Flammability ranking of foliage species by factor analysis of physical and chemical pyric properties

In this paper, factor analysis is introduced to evaluate the flammability of 55 foliage species that may be used in China for construction of the fuel break network of forest strips with lower flammability. Six pyric parameters, i.e. air dry moisture content, absolute dry moisture content, ignition point, ash content, caloric value and extractive content, are measured and used as variables for factor analysis. The covariance analysis shows that four principal factors can be extracted to reflect the flammability in different physical and chemical senses. In terms of the contributions of the four factors to the variances and the physical significance of the relevant parameters, the four factors are, respectively, termed as ‘flaming factor,’ ‘air dry factor,’ ‘ash factor’ and ‘absolute dry factor.’ The stability of the factor analysis method is examined by a different number of samples considered, and the variation degrees of the orderings indicate that the method has high reliability to measure the total flammability of foliage species. The results of the flammability evaluation are verified by comparison with the recommended tree species in the Chinese technology standard. Copyright © 2008 John Wiley & Sons, Ltd.     

Reconstruction of reflectance spectra using weighted principal component analysis

The weighted principal component analysis technique is employed for reconstruction of reflectance spectra of surface colors from the related tristimulus values. A dynamic eigenvector subspace based on applying certain weights to reflectance data of Munsell color chips has been formed for each particular sample and the color difference value between the target, and Munsell dataset is chosen as a criterion for determination of weighting factors. Implementation of this method enables one to increase the influence of samples which are closer to target on extracted principal eigenvectors and subsequently diminish the effect of those samples which benefit from higher amount of color difference. The performance of the suggested method is evaluated in spectral reflectance reconstruction of three different collections of colored samples by the use of the first three Munsell bases. The resulting spectra show considerable improvements in terms of root mean square error between the actual and reconstructed reflectance curves as well as CIELAB color difference under illuminant A in comparison to those obtained from the standard PCA method. © 2008 Wiley Periodicals, Inc. Col Res Appl, 33, 360–371, 2008     

Accelerator Analysis of Tributyltin Adsorbed onto the Surface of a Tributyltin Resistant Marine Pseudoalteromonas sp. Cell

Tributyltin (TBT) released into seawater from ship hulls is a stable marine pollutant and obviously remains in marine environments. We isolated a TBT resistant marine Pseudoalteromonas sp. TBT1 from sediment of a ship’s ballast water. The isolate (10^{9.3 ± 0.2} colony-forming units mL⁻¹) adsorbed TBT in proportion to the concentrations of TBTCl externally added up to 3 mM, where the number of TBT adsorbed by a single cell was estimated to be 10^8.2. The value was reduced to about one-fifth when the lysozyme-treated cells were used. The surface of ethanol treated cells became rough, but the capacity of TBT adsorption was the same as that for native cells. These results indicate that the function of the cell surface, rather than that structure, plays an important role to the adsorption of TBT. The adsorption state of TBT seems to be multi-layer when the number of more than 10^6.8 TBT molecules is adsorbed by a single cell.     

高水头弧形闸门伸缩式水封的黏弹性仿真计算方法

认为止水材料的蠕变和应力松弛是由于材料参数的变化而引起的，把描述橡胶类材料应变能密度函数中的物理参数假设成与时间有关的黏弹性函数。在此基础上改进材料应力张量与应变张量的关系式，得到了改进的Mooney-Rivlin公式，给出了一种考虑止水材料黏弹性性质的伸缩式水封仿真计算方法。分析得出，止水材料由于受周边结构的限制，材料黏弹性阶段除顶点垂直位移不变，关键结点的其它位移并没有因材料的蠕变而显著变化，材料的蠕变有提高封头顶点接触应力的趋势，不会降低水封的水密性。通过工程实例，给出了140m水头下、封头与面板间隙控制在30mm内的可行并较优的伸缩式水封的断面。     

基于网点形状与平版印刷关系的研究

通过研究网点的作用和基本参数，以及网点形状与平版印刷的关系，对比了2种常用网点形状（正方形网点和圆形网点）的印刷特性，从而说明不同的网点形状会产生不同的复制效果。     

Automatic coding of dialogue acts in collaboration protocols

Although protocol analysis can be an important tool for researchers to investigate the process of collaboration and communication, the use of this method of analysis can be time consuming. Hence, an automatic coding procedure for coding dialogue acts was developed. This procedure helps to determine the communicative function of messages in online discussions by recognizing discourse markers and cue phrases in the utterances. Five main communicative functions are distinguished: argumentative, responsive, informative, elicitative, and imperative. A total of 29 different dialogue acts are specified and recognized automatically in collaboration protocols. The reliability of the automatic coding procedure was determined by comparing automatically coded dialogue acts to hand-coded dialogue acts by a human rater. The validity of the automatic coding procedure was examined using three different types of analyses. First, an examination of group differences was used (dialogue acts used by female versus male students). Ideally, the coding procedure should be able to distinguish between groups who are likely to communicate differently. Second, to examine the validity of the automatic coding procedure through examination of experimental intervention, the results of the automatic coding procedure of students, with access to a tool that visualizes the degree of participation of each student, were compared to students who did not have access to this tool. Finally, the validity of the automatic coding procedure of dialogue acts was examined using correlation analyses. Results of the automatic coding procedure of dialogue acts of utterances (form) were related to results of a manual coding procedure of the collaborative activities to which the utterances refer (content). The analyses presented in this paper indicate promising results concerning the reliability and validity of the automatic coding procedure for dialogue acts. However, limitations of the procedure were also found and discussed.     

滩海海底管线悬空问题治理对策

根据埕岛油田浅海滩涂地带海底管线的安全评估报告,对目前影响海底管线安全的悬空问题进行分析和讨论,并针对其产生悬空的原因提出治理的对策和方法。重点介绍了水下支撑固定法。     

EASY2000色谱处理系统在酒样色谱分析中的运用

介绍了EASY2000色谱处理系统在酒类产品分析实际应用过程中的方法，步骤，特点及注意事项等。     

Numerical characterization of a microscale solid-oxide fuel cell

In this study, a single unit of planar micro-solid-oxide fuel cell (μSOFC) is investigated numerically to evaluate the influences of flow channel design, oxygen composition, and thermal operating conditions on cell performance. Four flow channel designs are examined under the co-flow configuration: serpentine, double serpentine, rod bundle, and oblique rib. For all designs, the contacts areas of interconnect to electrodes are kept consistent to maintain the ohmic losses at the same level. To characterize the mass transport effects, there are three different compositions, 100% O₂, 50% O₂/50% N₂ and air, fed to the cathode inlet. Different thermal conditions, adiabatic and isothermal, are applied to the outer boundary of the μSOFC and the results are compared. The outcomes suggest that both thermal conditions and oxidant composition show remarkable influences on μSOFC performance. Under adiabatic conditions, the rise of cell temperature causes a decrease in reversible voltage, deteriorating the overall cell competence. When oxygen is diluted with nitrogen, local gas diffusion becomes dominant to the cathode reaction. Bulk flow, on the other hand, plays a minor role in cell performance since there is little deviation in the polarization curves for all flow channel designs, even at high current densities. For comparison, the flow visualization technique is employed to observe the transport phenomena in various flow channel designs. The flow patterns are found to resemble the concentration distribution, providing a useful tool to design μSOFCs.     

Behavior and movements of Indian meal moths (Plodia interpunctella Hübner) during commodity infestation

A model warehouse with carefully regulated environmental conditions was used to study the behavior of adult Indian meal moths during commodity infestation. Sequences of moth distributions in the warehouse, calculated by spatial analysis, clearly showed the coordinated movements of moth populations from eclosion to death. Many facets of adult behavior in a warehouse were coordinated with the photoperiod. Adult moths emerged at the end of a photophase and fairly rapidly moved to the walls and, to a lesser extent, to the undersides of the commodity pallets. Most females are mated in the first 24 h after emergence, largely during the scotophase. Air circulation within the warehouse probably compromised pheromone-directed guidance of males to females, although pheromones may still have a major role in regulating other aspects of male mating behavior. When mating subsided, many of the males flew upwind to the air circulating unit, but only during the photophases. The females moved to the return air side of the warehouse and then migrated towards the same end as the males, but only during the scotophases. They moved from pallet to pallet largely by walking on the warehouse floor and laid eggs in or on the cups of commodity. Direct oviposition on the commodity during the infestation period was lower than expected, probably because commodity odors were dissipated by air circulation and did not provide appropriate orientation. At 144 h after emergence, 90% of the moth population had died.