有机试剂结构与性质的研究：Ⅻ.有机试剂的pKa与改进的Hammett方程

有机试剂的ｐＫａ是其重要物化参数，是有机试剂酸碱性的度量，直接决定配合物的稳定性。应用改进的Ｈａｍｍｅｔｔ方程处理取代基常数与ｐＫａ的关系，得到满意的结果。     

新型组合工艺对微污染原水中有机污染物和消毒副产物前体物的去除

本采用中试试验装置研究了生物陶粒过滤一微絮凝砂滤一活性炭吸附组合工艺，对微污染原水中有机污染物和消毒副产物前体物的去除效果。在原水UV254为0．047～0．065cm^-1，DOC为2．70～4．10mg／L，TOC为3．50～5．00mg／L的条件下，组合工艺对UV254，DOC、TOC平均去除率分别为98．4％、74．1％、69．2％。色-质联机分析结果表明，经组合工艺处理水中有机物由54种降至25种。组合工艺出水中三卤甲烷总含量不及常规工艺出水中该物质含量的五分之一。组合工艺能有效控制和消除水中有机物的污染，提供安全的优质饮用水。     

Degree of crosslinking and mechanical properties of crosslinked poly(vinyl alcohol) beads for use in solid-phase organic synthesis

The limited swellability in polar media of the commonly used polystyrene/divinylbenzene (PS-DVB) support materials for solid-phase organic synthesis has led to the development of novel, highly swellable hydrophilic gels designed for use in aqueous or polar media. Poly(vinyl alcohol) beads crosslinked with epichlorohydrin (PVA-EP) were prepared by a two-step inverse-suspension polymerization method. While it is known that the morphology of the resulting beads can be controlled by the ratio of EP versus PVA as well as by the pre-crosslinking time, the actual degree of crosslinking of the beads and their mechanical properties remain unknown. It is therefore the purpose of this study to evaluate the actual degree of crosslinking of beads prepared with different quantities of crosslinker in the feed by spectroscopic (Raman, nuclear magnetic resonance) and chemical (functional group loading) methods. The mechanical properties of these swollen PVA-EP beads will be evaluated by single-bead unconfined compression in solvents such as water, N,N-dimethylformamide (DMF), and tetrahydrofuran (THF) and compared to model PS-DVB beads commonly used for solid phase synthesis.     

微波促进有机反应原理及微波有机合成仪

论述了微波促进有机反应的原理和微波加热的特点.对目前使用的家用微波炉和专用微波有机合成仪的性能进行了评价.指出微波促进有机反应需要解决的问题及我国应加强对该领域的研究.     

有机碱对莰烯直接乙酰化的影响

研究了在含氮有机碱存在下的莰烯直接乙酰化反应，结果表明，在反应中加入与莰烯等摩尔的六氢吡啶，有利于莰烯乙酰化反应，在反应液中的酰化产物ω－乙酰基莰烯含量最高达到56％，大大超过异构化产物乙酸异冰片酯。     

优良水消毒剂——ClO2的性质表现

二氧化氯是优良的水消毒剂,是氧化型消毒剂。二氧化氯对水中的一些还原态的金属阳离子、低价硫化物、氰化物、有机物等均有氧化作用。ClO2对无机物氧化以祛毒为主,对有机物的氧化降解以含氧基团的小分子化合物为主,即最终以无毒害作用的产物为主。     

高纯过氧化氢生产中有机物杂质的净化技术进展

介绍了工业级过氧化氢中有机物杂质的来源,综述了高纯过氧化氢生产中有机物杂质的净化技术研究进展,包括精馏、吸附、离子交换树脂、溶剂萃取、结晶、膜分离技术以及这些技术的组合净化技术。精馏净化产品纯度不高,但技术成熟,可工业放大;膜分离净化技术较安全,但膜的寿命短;吸附树脂工艺简单、净化效率高,但树脂易被氧化。指出以精馏为前净化技术,再与膜分离、树脂吸附相结合是有机碳杂质去除技术的发展趋势。     

高分子金属配合物发光材料的制备技术进展

高分子金属配合物发光材料是一类很有价值的功能材料,评述了有关它的各种合成方法。以金属离子与含配位基团的聚合物进行反应,容易在高聚物之间形成交联,难以获得发光强度高的高分子配合物;使金属离子与高分子配体和小分子配体同时作用,可以得到荧光强度比较理想的产物,但反应难以定量控制;以小分子金属配合物单体与某些单体之间进行共聚合反应,也可获得荧光强度较高的高分子配合物,但聚合反应的空间位阻较大;通过两端都含有配位基团的刚性链的有机小分子配体直接与金属离子配合形成高分子金属配合物;以小分子金属配合物单体进行均聚或者将小分子金属配合物接枝到高聚物上也可以形成高分子金属配合物。     

Production of nanoparticles of copper compounds by anodic dissolution of copper in organic solvents

The anodic behaviour of copper was investigated in ethanol solution containing LiClO₄, LiCl electrolyte and water. The type of electrolyte and the water content influences the mechanism of the anodic process and the formation of anodic products. In LiClO₄ electrolyte the dissolution of copper is related to the oxidation of Cu(I) to Cu(II). In solutions of LiCl the etching of copper begins with the creation of soluble complexes of Cu(I) with chloride ions and solvent molecules. At potentials above 0.4 V the formation of alkoxides was observed in both solutions, characterized by a yellow tint. On the other hand, above 0.8 V (i.e. above the equilibrium potential of alcohol oxidation) copper dissolution is accompanied by the formation of a blue colloidal suspension of Cu (II) copper salt. Anodic etching of copper in solutions containing 3% H₂O at potentials higher than 0.4 V leads to the formation of colloidal suspension of copper oxide nanoparticles.