聚合氯化铝铁的制备、使用及混凝机制研究

以氯化铝和氯化铁为原料制备出一系列不同铝铁物质的量比及碱化度的无机高分子混凝剂——聚合氯化铝铁（PAFC）,并应用于地表水的混凝处理过程。考察PAFC的混凝效能及产生的絮体特性,进而对其使用条件进行优化并分析混凝机制。结果表明,PAFC为多羟基桥连的铝铁聚合物,水解后发生电中和作用使胶粒脱稳,而后通过羟桥和氧桥联接产生架桥和卷扫沉淀作用,混凝效果优异。PAFC的pH适用范围较宽,但铝铁物质的量比对其水解过程影响较大,在铝铁物质的量比为7:1、碱化度为0.5、投加量为10 mg/L时,絮体的粒度及生长速度最大,此时浊度和UV₂₅₄的去除率分别达84.93%和78.52%。此外,正交实验的结果表明水力条件对PAFC的混凝效能影响显著,其最佳使用条件为：快搅时间为20 s、快搅速度为200 r/min、慢搅时间为15 min、慢搅速度为40 r/min。     

Adaptive actuator failure compensation design for unknown chaotic multi‐input systems

In this paper, an adaptive control approach is designed for compensating the faults in the actuators of chaotic systems and maintaining the acceptable system stability. We propose a state‐feedback model reference adaptive control scheme for unknown chaotic multi‐input systems. Only the dimensions of the chaotic systems are required to be known. Based on Lyapunov stability theory, new adaptive control laws are synthesized to accommodate actuator failures and system nonlinearities. An illustrative example is studied. The simulation results show the effectiveness of the design method. Copyright © 2014 John Wiley & Sons, Ltd.     

A Global Maximum Error Controller Based Nonlinearity Aware TPWL Method for Reducing Nonlinear Systems

Abstract

Model order reduction is a common practice to reduce large order systems so that their simulation and control become easy. Nonlinearity aware trajectory piecewise linear is a variation of trajectory piecewise linearization technique of order reduction that is used to reduce nonlinear systems. With this scheme, the reduced approximation of the system is generated by weighted sum of the linearized and reduced sub-models obtained at certain linearization points on the system trajectory. This scheme uses dynamically inspired weight assignment that makes the approximation nonlinearity aware. Just as weight assignment, the process of linearization points selection is also important for generating faithful approximations. This article uses a global maximum error controller based linearization points selection scheme according to which a state is chosen as a linearization point if the error between a current reduced model and the full order nonlinear system reaches a maximum value. A combination that not only selects linearization points based on an error controller but also assigns dynamic inspired weights is shown in this article. The proposed scheme generates approximations with higher accuracies. This is demonstrated by applying the proposed method to some benchmark nonlinear circuits including RC ladder network and inverter chain circuit and comparing the results with the conventional schemes.     

旋流分离-颗粒床耦合气固分离装备旋流场静压分布

针对一种集旋风分离器和内置颗粒床优势于一体的新型耦合气固分离装备在无灰负荷及固定床操作条件入口环形空间、分离空间和灰斗内静压场进行研究。结果表明，静压沿周向为非对称分布，轴向为非均匀分布，径向则呈中心低两侧高分布；且存在着静压分布的降压区(0?~180?，以入口处为0?)和增压区(180?~360?)；装备中心的负压及旋流作用在轴向高度H=6.41D(D为旋风壳体内径)以下对静压的影响不再显著；内置颗粒床外壁附近存在“滞留层”，有利于提高装备的分离性能。根据实验数据给出了静压周向分布和静压轴向分布的经验公式。     

A case-deletion diagnostic for penalized calibration estimators and BLUP under linear mixed models in survey sampling

The penalized calibration technique in survey sampling combines usual calibration and soft calibration by introducing a penalty term. Certain relevant estimates in survey sampling can be considered as penalized calibration estimates obtained as particular cases from an optimization problem with a common basic structure. In this framework, a case deletion diagnostic is proposed for a class of penalized calibration estimators including both design-based and model-based estimators. The diagnostic compares finite population parameter estimates and can be calculated from quantities related to the full data set. The resulting diagnostic is a function of the residual and leverage, as other diagnostics in regression models, and of the calibration weight, a singular feature in survey sampling. Moreover, a particular case, which includes the basic unit level model for small area estimation, is considered. Both a real and an artificial example are included to illustrate the diagnostic proposed. The results obtained clearly show that the proposed diagnostic depends on the calibration and soft-calibration variables, on the penalization term, as well as on the parameter to estimate.     

A practical Equivalent Electrical Circuit model for Proton Exchange Membrane Fuel Cell (PEMFC) systems

An alternative Equivalent Electrical Circuit for Proton Exchange Membrane Fuel Cells is modelled in this study. Both I–V characteristics and H₂ consumptions corresponding to generated power under load and no-load conditions are investigated. For this purpose, H₂ consumptions and I–V characteristics of three different sized PEMFCs are tested. There is a very good harmony between the model results and measured values (relative error %0.7, %6.4 and %2.5 for FC-A, FC-B and FC-C respectively). In the proposed model current passes only on parallel resistance and not on serial resistance at no-load condition. Thus, a FC with higher parallel resistance should be preferred. Another key output of this study is that based on the proposed model, performance comparison of FCs can be performed with the parameters defined in this work. Proposals made in this study can easily be used for performance analysis of FCs under for both steady state and transient analysis.     

Gradient-based recursive parameter estimation for a periodically nonuniformly sampled-data Hammerstein–Wiener system based on the key-term separation

The identification of the Hammerstein–Wiener (H-W) systems based on the nonuniform input–output dataset remains a challenging problem. This article studies the identification problem of a periodically nonuniformly sampled-data H-W system. In addition, the product terms of the parameters in the H-W system are inevitable. In order to solve the problem, the key-term separation is applied and two algorithms are proposed. One is the key-term-based forgetting factor stochastic gradient (KT-FFSG) algorithm based on the gradient search. The other is the key-term-based hierarchical forgetting factor stochastic gradient (KT-HFFSG) algorithm. Compared with the KT-FFSG algorithm, the KT-HFFSG algorithm gives more accurate estimates. The simulation results indicate that the proposed algorithms are effective.     

SINA: Semantic interpretation of user queries for question answering on interlinked data

The architectural choices underlying Linked Data have led to a compendium of data sources which contain both duplicated and fragmented information on a large number of domains. One way to enable non-experts users to access this data compendium is to provide keyword search frameworks that can capitalize on the inherent characteristics of Linked Data. Developing such systems is challenging for three main reasons. First, resources across different datasets or even within the same dataset can be homonyms. Second, different datasets employ heterogeneous schemas and each one may only contain a part of the answer for a certain user query. Finally, constructing a federated formal query from keywords across different datasets requires exploiting links between the different datasets on both the schema and instance levels. We present Sina, a scalable keyword search system that can answer user queries by transforming user-supplied keywords or natural-languages queries into conjunctive SPARQL queries over a set of interlinked data sources. Sina uses a hidden Markov model to determine the most suitable resources for a user-supplied query from different datasets. Moreover, our framework is able to construct federated queries by using the disambiguated resources and leveraging the link structure underlying the datasets to query. We evaluate Sina over three different datasets. We can answer 25 queries from the QALD-1 correctly. Moreover, we perform as well as the best question answering system from the QALD-3 competition by answering 32 questions correctly while also being able to answer queries on distributed sources. We study the runtime of SINA in its mono-core and parallel implementations and draw preliminary conclusions on the scalability of keyword search on Linked Data.