气液交叉流阵列PM2.5热泳和扩散泳拟传质模型

基于气溶胶中PM2.5微细颗粒物拟流体特性，对气液交叉流阵列中PM2.5在气溶胶流体传热传质边界层内热泳和扩散泳运动进行拟传质机理分析，与跟随气体的对流传质相叠加，建立了气液交叉流阵列PM2.5热泳和扩散泳拟传质模型，并进行了实验检验。实验在固定对流条件下，考察了不同气液相温度差导致的热泳、不同气相湿度差导致的扩散泳和颗粒粒径等因素对气液交叉流阵列PM2.5拟传质系数的影响。实验数据统计值与模型表达趋势一致，在初始温差40℃、初始湿度0.118 kg/kg条件下，100排气液交叉流阵列PM2.5拟传质系数模型预测值为3.33×10^-3 m/s、实验值为3.75×10^-3 m/s。     

水平管气液两相弹状流液弹频率的水动力学新模型

The prediction of slug frequency has important significance on gas-liquid two-phase flow. A hydrodynamic model was put forward to evaluate slug frequency for horizontal two-phase flow, based on the dependence of slug frequency on the frequency of unstable interfacial wave. Using air and water, experimental verification of the model was carried out in a large range of flow parameters. Six electrical probes were installed at different positions of a horizontal plexiglass pipe to detect slug frequency development. The pipe is 30 m long and its inner diameter is 24 ram. It is observed experimentally that the interracial wave frequency at the inlet is about i to 3 times the frequency of stable slug. The slug frequencies predicted by the model fit well with Tronconi (1990) model and the experimental data. The combination of the hydrodynamic model and the experimental data results in a conclusion that the frequency of equilibrium liquid slug is approximately half the minimum frequency of interfacial wave.     

黏弹性流体环空内的起动流分析

利用分离变量法得到了Maxwell型黏弹性流体在环空内起动流时的解析解，并对其流动特性进行了计算和分析。结果表明，黏弹性流体在环空内的起动流呈现出周期性的、衰减的振荡流特点，环空内的速度剖面在不同时刻呈现出不同的规律，并且在流体弹性效应较强时，环空内有可能出现暂时的逆流现象。环空内不同位置处的振荡规律是不同的，环空中央附近的振荡强度要强于壁面附近的。流体的弹性效应越强，振荡幅度越大，趋于稳定的时间就越长。随着时间的延续，流体的弹性对速度剖面的影响逐渐减弱。环空间距对振荡流有抑制作用。间距变小，将使振荡流的振幅减小、频率增加，平均速度的稳定值减小。     

微通道内气-液传质研究

以CO₂-H₂O为模型体系，实验考察了当量直径为667 μm的单通道和16个并行通道内的气-液传质行为.实验发现，液体表观速度增加，单通道内液侧体积传质系数明显提高;同一液体表观速度下，液侧体积传质系数随气体表观速度增加而增加;在实验数据基础上关联了液侧体积传质系数与气-液两相流参数间的关系.微通道内的液侧体积传质系数较常规尺度气-液接触设备至少高1～2个数量级.并讨论了并行微通道内气-液两相流分配特性对整体传质性能的影响，表明合理设计气、液流动分布结构，可保证微通道内优异的传质特性.     

Practical validation of the two-fluid model applied to dense gas-solid flows in fluidized beds

This paper discusses the simulation of bubbling gas-solid flows by using the Eulerian two-fluid approach. Predictions of particle motion, bed expansion, bubble size and bubble velocity in bubbling beds containing Geldart B particles are compared with experimental results and correlations found in the literature. In addition, gas mixing in a bed of Geldart A particles is investigated.An in-house code has been developed based on the finite-volume method and the time-splitting approach using a staggered grid arrangement. The velocities in both phases are obtained by solving the 2D Reynolds-averaged Navier/Stokes equations using a partial elimination algorithm (PEA) and a coupled solver. The k-ε turbulence model is used to describe the turbulent quantities in the continuous phase.In general, the model predictions are in good agreement with experimental data found in the literature. Most important observations are: the level of the restitution coefficient was found to be crucial in order to obtain successful results from 2D axisymmetric simulations of a system containing Geldart B particles. Bubble size and bubble rise velocities are not as sensitive to the restitution coefficient. The turbulence model is of outmost importance concerning gas mixing in a fluidized bed of Geldart A particles.From these numerical analyzes an optimized granular flow two-fluid model can be designed for the purpose of simulating reactive systems in fluidized bed reactors.     

A reactive extension of the OpenMusic visual programming language

Objectives: OpenMusic (OM) is a domain-specific visual programming language designed for computer-aided music composition. This language based on Common Lisp allows composers to develop functional processes generating or transforming musical data, and to execute them locally by demand-driven evaluations. As most historical computer-aided composition environments, OM relies on a transformational declarative paradigm, which is hard to conciliate with reactive data-flow (an evaluation scheme more adequate to the development of interactive systems). We propose to link these two evaluation paradigms in the same and consistent visual programming framework.Methods: We establish a denotational semantics of the visual language, which gives account for its demand-driven evaluation mechanism and the incremental construction of programs. We then extend this semantics to enable reactive computations in the functional graphs.Results: The resulting language merges data-driven executions with the existing demand-driven mechanism. A conservative implementation is proposed.Conclusions: We show that the incremental construction of programs and their data-driven and demand-driven evaluations can be smoothly integrated in the visual programming workflow. This integration allows for the propagation of changes in the programs, and the evaluation of graphically designed functional expressions as a response to external events, a first step in bridging the gap between computer-assisted composition environments and real-time musical systems.     

Drawing layered graphs with port constraints

Complex software systems are often modeled using data flow diagrams, in which nodes are connected to each other through dedicated connection points called ports. The influence a layout algorithm has on the placement of ports is determined by port constraints defined on the corresponding node.In this paper we present approaches for integrating port constraints into the layer-based approach to graph drawing pioneered by Sugiyama et al. We show how our layout algorithm, called KLay Layered, progresses from relaxed to more restricted port constraint levels as it executes, and how established algorithms for crossing minimization and edge routing can be extended to support port constraints. Compared to the previous layout algorithms supporting ports, our algorithm produces fewer edge crossings and bends and yields pleasing results.We also explain and evaluate how layout algorithms can be kept simple by using the concept of intermediate processors to structure them in a modular way. A case study integrating our layout algorithm into UC Berkeley's Ptolemy tool illustrates how KLay Layered can be integrated into Java-based applications.     

Controller design for nonlinear systems using the Contoured Robust Controller Bode plot

In this paper, we develop the Contoured Robust Controller Bode (CRCBode) plot and demonstrate its use in the design of robust controllers for nonlinear single‐input single‐output (SISO) systems. The CRCBode plot shows contours (level sets) of a robust performance quantity on the Bode magnitude and phase plots of the controller. An iterative frequency domain loop‐shaping design approach is employed to eliminate all intersections of the controller frequency response with certain ‘forbidden regions,’ indicating that a standard SISO robust stability and performance criterion is satisfied. Nonlinearities are accounted for by avoiding the maximum forbidden regions over a structured uncertainty set consisting of linearizations of the system dynamics about several operating points. We demonstrate this technique by designing and experimentally verifying a flow‐rate controller for a butterfly‐valve based liquid cooling system, which is robust to valve nonlinearities and flow disturbances. Finally, we compare this compensator with one generated using an automated H _∞ synthesis algorithm and discuss the advantages of the CRCBode approach. Copyright © 2013 John Wiley & Sons, Ltd.     

塑料旋转成型的特点与研究

介绍了塑料旋转成型的原理和主要特点，对旋转成型制品中易出现的气泡和弯曲，收缩现象，以及冲击强度低的原因进行了分析研究，相应地提出了减少或消除旋转成型制品中的气泡，减少或消除制品收缩和弯曲，以及提高制品冲击强度的主要途径。     

内翅片管中堵塞芯管直径优化的数值模拟

采用可实现的k-ε湍流模型和壁面函数法对带不同直径堵塞芯管的内翅片管内空气的湍流流动和换热特性进行了数值模拟，利用试验数据检验了计算方法的正确性。在对不同流量下改变芯管直径进行数值模拟的结果表明：在一定流量下，芯管外径与外管内径之比存在着一个最佳值，使单位压降、单位翅片面积下的换热量最大，而且随着流量的增加，最佳芯管外径与外管内径之比呈减小趋势。在本文所研究的参数范围内，这一最佳比值在0.5-0.625之间。同时也对在相同压降条件下进行了数值计算，结果表明，当芯管外径与外管内径最佳比值为0.4-0.56左右时，单位翅片面积下的流量和换热量之积达最大值。这一结论为内翅片管的优化设计提供了重要依据。