泡沫铝阳极氧化工艺研究

介绍泡沫铝阳极氧化工艺。通过试验分析对比WL-SY酸蚀工艺和碱蚀工艺的差异,探讨泡沫铝阳极氧化过程中硫酸浓度、电流密度、温度、Al3＋浓度、时间、杂质元素对阳极氧化膜的影响。     

锂离子电池硅基负极材料研究进展

本文主要介绍近年来硅及含硅材料作为锂离子电池负极材料的研究进展，包括硅单质、硅的氧化物以及硅的金属化合物和其它硅基多元化合物；分析了硅基材料作为锂离子电池负极材料存在的问题；阐述了硅基材料作为锂离子电池负极材料的研究前景。     

Electrochemical properties of some cobalt antimonides as anode materi-als for lithium- ion batteries

Some cobalt antimonides have been prepared and studied as the candidate anode materials for lithium ion batter-ies. Reversible capacities of 424,423 and 546 mA·h·g-1 were measured at the first cycle for as-solidified CoSb2, CoSb3 and annealed CoSb3 respectively. A low lithium ions diffusion coefficient in the order of 10-16 m2·s-1 was estimated from the coulometric titration measurements in the annealed CoSb3 electrode. It was found that the electrochemical properties of fine powders are significantly better than coarse powders. However the SEM picture shows that the nano-sized CoSb3 powders gathered to larger granules, which worsens somewhat the capacity retention of the nano-sized materials, although the volume capacities of the annealed and ball milled CoSb3 remain near twice of that of graphite after 50 cycles.     

阴极保护用阳极

介绍了牺牲阳极材料中镁基、锌基、铝基阳极的化学成分和性能特点，以及多种外加电流阴极保护用阳极材料的特点。通过对石墨阳极、高硅铸铁阳极和铅银合金阳极、镀铂阳极和混合金属氧化物阳极的性能比较，认为混合金属氧化物阳极是最为理想和最有前途的辅助阳极材料。     

Q235-304L电偶对在Na2S溶液中的电偶腐蚀行为研究

用电化学法和浸泡法研究了Q235-304L电偶对在3种不同浓度的Na2S溶液中的电偶腐蚀行为,用SEM观察试样的表面形貌.结果表明:在3种溶液中Q235钢的阳极过程均为混合控制,而304L的阴阳极过程均为电化学控制;偶接后Q235钢表面阳极金属的溶解过程与阴极过程同时进行,其阳极溶解电流大于电偶电流值;电偶腐蚀效应随阴阳极面积比的增大而增大;随着S2-浓度的升高,电偶对中Q235钢的腐蚀速率减小,电偶腐蚀效应也随之降低.     

锂盐碳阳极的可湿性与临界电流密度研究

含有锂盐的碳阳极的可湿性和发生阳极效应的临界电流密度值明显提高，可以防范阳极效应的发生，文中讨论了锂盐的作用机理。     

Composite corrosion inhibitors for secondary alkaline zinc anodes

The corrosion inhibition property of PEG600 and In(OH)3 as composite corrosion inhibitors for secondary alkaline zinc electrodes was studied, and the inhibition efficiency was determined as 81.9%. The research focused on the mechanism by the methods of electrochemical impedance spectroscopy, polarization curves and IR spectroscopy. The results indicate that the corrosion inhibition effectiveness is attributed to the joint inhibition of anodic zinc dissolution and cathodic hydrogen evolution. And the anodic process is depressed to a greater extent than the cathodic process. The synergistic mechanism of the composite inhinbitors proves to be the enhancement of adsorption of PEG600 by In(OH)3. Potentiostatic experiment results and SEM images verify the inhibition of dendritic growth by the composite inhibitors.     

天然石墨／锑复合材料作为锂离子电池负极材料嵌／放锂性能研究

研究了用简单混杂和球磨方法制备的天然石墨／锑复合材料作为锂离子电池负极材料的嵌／放锂性能以及循环过程中嵌／放锂容量衰减机理。复合材料中的锑以独立的可逆嵌／放锂反应参与吸／放锂过程并显著提高复合材料的嵌／放锂容量。较大颗粒的锑在嵌／放锂过程中体积剧变导致颗粒破碎、电接触恶化而渐渐失去嵌／放锂活性，因此由简单混杂所获得石墨／锑复合材料在循环过程中容量逐渐降低；采用球磨方法在天然石墨颗粒表面形成弥散分布的小颗粒锑则能获得具有较高可逆容量和较好的循环稳定性的石墨／锑复合锂离子电池负极材料。     

Electrochemical properties of AB5 type hydrogen storage alloy as anode electrocatalyst of PEMFC

1　INTRODUCTIONIn recent years, the application of the roomtemperature type ( < 100 ℃) polymer electrolytemembrane fuel cells(PEMFCs) as a primary powersource in electric vehicles and portable equipmentsetc has received increasing attention[1 4]. Usuallyin a PEMFC system, platinum is chosen as the e lectrode electrocatalyst, however, it results in ahigh cost PEMFC system for commercialization be cause Pt is a high cost, source limit metal. So,looking fo…