基于计算机仿真的公路线形设计评价

对公路设计评价方法进行了研究,提出了基于计算机仿真的公路设计安全评价方法。对公路的特点和设计评价手段进行了分析,提出了建立公路仿真系统,对设计方案和设计指标进行评价的思路。分析了公路仿真系统的特点,建立了基于Multi-Agent的仿真系统框架。通过建立计算机仿真模型--汽车模型、驾驶员模型和公路模型,仿真汽车在公路上的运行情况,得到汽车的运行速度、加速度等定量指标,从而对公路设计指标进行评价。通过计算机仿真,可以使设计人员在设计阶段就可以发现设计存在的问题,及时修改设计,提高设计的科学性、合理性。     

Wheel-rail contact models for vehicle system dynamics including multi-point contact

Advanced modelling of rail vehicle dynamics requires realistic solutions of contact problems for wheels and rails that are able to describe contact singularities, encountered for wheels and rails. The basic singularities demonstrate themselves as double and multiple contact patches. The solutions of the contact problems have to be known practically in each step of the numerical integration of the differential equations of the model. The existing fast, approximate methods of solution to achieve this goal have been outlined. One way to do this is to replace a multi-point contact by a set of ellipses. The other methods are based on so-called virtual penetration. They allow calculating the non-elliptical, multiple contact patches and creep forces online, during integration of the model. This allows nearly real-time simulations. The methods are valid and applicable for so-called quasi-Hertzian cases, when the contact conditions do not deviate much from the assumptions of the Hertz theory. It is believed that it is worthwhile to use them in other cases too.     

An analysis of rail freight operational efficiency and mode share in the British port-hinterland container market

The growth in container shipping poses considerable challenges to efforts to reduce the negative externalities associated with freight transport. There are particular concerns about the impacts of the associated port-hinterland freight flows. Through empirical research, this paper examines trends in the operational efficiency of the British port-hinterland container rail freight market and to assess the impacts of any changes on the overall sustainability of this market. Original survey work conducted in 2007 and 2015 has allowed longitudinal and cross-sectional analysis of the characteristics of this market.The survey findings reveal that rail’s mode share of port container throughput (in TEU) has increased from 14.7% in 2007 to 16.6% in 2015 and it is likely that its share of the associated hinterland activity has also risen. Rail was carrying 25% more TEU by 2015 without an increase in train service provision. Increases in mean train capacity and mean load factor were observed, leading to growth in the mean train load from 44 TEU in 2007 to 55 TEU in 2015. This considerable improvement in operational efficiency is expected to have reduced the negative externalities per unit of transport activity associated with the rail-borne hinterland container flows, though scope is identified for further improvements in sustainability.     

轨道交通预制U形梁力学性能研究

以青岛蓝色硅谷城际轨道交通高架桥预制U形梁为工程背景,运用有限元方法对比分析先张法和后张法预制U形梁内力、应力状态及变形3方面的力学性能。对先张法和后张法U形梁进行静载试验,详细分析试验荷载下U形梁的刚度及抗裂性等指标。结果表明,先张法预应力U形梁力学性能优越,具有推广应用潜力。     

轨道交通信号控制系统LCC估算方法研究与应用

从产品全生命周期成本概念出发,阐述了轨道交通信号控制系统生命周期的特点和成本构成;从企业视角提出了一种轨道交通信号控制系统的LCC估算方法;通过企业项目成本管理信息化系统统计产晶LCC的各项数据,结合财务数据进行归一化估算,并定期进行回归迭代,规范化实施分析与评价,从而得出产話的LCC改进建议,为公司战略决策提供了重要参考依据。     

A comparison of modelled and real-life driving profiles for the simulation of railway vehicle operation

A key factor in determining the performance of a railway system is the speed profile of the trains within the network. There can be significant variation in this speed profile for identical trains on identical routes, depending on how the train is driven. A better understanding and control of speed profiles can therefore offer significant potential for improvements in the performance of railway systems. This paper develops a model to allow the variability of real-life driving profiles of railway vehicles to be quantitatively described and predicted, in order to better account for the effects on the speed profile of the train and hence the performance of the railway network as a whole. The model is validated against data from the Tyne and Wear Metro, and replicates the measured data to a good degree of accuracy.     

500米长轨营业线火车市场运费与概预算编制办法计算运费对比分析

随着《铁路基本建设项目投资管理办法》(铁总计统〔2017〕179号)及《关于铁路建设项目清理概算工作的通知》(发改投资电〔2019〕1号)文的出台,标志着铁路建设项目概算清理工作,将逐步交由建设单位按照不突破初步设计批复金额进行处理,因此初步设计阶段如何确保招标预算金额的准确性,体现的越来越为重要,本文通过对500米长轨营业线火车市场运费与编制办法计算运费的分析,量化两者费用存在的差异,列明差异原因,并提出相关建议。     

Airport capacity increase via the use of braking profiles

Many airports are encountering the problem of insufficient capacity, which is particularly severe in periods of increased traffic. A large number of elements influence airport capacity, but one of the most important is runway occupancy time. This time depends on many factors, including how the landing roll procedure is performed. The procedure usually does not include the objective to minimize the runway occupancy time. This paper presents an analysis which shows that the way of braking during landing roll has an essential impact on runway throughput and thus on airport capacity. For this purpose, the landing roll simulator (named ACPENSIM) was created. It uses Petri nets and is a convenient tool for dynamic analysis of aircraft movement on the runway with given input parameters and a predetermined runway exit. Simulation experiments allowed to create a set of nominal braking profiles that have different objective functions: minimizing the runway occupancy time, minimizing noise, minimizing tire wear, maximizing passenger comfort and maximizing airport capacity as a whole. The experiments show that there is great potential to increase airport capacity by optimizing the braking procedure. It has been shown that by using the proposed braking profiles it is possible to reduce the runway occupancy time even by 50%.     

柴油机活塞销孔型线对比分析研究

针对某柴油机活塞销孔的磨损问题,分别借助有限元方法和EHD仿真方法研究了不同销座结构匹配多种销孔型线对接触应力的影响,及不同活塞销孔型线对润滑特征评价参数的影响。综合研究表明,活塞销孔型线与热变形匹配不合理所引起的润滑状态恶化是导致活塞销孔磨损的直接原因,因此通过合理调整销孔型线可使接触应力均匀,润滑状态良好,并有效降低活塞销座磨损风险。     

宽带低剖面微带滤波器天线设计

论文设计了一种具有全向辐射特性的宽带低剖面微带滤波器天线。利用作为导纳变换器的耦合线,连接微带天线和滤波器的第二个谐振器。在该设计中,微带天线不仅是辐射器也是带通滤波器的最后一阶谐振器。因此,减少了滤波器与天线之间的传输损耗。该天线具有25%的阻抗带宽,3.5mm厚的低剖面,全向辐射方向图和高的带外抑制度。