等。实践证明 ,该工艺实用性强 ,具有显著的经济效益、社会和环保效益。     

焦化干气一步法预处理多功能催化剂的工业侧线试验

对焦化干气一步法预处理工艺催化剂进行了工业侧线试验。考察了温度和体积空速对催化剂的活性及催化剂稳定性和加氢选择性的影响。催化剂为以复合型ZnO和过渡金属氧化物为活性组分的多功能催化剂,用于低温下焦化干气中烯烃加氢和硫化物脱除。试验结果表明,在压力1.6MPa、温度285～350℃、空速100～500h-1的条件下,多功能催化剂能将焦化干气中烯烃的体积分数由8%～14%降至0,总硫含量从10～70μg/g脱除至5μg/g以下;经28d考核,多功能催化剂仍保持良好的烯烃加氢和硫化物脱除性能,可用于精制焦化干气。     

聚丙烯催化剂的研发进展

综述了用于丙烯聚合的Ziegler-Natta催化剂在给电子体技术及催化剂制备工艺等方面,茂金属催化剂在制备丙烯均聚物、丙烯共聚物及特殊聚丙烯等方面,非茂单活性中心催化剂在丙烯活性聚合、丙烯与极性单体共聚及水介质聚合等方面的研发进展;讨论了聚丙烯催化剂的前景。     

Formation of C4 species in the deactivation of a Pd/SiO2 catalyst during the selective hydrogenation of acetylene

The deactivation characteristics of Pd/SiO₂ in the selective hydrogenation of acetylene were correlated with changes in the amount of the C4 species produced. The amounts of butenes produced changed in parallel with the catalyst activity, indicating that the rate limiting step for butene production was the same as that for acetylene hydrogenation. On the other hand, the amount of 1,3-butadiene produced changed, showing a maximum with catalyst deactivation because 1,3-butadiene is an intermediate in the sequential reaction process which involves both the production and consumption of 1,3-butadiene. This was verified by a simultaneous TG/reaction experiment showing that 1,3-butadiene was a precursor of green oil. The catalyst showed a self-regenerative behavior in its activity and the amounts of C4 species produced during the early stage of deactivation because two opposite factors, which contributed to either the lowering or the promotion of activity, were involved in the process. A specific type of polymer species, produced during the initial period of deactivation, is proposed to be responsible for the promotion of catalyst activity.     

Development and Commercial Application of a Novel Catalyst DVR—1 for Catalytic Cracking of Daqing Vacuum Residue

A newly developed catalyst type DVR-1 for catalytic cracking of Daqing vacuum resid was put into use in a commercial VRFCC unit,This catalyst features uniquely active matrix and modified ultra-stable zeolite.The commercial application results show that the DVR-1 type catalyst has the advantage of high heavy oil conversion,good metal tolerance nd gooed stability for catalyst regeneration,The FCC tests have shown Favorable product distribution,acceptable product quality and enormaous economic benefits whe processing the feedstock containin 75%-100% Daqing VR.     

乙炔在磁稳定床中的选择性加氢研究

 制备了一种磁性Pd/Al₂O₃催化剂，采用磁稳定床考察了活性组分负载量、反应条件及CO浓度对乙炔加氢反应性能的影响。结果表明，当反应温度80℃、反应压力1.5MPa、空速9000h－1、磁场强度（H）25kA/m时，乙炔转化率为100％，乙烯选择性可达81％，具有优良的乙炔加氢活性和乙烯选择性，优于相同反应条件下的进口催化剂；250h稳定性实验结果表明，磁性Pd/Al2O3催化剂具有良好的初活性和乙烯选择性，催化剂性能稳定。     

Poly-functional Catalyst Development for Benzene Production from Alkyl-aromatic Mixture via Hydrodealkylation

Development of a poly-functional catalyst that has higher hydrodealkylation activity based on 15% Cr/γ- Al₂ O₃ was researched for benzene production from an alkyl-aromatic mixture via hydrodealkylation. For this goal, the effects of the promoters like Fe, Co, or Ni and their concentrations on the activity of a Cr/Al₂ O₃ catalyst were investigated. Toluene + n-heptane + tetrahydrotiophene (89:10:1 w%) model mixture, which has the same content as industrial aromatics, was used as feedstock. The activities of catalysis in reactions of hydrodealkylation, hydrocracking, and hydrogenolize with respect to conversions of toluene, heptane, and tetrahydrotiophene were tested, respectively. As to the obtained results, the catalyst including 5% Fe has a higher hydrodealkylation activity, compared to the catalyst including Co, and especially to the alumocrom catalyst not including a promoter, while it has a lower coke formation and reduced activity to the catalyst including Ni.     

负载化非茂单活性中心催化剂乙烯聚合的研究

在硅胶上负载了双(N-环己基-3-叔丁基水杨醛亚胺基)二氯化锆配合物,得到负载化非茂单活性中心催化剂。该催化剂用于乙烯聚合,考察了配合物用量、共聚单体1-己烯用量、聚合温度、聚合压力、聚合时间、三乙基铝用量对乙烯聚合性能的影响及对聚合物的相对分子质量、相对分子质量分布、熔体流动指数和密度的影响。实验结果表明,负载化非茂单活性中心催化剂保持了原均相催化剂的乙烯聚合性能;该催化剂在淤浆聚合工艺中聚合平稳,所得聚合物的颗粒形态良好。