针摆传动中弓背齿廓的受力分析

针对针摆传动中的高精度要求,给出了求最佳修形量的优化方法,在对齿廓修形产生的几何相对转角进行计算的基础上提出了弓背齿廓,进行了理论分析研究,并通过动态受力分析方法得到齿面接触力和接触应力.采用弓背齿廓修形方式计算结果表明,最佳弓背齿廓修形可以获得较小几何相对转角,有效减小回转误差,实现高精度传动,以适用于有高精度要求的针摆传动中.     

Breakthrough innovations in intermodal freight transport

Breakthrough innovations, whether technological, organizational or both, are a necessity if the market share of intermodal freight transport is to expand. The main growth potential lies in the markets for flows over short distances, for perishable and high-value commodities, for small consignments, and for flows that demand speed, reliability and flexibility. It will take radical innovations to produce a breakthrough in the modal split and allow these new markets to be conquered. This special issue is based on papers presented at an international conference on freight transport automation and multimodality, held in Delft in May 2002, that are illustrative of the direction of breakthrough research and development (R&D) aimed at increasing the market share for intermodal transport.     

Discussions on rail in urban areas and rail history

This paper includes discussions on rail in urban areas and railway history. More specifically commonly used terms and definitions for rail services, policy and practice in urban areas are discussed followed by an overview of railway developments around the world.     

Use of combinatorial auctions in the railway industry: Can the “invisible hand” draw the railway timetable?

Rail capacity is currently administratively allocated in Europe, whereas the economic literature has often contemplated the opportunity of introducing market mechanisms, auctions in particular, into this industry. This article tries to fill the gap between practice and theory. It first describes the properties of rail capacity (rigidity and non-homogeneity) and shows that because of its very nature, this capacity must be allocated through combinatorial auctions. As identified by the economic literature, using combinatorial auctions introduces a lot of complexity (winner determination and information burden) into the allocation process. To deal with this complexity, some form of centralized planning is necessary to design the right market mechanisms and to allocate capacity. This could have strong consequences on the current deregulation process.     

RS20型交换机的配置方法

对RS20交换机的配置进行探索研究具有很强的实用性,重点介绍了RS20交换机在轨道交通无线通信系统中的应用,通过不断的实践摸索,初步掌握了一套快速配置RS20交换机的方法,并对这种配置方法进行了探讨.     

Nonlinear three-dimensional wagon-track model for the investigation of rail corrugation initiation on curved track

A nonlinear wagon-track model on curved track has been developed to characterize rail corrugation formation due to self-excitation of the wheel-rail stick-slip process. In this model, wagon movements were described using up to 78 degrees of freedom (DOFs) to model a three-piece freight bogie. Innovatively, the wheelset movements are described using nine DOFs, including torsional and bending modes about the longitudinal and vertical directions. The track modelling is considered as a one-layer structure (two rail beams on discrete spring and damper elements). The wheel sliding after creepage saturation is considered in the wheel-rail interface modelling. Simulation of a case study shows that the frequencies of the wheel stick-slip process are composed of the basic frequency, which might come from the combined effect of sleeper-passing frequency and one-third of the combined torsional and bending frequency of the wheelset, and the double and triple basic frequencies, which form the wavelengths of rail corrugation at different situations.     

辗压混凝土机械化施工的体会

本文以交通部第二公路工程局1990年在安徽省312国道进行辗压混凝土施工中,如何解决诸如辗压混凝土路面结构、路面平整度、摊铺厚度、混合料级配、离析的影响以及自卸车倒料、压实、运输与摊铺等问题,并参考有关资料,进一步探讨了辗压混凝土施工工艺及施工机械的合理配套.     

Modelling of wheels and rail discontinuities in dynamic wheel-rail contact analysis

A classification of wheel-rail contact is given. Difference is made between modelling of a running wheel with continuous single-point-contact, as is common practice in wheel-rail contact analysis, and a wheel with transient double- or multi-point-contact, which may occur for rail irregularities with curvatures larger than that of the wheel circumference. It is shown that application of the first model for these irregularities will strongly underestimate the contact forces as it does not describe occurring mechanisms correctly. Further, it is shown that in principle it is not possible to describe the second type of contact fully correct with a lumped wheel model. Both wheel models are formulated mathematically for some basic contact cases. Afterwards, results are applied to a linear track model. Analytical closed-form solutions are found in the frequency domain for arbitrary type of contact and numerically transformed to the time domain. Finally, the necessity is shown to avoid situations where transient multiple-point-contact may occur (like rail joints) in practice.     

An exploratory investigation of the impact of ramp metering on driver acceleration behavior

Ramp metering has been proven as an effective freeway management strategy; however, the impact of ramp metering on drivers' acceleration behavior has not been fully investigated. A better understanding of acceleration behavior changes with ramp metering is critical to the adequate design of ramp metering facilities. In this study, drivers' speed and acceleration data were collected at two representative metered ramps in Los Angeles, California. The speed and acceleration profiles under meter-on and meter-off scenarios were compared. Statistical results demonstrated that ramp metering affects drivers' acceleration behavior at ramp acceleration lane. It was found that at the metered ramp with short existing acceleration length, the average acceleration rate from ramp meter stop bar to 500 ft downstream under meter-on scenario (4.72 ft./s²) is approximately 40% higher than when meter-off (3.18 ft./s²). The design of acceleration lane length for metered on-ramps should therefore take into account the potential impacts of ramp metering on driver acceleration behavior.     

城市轨道交通客流密集度指数研究

基于轨道交通物联网监测数据，从点、线、面三个层级，构建不同时间粒度车站、线路、网络的客流密集度指数计算模型和算法。车站客流密集度指数模型综合考虑影响车站密集度指数的关键区域（出入口、站台、楼扶梯、换乘通道）的拥挤程度和拥挤范围因素；线路的客流密集度指数模型综合考虑车站和区间的影响；网络的客流密集度指数模型由各线路的客流密集度指数加权得到。测试结果表明，提出的模型计算结果与实际地铁客流出行规律一致，可较好地反映地铁拥挤程度，为地铁客流运营拥挤状态评价和辅助决策提供技术支持。