模糊技术的发展及在相关领域中的应用

本文介绍了模糊技术的发展和现状，以及在相关领域中的应用情况，并且讨论了模糊技术在我国的产业化方向等问题。     

四辊铝箔轧机预控参数在线整定

介绍Ф210mm/Ф500mm× 800mm四辊液压轧机厚度预控系统中采用人机界面实现参数在线调整的方法,能大大提高预控参数的控制精度,减少轧机产品的厚度误差,是厚度自动控制的一项创新.     

焊接设备中计算机控制系统的抗干扰

本文分析提出焊接设备中影响计算机控制系统的几种主要干扰。结合实际工作,提出了解决的措施和方法。     

电动车制动能量再生反馈控制研究

研究了电动汽车制动过程中的能量回馈，设计了混合励磁无刷电动机在汽车制动过程的能量再生反馈控制系统。以脉宽调制调压调速系统为例，研究各种制动态下的能量回馈过程。并将其安装在EV6600电动汽车上进行试验，结果表明：该控制系统可达到10%左右的能量回收效率。     

Calculated hardenability for improved consistency of properties in heat treatable engineering steels

Hardenability is one of the most important parameters controlling the heat treated properties of engineering steels. It affects the consistency of response for microstructure, hardness, strength, toughness, and dimensional change (distortion). This study illustrates that a major benefit of controlling hardenability is improving the consistency of dimensional distortion resulting from heat treatment. To facilitate the supply of steels to hardenability limits, especially restricted hardenability, a new technique was developed for the prediction of Jominy hardenability from chemical composition. The technique, termed the “Database Method,” uses measured Jominy hardenability and chemical composition data, contained in a database, to calculate the hardenability for a query composition. Using up to ten known steels, selected from the database with compositions closely matching that of the query steel, a small adjustment is made to the measured hardenability of each known steel allowing for the small difference in composition between the query and chosen steel. The final calculated result for the query steel is taken as the average of the various estimates. The basis of the Database Method is explained, and the advantages are illustrated for selecting engineering grades.     

多关节机器人通用体系结构的研究

结合一个五自由度教学工业两用型机器人应用实例，构造出多关节机器人通用体系结构，包括总体原型、机械结构、关节传动链、伺服驱动元件、电气控制系统、关节坐标系及其运动学方程、通信协议和软件设计思路等。通过实际使用表明，本文提出的通用体系结构是实用的、合理的。     

离心泵性能参数的自动测定和自动控制

通过将计算机技术应用于离心泵性能参数的研究，实现了离心泵性能参数的自动测定和自动控制。     

Analysis and tuning of adaptive generalized predictive control

The adaptive Generalized Predictive Controller (Clarke et al., 1987a, b) is capable of controlling plants with variable dead-time, unknown model orders and unstable poles and zeros. This paper shows how the GPC control law can be written in an equivalent general linear transfer function form which simplifies closed-loop (eg. root locus) analysis. Three recommended strategies for selecting the design parameters during the commissioning stage allow the user to adjust the closed-loop speed of response on-line using only a single active tuning parameter. Experimental runs confirm the ability of adaptive GPC to provide a consistent closed-loop response in spite of large process changes.     

DECOUPLER DESIGN AND CONTROL SYSTEM TUNING BY INA FOR DISTILLATION COMPOSITION CONTROL†

Six distillation column models have been used in studies of the usefulness of the Inverse Nyquist Array (INA) method for design of dual composition control for distillation. Five of the column models are experimental, one describing an industrial column, the others four pilot plants. One column model is obtained by modeling from first principles.

The control strategies investigated and compared are multiloop SISO, 2-way decoupling and l-way decoupling. The control variables are the standard ones, i.e. reflux flow and boilup.

In most of the cases INA has been found to be a useful tool for design of the loops and for comparison of the different control approaches. INA has also been found to be useful for simultaneous tuning of the decouplers and the feedback controllers.

For 2-way decoupling the criterion to minimize interaction at the critical frequency for each primary feedback loop has been found useful in most, but not all, cases. The scheme can be designed by pure gains in the decouplers and there is no reason to introduce dynamics into the decouplers—the systems studied are already sufficiently rich in dynamics.

INA has been found to be a suitable vehicle for the choice between the two possible l-way decoupling schemes.

With the design approach taken, l-way decoupling has been found to provide considerably better control quality than 2-way decoupling in two of the six systems, the differences in control quality being small in the other cases.

The effect of model mismatching on the results, caused e.g. by process nonlinearities, is discussed and simple rules to decrease the parameter sensitivity for 2-way decoupling schemes are given. When model mismatching is considered, the advantage of l-way decoupling over 2-way decoupling seems to increase.

One deficiency of the INA design as used in this paper is that it does not single out the design which is to be preferred on the grounds of robustness.     

浅谈一次盐水的工艺指标控制

介绍了一次盐水的各项工艺指标对生产的影响以及稳定控制这些指标的方法，强调了在生产中控制好一次盐水的工艺指标是影响产品质量及离子交换膜使用寿命的关键。