连续重整再生器试运故障的排除

利用引进专利技术设计、制造、安装的连续重整装置的再生器具有内件复杂和安装精度高的特点，其安装检验和气密试验通过后，在催化剂流动循环试运行时出现了催化剂跑漏、压力降升高的故障。经过中外专家通力合作，在反应系统不停车的情况下，及时排除了故障，保证了催化重整装置一次试车投产成功。     

连续重整装置仿真系统的设计开发

为提高操作人员对连续重整装置开停工及事故处理的熟练程度，并对生产进行指导，采用半机理模型结合设计和现场数据介发的连续重整装置仿真系统已在现场成功投用。介绍了该仿真系统的软硬件结构、动态模型及仿真功能。     

Probing the early stages of polymerization of ethylene on a model chromium/silica catalyst by Fourier transform infrared spectroscopy

The nature of the interaction of monomer, and the early stages of growth of oligomers of ethylene on a rather more uniform surface of Cr/SiO₂ catalyst than hitherto studied has been investigated by differenceFTIR spectroscopy using C₂D₄ and C₂H₄ as reactants both with and without subsequent treatment of the catalyst with CO andTHF. The active catalyst was prepared by reaction of vapour phase CrO₂Cl₂ with the vicinal hydroxyls of the silica surface. Three distinct kinds of methylene groups were detected. Arguments are given for assigning the peaks at 2935 and 2860 cm^–1 to CH₂ groups directly bound to the active site and those at 2920 and 2850 to CH₂s in the growing chain well removed from the Cr. The peaks at 2160 and 2165 cm^–1 are attributed to CD₂ groups hydrogen bonded to surface hydroxyls.     

吸附精制提高催化裂化柴油的安定性

用卸出的催化裂化平衡催化剂对催化裂化柴油进行吸附精制，取得了很好的效果。精制油收率99％以上，其安定性达到了优级轻柴油的标准（沉渣＜2．0mg／100mL，色号≤16）。精制后柴油的胶质下降约1个百分点，对吸附物的组成分析表明，其氮含量是柴油的17倍以上。对精制油的分析表明，吸附精制可明显降低柴油的酸度和碱性氮化物的含量。     

城市生活垃圾能源利用探讨

报道了城市有机废弃物转化为能源的几种途径。在管式反应器内甘蔗渣裂解气化制煤气以及在高压釜内湿式裂解气化制煤气液体产品，可得到中值煤气。也研究了甘蔗渣二步法糖化和糖发酵，当ＰＨ为３．６，酵母浓度为１．３３％，乙醇产率可达理论值的６４．８６％。     

利用含钨废催化剂生产钨酸的工业实践

笔者较为详细地阐述了利用含钨废催化剂生产钨酸的工艺流程、各工序反应原理及其操作工艺实践、产品质量情况、原辅材料单耗等。实践证明 ,该工艺实用性强 ,具有显著的经济效益、社会和环保效益。     

焦化干气一步法预处理多功能催化剂的工业侧线试验

对焦化干气一步法预处理工艺催化剂进行了工业侧线试验。考察了温度和体积空速对催化剂的活性及催化剂稳定性和加氢选择性的影响。催化剂为以复合型ZnO和过渡金属氧化物为活性组分的多功能催化剂,用于低温下焦化干气中烯烃加氢和硫化物脱除。试验结果表明,在压力1.6MPa、温度285～350℃、空速100～500h-1的条件下,多功能催化剂能将焦化干气中烯烃的体积分数由8%～14%降至0,总硫含量从10～70μg/g脱除至5μg/g以下;经28d考核,多功能催化剂仍保持良好的烯烃加氢和硫化物脱除性能,可用于精制焦化干气。     

聚丙烯催化剂的研发进展

综述了用于丙烯聚合的Ziegler-Natta催化剂在给电子体技术及催化剂制备工艺等方面,茂金属催化剂在制备丙烯均聚物、丙烯共聚物及特殊聚丙烯等方面,非茂单活性中心催化剂在丙烯活性聚合、丙烯与极性单体共聚及水介质聚合等方面的研发进展;讨论了聚丙烯催化剂的前景。     

Formation of C4 species in the deactivation of a Pd/SiO2 catalyst during the selective hydrogenation of acetylene

The deactivation characteristics of Pd/SiO₂ in the selective hydrogenation of acetylene were correlated with changes in the amount of the C4 species produced. The amounts of butenes produced changed in parallel with the catalyst activity, indicating that the rate limiting step for butene production was the same as that for acetylene hydrogenation. On the other hand, the amount of 1,3-butadiene produced changed, showing a maximum with catalyst deactivation because 1,3-butadiene is an intermediate in the sequential reaction process which involves both the production and consumption of 1,3-butadiene. This was verified by a simultaneous TG/reaction experiment showing that 1,3-butadiene was a precursor of green oil. The catalyst showed a self-regenerative behavior in its activity and the amounts of C4 species produced during the early stage of deactivation because two opposite factors, which contributed to either the lowering or the promotion of activity, were involved in the process. A specific type of polymer species, produced during the initial period of deactivation, is proposed to be responsible for the promotion of catalyst activity.     

Development and Commercial Application of a Novel Catalyst DVR—1 for Catalytic Cracking of Daqing Vacuum Residue

A newly developed catalyst type DVR-1 for catalytic cracking of Daqing vacuum resid was put into use in a commercial VRFCC unit,This catalyst features uniquely active matrix and modified ultra-stable zeolite.The commercial application results show that the DVR-1 type catalyst has the advantage of high heavy oil conversion,good metal tolerance nd gooed stability for catalyst regeneration,The FCC tests have shown Favorable product distribution,acceptable product quality and enormaous economic benefits whe processing the feedstock containin 75%-100% Daqing VR.