计算机配色技术应用于木材染色初探

介绍了计算机测色配色系统的原理,研究了建立木材染色基础数据库的方法,提出了注意事项,并分析了自动配色过程中产生色差的原因及解决方法。     

B4 用染色法记录液体中大功率超声场的分布

利用染料在纸上染色可以方便，快速地记录液体中大功率超声场的分布，本文给出这一套验研究的结果，表明该方法在声化学和超声清洗等大功率超声液体处理应用中，对于测量空化强度的空间分布是一种实用，可取的方法。     

有机硅丙烯酸酯增深剂的制备及应用

由乙烯基三乙氧基硅烷与KH-550、丙烯酸酯类单体在阴/非离子表面活性剂存在下，通过乳液聚合制得带蓝光的半透明有机硅丙烯酸酯乳液．该乳液粘度小，有机硅质量分数15％，总固体质量分数30％，该增深剂既可单独使用，也可与氨基硅油乳液复配，经蓝色16电力纺、黑色03双绉等真丝产品增深，其增深度可达15％，但亲水性有所下降．     

Dyestuff—fibre interactions

The strength and nature of dye–fibre interactions vary according to fibre type and dye type. In the case of acid dyes for polyamide fibres, cationic dyes for acrylic fibres, disperse dyes for hydrophobic fibres, and direct dyes for cellulosic fibres, these interactions may be classified as non-covalent, a classification which includes van der Waals (VDW), electrostatic, induction, solvophobic and charge-transfer interactions.
Reactive dyes are a notable exception to the above, since the interaction which is responsible for their excellent wet fastness is the dye–fibre covalent bond, however, these dyes are increasingly viewed as environmentally unfriendly due to high salt usage and residual unfixed colour. This situation may be improved by either incorporating amine sites in the cellulose or by reversing the system to incorporate reactive residues in the fibre and nucleophilic sites in the dye.
Nonionic disperse dyes are valuable for hydrophobic fibres such as polyester but have made little impact on hydrophilic fibres such as silk, wool and cotton. Experiments to develop simple treatments to render the latter fibres disperse dyeable are described and the combined role of solvophobic and – interactions discussed.     

中性固色剂NF在分散／活性一浴热溶染色中的应用

本文对涤棉混纺织物在分散/活性染料同浴染色中采用碱固工艺与中性固色工艺作了较详细的对比试验,同时对中性固色剂及双氰胺的用量进行了优选组合,并对中性固色剂的效果进行了讨论。     

Gouda Cheese with Modified Content of β-Casein as a Source of Peptides with ACE- and DPP-IV-Inhibiting Bioactivity: A Study Based on In Silico and In Vitro Protocol

In silico and in vitro methods were used to analyze ACE- and DPP-IV-inhibiting potential of Gouda cheese with a modified content of β-casein. Firstly, the BIOPEP-UWM database was used to predict the presence of ACE and DPP-IV inhibitors in casein sequences. Then, the following Gouda cheeses were produced: with decreased, increased, and normative content of β-casein after 1 and 60 days of ripening each (six variants in total). Finally, determination of the ACE/DPP-IV-inhibitory activity and the identification of peptides in respective Gouda-derived water-soluble extracts were carried out. The identification analyses were supported with in silico calculations, i.e., heatmaps and quantitative parameters. All Gouda variants exhibited comparable ACE inhibition, whereas DPP-IV inhibition was more diversified among the samples. The samples derived from Gouda with the increased content of β-casein (both stages of ripening) had the highest DPP-IV-inhibiting potency compared to the same samples measured for ACE inhibition. Regardless of the results concerning ACE and DPP-IV inhibition among the cheese samples, the heatmap showed that the latter bioactivity was predominant in all Gouda variants, presumably because it was based on the qualitative approach (i.e., peptide presence in the sample). Our heatmap did not include the bioactivity of a single peptide as well as its quantity in the sample. In turn, the quantitative parameters showed that the best sources of ACE/DPP-IV inhibitors were all Gouda-derived extracts obtained after 60 days of the ripening. Although our protocol was efficient in showing some regularities among Gouda cheese variants, in vivo studies are recommended for more extensive investigations of this subject.     

水滑石材料处理工业废水的研究进展

工业废水主要由工业生产过程中产生的污水和废液组成,具有成分复杂、种类繁多、差异性大、难以处理等特点。主要综述了水滑石常用的制备方法,利用壳聚糖法、等离子体法、农业废弃物法进行改性制备复合材料。水滑石材料在吸附过程中多呈粉末状,难以回收,且工业化应用较少。针对以上问题,可采用引入Fe离子产生磁性,利于回收;通过开发更低廉的合成材料、简单快捷的制备方法、稳定的理化性质使水滑石材料得以工业化应用。水滑石复合材料在层板中引入磁性物质有助于回收,随着水滑石技术的深入研究和新工艺的发展,处理有毒污染物的前景必定会更广阔。     

多元羧酸与指甲醌染料交联染棉的结构及性能

为了提高天然染料对棉纤维的染色固色性能,以聚马来酸（PMA）和柠檬酸（CA）为交联剂应用于天然染料指甲醌对棉织物的交联染色。采用FTIR、SEM和XRD分析了染色前后棉织物的表面形态及结构,探讨了酯交联对棉织物性能的影响以及多元羧酸复配交联染色机理。结果表明,染色前后棉织物表面差别不大,各纤维间不粘连;直接染色后的棉纤维表面变化不明显,仅有少量染料附着,而交联染色后的棉纤维表面负载较多的染料导致其粗糙度增加,酯化反应主要发生在纤维的非晶态区。与直接染色棉织物相比,交联染色棉织物的染色深度（K/S）和上染率分别提高了88%和38%;染品的绿光、黄光增加,颜色饱和度提高;摩擦色牢度提高了1~2级;耐洗色牢度提高了1~2级;交联染色后棉织物的折皱回复角（WRA）提高了约60%,UPF值达到了50+,具有优异的抗紫外性能。     

不同分散染料微胶囊的制备及应用

采用原位聚合法进行双层造壁，对不同结构的分散染料进行胶囊化。将分散染料高速均化后，在pH=4～6时加入TMM，65℃保温1．5小时，再滴加一定量PEHMM，在75℃时保温2.5小时进行双层造壁、C.I.分散橙30染料胶囊的粒径平均值为13．53μm，中值8．732μm；C.I．分散蓝56微胶囊粒径平均值为36.3μm，中值24.87μm。胶囊染色结果显示：这两只染料性能优于传统染料，染色后其废液的吸光度分别为0.021和0.003，比传统染色废水的1.286和0.786低很多。     

天然高分子改性制两性絮凝剂及其性能研究

以天然植物胶粉F691为原料,通过羧甲基化、接枝共聚和曼尼奇(Mannich)三步反应合成出改性两性型絮凝剂(CG-AC),确定了其较佳的制备条件.试验表明:20 mg/L CG-AC与100 mg/L PAC配合使用处理活性红模拟染料废水,脱色率可达68%,效果明显优于对比样PAM-C;CG-AC对造纸混合污泥的絮凝脱水性能优于对比样PHP和PAM-C.