城市轨道交通客流密集度指数研究

基于轨道交通物联网监测数据，从点、线、面三个层级，构建不同时间粒度车站、线路、网络的客流密集度指数计算模型和算法。车站客流密集度指数模型综合考虑影响车站密集度指数的关键区域（出入口、站台、楼扶梯、换乘通道）的拥挤程度和拥挤范围因素；线路的客流密集度指数模型综合考虑车站和区间的影响；网络的客流密集度指数模型由各线路的客流密集度指数加权得到。测试结果表明，提出的模型计算结果与实际地铁客流出行规律一致，可较好地反映地铁拥挤程度，为地铁客流运营拥挤状态评价和辅助决策提供技术支持。     

京津冀一体化轨道交通协调发展研究和展望

京津冀协同发展上升为国家战略,需要区域轨道交通协调发展来支撑和服务于区域一体化发展。从京津冀协同发展空间布局及产业转移的角度出发,提出各种轨道交通的层次及服务功能,在此基础上对轨道交通协调发展研究提出应抓住规划,处理好既有轨道交通与新增轨道交通、客货运主要通道与交通引导(TOD)、各种轨道交通间协调衔接等方面关系;加快投融资改革,实施同步建设;创新体制,实现管理协调发展;加大政策扶持,达到轨道交通可持续发展等方面进行研究,同时对区域轨道交通进行展望,对京津冀一体化轨道交通协调发展研究方向、研究领域和空间进行了浅议。     

基于知识积累的软件运行剖面生成方法及黑箱测试技术

软件的黑箱测试是一个面向用户的软件测试方法，当它以运行剖面为基础生成测试案例时，运行剖面的完备性将直接影响其测试结果的可信性，基于知识积累的软件运行剖面生成方法就是试图通过知识的获取和积累使生成的运行剖面日趋完备，从而达到黑箱测试技术在某些特殊的软件测试领域中更具实用和可信。文章讨论了软件 运行剖面的完备性和软件失效类等概念，提出了一种基于知识各界的软件运行剖面生成广阔圾黑箱测试技术，这种技术现已     

上海轨道交通一号线102号列车C1车体顶盖结构设计

介绍上海轨道交通一号线102号列车C1车体顶盖结构的设计原理、顶盖各结构件的组成,并阐述大断面铝型材在车体顶盖中的应用,以及标准化、模块化的先进设计理念在顶盖设计中的应用。     

浅谈香港西铁项目计划管理

香港西铁项目投资规模巨大，工程复杂。为确保工程能按时完工，投入运营，参与各方秉承科学计划管理理念、采用先进技术精心组织实施，业主在招标阶段制定了一套完善的计划管理体系，承包商能够利用先进技术编制了全面、详细、形象的施工计划并加以实施，咨询工程师能够严格把关，协调各方关系，确保了项目顺利完工。     

Passenger railway reform in the last 20 years - European experience reconsidered

It is about 20 years since the rail reform process in Europe began with the separation of infrastructure from operations in Sweden. This paper reviews the entire process, examining the objectives of reform, the different models adopted, and the key elements of separation of infrastructure from operations, competition both through open access and franchising and regulation and infrastructure charging. It is concluded that separation of infrastructure from operations involves costs, but is the most effective way of achieving within mode competition. Where operations do not greatly overlap and open access passenger and freight are unimportant, leasing infrastructure to passenger franchisees may be effective, but the model of vertical integration as separate subsidiaries within a holding company structure makes it difficult to ensure a level playing field for new entrants and is only effective where the vertically integrated operator remains dominant.     

基于GT-Power和Simulink的柴油机各缸不均匀性闭环控制

为改善各缸工作不均匀性,以TBD314V8柴油机为研究对象,基于缸压计算得到的各缸IMEP和CA50作为反馈变量,控制变量为各缸的喷油量和喷油提前角,建立了GT-Power与Simulink联合仿真模型,通过模型分析了轨压、负荷和喷油提前角对爆压、IMEP和CA50不均匀率的影响,并对影响因素进行参数灵敏度量化分析,验证了闭环控制对各缸不均匀性的改善效果。结果表明：轨压对爆压、IMEP和CA50不均匀率影响较小;负荷对IMEP不均匀率影响最大,且随着负荷的增加呈线性下降;喷油提前角对爆压不均匀率和CA50不均匀率影响最大,且CA50不均匀率随着喷油提前角的增大呈线性增加。经过闭环控制后,各缸不均匀性得到明显改善。     

A shockwave profile model for traffic flow on congested urban arterials

In this paper a new traffic flow model for congested arterial networks, named shockwave profile model (SPM), is presented. Taking advantage of the fact that traffic states within a congested link can be simplified as free-flow, saturated, and jammed conditions, SPM simulates traffic dynamics by analytically deriving the trajectories of four major shockwaves: queuing, discharge, departure, and compression waves. Unlike conventional macroscopic models, in which space is often discretized into small cells for numerical solutions, SPM treats each homogeneous road segment with constant capacity as a section; and the queuing dynamics within each section are described by tracing the shockwave fronts. SPM is particularly suitable for simulating traffic flow on congested signalized arterials especially with queue spillover problems, where the steady-state periodic pattern of queue build-up and dissipation process may break down. Depending on when and where spillover occurs along a signalized arterial, a large number of queuing patterns may be possible. Therefore it becomes difficult to apply the conventional approach directly to track shockwave fronts. To overcome this difficulty, a novel approach is proposed as part of the SPM, in which queue spillover is treated as either extending a red phase or creating new smaller cycles, so that the analytical solutions for tracing the shockwave fronts can be easily applied. Since only the essential features of arterial traffic flow, i.e., queue build-up and dissipation, are considered, SPM significantly reduces the computational load and improves the numerical efficiency. We further validated SPM using real-world traffic signal data collected from a major arterial in the Twin Cities. The results clearly demonstrate the effectiveness and accuracy of the model. We expect that in the future this model can be applied in a number of real-time applications such as arterial performance prediction and signal optimization.     

城市轨道交通对房地产价值的影响研究——以武汉市轨道交通为例

城市轨道交通是一种快捷、高效、节能环保的大容量城市客运交通方式,而且对于沿线房地产的开发具有巨大的带动作用.本文定性分析了城市轨道交通对房地产价值的影响机理,并采用地价影响函数模型,对武汉城市轨道交通1号线地价影响函数相关参数进行了标定.定量研究证实了城市轨道交通时房地产价值的拉动作用.最后提出了武汉市轨道交通与房地产...     

改善轮轨接触状态的车轮型面几何设计方法

改进了车轮型面设计方法,给出了设计方法的解析数学表达式,将轮对等效锥度与轮轨型面接触状态联系起来,对设计实例进行了轮轨几何接触、非赫兹滚动接触和车辆动力学性能分析.研究结果表明:轮轨接触点能够均匀分散分布;由于接触斑面积增大约23%,最大接触压力降低约21%,使轮轨滚动接触应力降低了约20%;装备实例型面的车辆临界速度...