论培育高素质企业家队伍

笔者结合企业现状提出了培育高素质企业家的重要性，重点阐述了企业家所具备的几种素质是他们取得成功的重要保证和关键，提出了培育高素质企业家队伍的根本途径。     

醇处理减缓低渗气藏水锁效应的实验研究

水锁效应是低渗透砂岩气藏开发中普遍存在的问题.为提高低渗透砂岩气藏的气体有效渗透率,尝试用醇来减缓低渗透砂岩气藏水锁效应.以室内实验为基础,时醇处理原理进行了探讨,评价并比较了几种醇溶液用于减缓低渗透砂岩气藏水锁效应的应用效果,实验结果显示:醇处理措施可以有效的减缓低渗透砂岩气藏中由水锁效应产生的伤害.     

A dual-porosity dual-permeability model for acid gas injection process evaluation in hydrogen-carbonate reservoirs

The Pre-Caspian basin is one of the most prolific in terms of oil and gas exploration and hydrogen and carbon compounds energy production around the world. The major hydrogen and carbon compounds reservoirs are Carboniferous reef and platform hydrogen-carbonate rocks. The original fluids under subsurface conditions contain 15% hydrogen sulfide and 4% carbon dioxide. Acid hydrogen and carbon compounds reinjection is not only an environmentally friendly solution for disposal of produced greenhouse gases but also enhances oil recovery and supplies more fuel energy. On the other hand, the presence of fractures makes hydrogen-carbonate reservoir characteristics nature more complicated than conventional sandstone reservoirs, which leads to a tremendous challenge to evaluate the gas injection process. In this work, a dual-porosity dual-permeability formulation was used to model the dual-medium nature incorporating matrix system with high porosity and low permeability and fracture network with low porosity and high permeability. After matching PVT experiments, a ten pseudo-components fluid model was generated for running compositional simulation. The miscible hydrogen and carbon compounds injection was simulated as an effective enhanced oil recovery approach. Sensitivity analysis such as timing of injection gas, injection rate, well spacing and completion interval have proposed the optimal condition for the miscible hydrogen and carbon compounds flooding. The recommended optimum hydrogen and carbon compounds injection scenario is twice higher oil recovery compared with natural depletion. The results of this study illustrate further the practicability of pseudo-components splitting and lumping for compositional simulation to evaluate the performance of hydrogen and carbon compounds injection processes, and are of great importance using the dual-porosity dual-permeability method performing numerical simulation of naturally fractured hydrogen-carbonate reservoirs.     

沙垒田凸起东段曹妃甸11构造大型油田成藏主控因素分析

为了加强对渤海西部海域油气田成藏特征及规律研究,对沙垒田凸起东段曹妃甸11构造大型油田的形成进行了研究。研究表明:1渤中凹陷东南缘(主要烃源岩供给区)沙河街组和东营组烃源岩为曹妃甸11构造大型油田的形成奠定坚实的基础;2NE(北东)向断层两期活动控制油气富集,晚侏罗世-白垩世时期,NE向断层左旋活动分割基底,控制沙垒田凸起东西段构造形态;新近纪时,NE向断层右旋走滑活动,披覆之上的新近系地层形成负花状构造,这不仅控制了东段大型披覆背斜圈闭的形成与展布,而且控制了盖层高点;3新近系优势运移路径最终控制大油田的形成位置。曹妃甸11-1和曹妃甸11-6大型油田都是大面积源岩生成的油气沿多条优势运移路径最后向一个方向聚集而形成的。     

Long-term performance and binder chemical structure evolution of elastomeric bituminous geomembranes

This paper presents the results of uniaxial tensile tests, flow-rate measurements, and size-exclusion chromatography (SEC), which are used to evaluate the ageing of elastomeric bituminous geomembranes (BGMs) that were installed 6, 10, 15, 20, and 30 years ago in ponds at two different sites in France. SEC was used to detect oxidation and the absence of polymer in the bitumen at the surface of the 20- and 30-year-old BGMs. The results indicate that, for BGMs exposed less than 20 years, there was no oxidation or degradation of the polymer at the core. However, the elastomeric polymer was altered at the core of the 30-year-old BGM, resulting in an embrittlement of the bitumen, but this did not affect the mechanical properties of the glass veil and nonwoven polyester geotextile in the BGM core. Lastly, the flow rates through the BGM measured according to EN 14150 are still below 10^?6 m³ m^?2 d^?1, which indicates that the elastomeric bituminous GM is still watertight after 30 years of exposure.     

Long-term performance of a HDPE geomembrane stabilized with HALS in chlorinated water

A high density polyethylene geomembrane (GMB) stabilized with hindered amine (light) stabilizers (HALS or HAS) is immersed in four chlorinated water solutions with a simulated free chlorine concentration range of 0.5–5 ppm at five different temperatures (25, 40, 65, 75, and 85 °C) for 70 months. Standard and high pressure oxidative induction time (OIT) tests are performed to monitor antioxidants depletion while melt flow index, tensile, and stress crack resistance (SCR) tests are conducted to monitor degradation in physical and mechanical properties. Degradation in the GMB properties occurred shortly after immersion in chlorinated water at all temperatures except at 25 °C. Increasing the free chlorine concentration resulted in faster degradation of the tensile properties and SCR. The predicted time to nominal failure based on SCR ranges between 25 years at 40 °C and 5 years at 85 °C in chlorinated water (with 0.5 ppm free chlorine). A comparison between the degradation in SCR of this GMB and a GMB with a different resin and without HALS shows significant difference in their performance in chlorinated water but not in other incubation media.     

The effects of run‐of‐river dam spill on Columbia River microplankton

Dams, increasingly common in riverine systems worldwide, are particularly prevalent on the Columbia River (CR) in the United States. Hydroelectric projects, including both storage and run‐of‐river (i.e., minimal storage) structures, on the mainstem CR highly manage water flow, often by releasing water over (rather than through) dams as “spill.” To test the effects of run‐of‐river dam spill on microplankton abundance and composition, we sampled above and below two dams in the lower CR before and during spill conditions in spring 2016 and during and after spill conditions in late summer 2007. We tested the effects of location (i.e., above vs. below dams), spill condition (i.e., before, during, and after spill), and their interaction on microplankton abundance. Generally, diatoms were most abundant during springtime, whereas cyanobacteria were most abundant in late summer. Most taxa were not significantly different in abundance above and below dams, regardless of spill status; although cyanobacteria abundance was marginally higher below dams in summer 2007 (p = .04). Abundances of all taxa were significantly different between pre‐spill and spill periods in spring 2016, whereas only diatom and flagellate abundances were significantly different between spill and post‐spill periods in summer 2007. We conclude that spill conditions may influence microplankton abundance, but are not likely to affect microplankton communities on either side of run‐of‐river dams on the CR. This is important information for dam managers concerned about ecosystem impacts of spill.     

An evaluation of enhanced oil recovery strategies for a heavy oil reservoir after cold production with sand

Cold heavy oil production with sand (CHOPS) is the process of choice for unconsolidated heavy oil reservoirs with relatively high gas content. The key challenge of CHOPS is that the recovery factor tends to be between 5% and 15%, implying that the majority of the oil remains in the ground after the process is rendered uneconomic. Continued cold production (without sands) is not productive for a post‐CHOPS reservoir because of the low oil saturation and depleted reservoir pressure in the wormhole regions. There is a need to develop viable recovery processes for post‐CHOPS reservoirs. Here, different follow‐up processes are examined for a post‐CHOPS heavy oil reservoir. In post‐CHOPS cold water flooding, severe water channeling is ineffective at displacing high viscosity heavy oil. Hot water flooding improves the sweep efficiency and produces more oil compared with cold water flooding. However, the swept region is limited to the domain between the neighboring wormhole networks, and the energy efficiency of the process is relatively poor. Compared with the hot water flooding case, steam flooding achieves higher oil production rates and lower water use. A cyclic steam stimulation strategy achieves the best performance regarding oil production rates and water usage. Based on our results, it is observed that thermally based techniques alone are not capable to recover the oil economically for post‐CHOPS reservoirs. However, it is suggested that techniques with combined use of thermal energy and solvent could potentially yield efficient oil recovery methods for these reservoirs. Copyright © 2015 John Wiley & Sons, Ltd.     

胡尖山地区长4+5层油气富集控制因素研究

胡尖山地区长4+5油层组储层非均质性强、物性差异较大,开展该区储层地质特征研究,尤其是针对胡尖山地区长4+5油层组的构造形态、储层特征、孔隙类型、油藏类型的研究,分析原油的分布特征,总结原油富集区的聚集特征、重点分析分布特征及控制因素,得到胡尖山地区长4+5层油气富集的规律,可加深对优质储层形成机理和分布规律的认识,为油藏勘探开发提供有利的方向。     

The Assessment of Fracture Geometrical Properties on the Performance of Conventional In Situ Combustion

Abstract

The aim of the present work is to evaluate the effect of fractures geometrical properties such as orientation, density, location, and networking on the conventional fire flooding (CFF) process performance through simulation analysis. Combustion parameters of a fractured low-permeable carbonate heavy oil reservoir in Iran called Kuh-E-Mond (KEM); applied for simulation study and simulator has been validated with KEM combustion tube experimental data. The validated model was modified to study CFF in 3D semi-scaled combustion cells. Simulation results confirmed that CFF is more feasible in the case of densely fractured reservoirs such as those in the Middle East.