低渗透油田套管损坏机理分析及防治措施

在注水开发油田,油水井套管损坏是一种极为普遍的现象,但又各具特点.通过对鄯善油田套管损坏井的自身特点进行统计、归纳,深入分析低渗透砂岩油藏套管变形影响因素和作用机理,提出了套管损坏井的预防及相应治理措施.     

Slip and Twinning in Polycrystalline Alumina (α-Al2O3) Deformed under Hydrostatic Pressure between 600° and 1000°C

The microstructure of polycrystalline alumina deformed under hydrostatic pressure and at low temperature is investigated by transmission electron microscopy. Deformation occurs mainly by prism plane slip and rhombohedral twinning. Introduction of hydrogen leads to a significant decrease in the yield stress. In large grain size alumina deformed with hydrogen, accommodation of twinning involves dislocation reactions in the twin boundary and in the grains rather than by cracking. Prism plane dislocations decompose into basal dislocations by cross slip probably due to a decrease of Peierls stress for basal slip in the presence of hydrogen.     

三峡工程升船机坝段基础特点与施工期形变特征

简要分析了升船机上闸首基础岩体的特点，在施工期随上部建筑物形成的过程中沉降与水平形变随荷载变化的特征。分析认为:基础岩体形变与其受荷特点相吻合，目前建筑物总体安全状态正常，但部分坝段需引起注意，同时为验证设计、指导施工提供了依据。     

海水冻融后轻骨料混凝土的双轴压压强度和变形性能

针对我国渤海湾北部海域轻骨料混凝土结构的工作环境和受力状态，进行了海水中不同冻融循环次数后轻骨料混凝土的双轴压压强度试验，考察了试件的破坏形态和表面裂缝的走向特征。根据试验结果，分析了极限抗压强度随冻融循环次数和应力比的变化规律，并在此基础上建立了考虑海水冻融影响的双轴压压强度准则。探讨了冻融循环作用后轻骨料混凝土的双轴压压变形性能，包括峰值应变、应力-应变关系随冻融循环次数和应力比的变化规律。研究结果说明，随冻融循环次数的增加各种应力比下的应力-应变关系曲线均逐渐扁平，峰值应力点明显下降并右移，说明混凝土的极限抗压强度逐渐降低。     

Solution of large deformation contact problems with friction between Blatz-Ko hyperelastic bodies

The present paper is devoted to the analysis of the contact problems with Coulomb friction and large deformation between two hyperelastic bodies. One approach to separate the material nonlinearity and contact nonlinearity is presented. The total Lagrangian formulation is adopted to describe the geometrically nonlinear behavior. Nondifferentiable contact potentials are regularized by means of the augmented Lagrangian method. Numerical examples are carried out in two cases: rigid-deformable contact and deformable-deformable contact with large slips. The numerical results prove that the proposed approach is robust and efficient concerning numerical stability.     

A study of the large strain deformation and failure behaviour of mixed biopolymer gels via in situ ESEM

A mixed biopolymer gel, consisting of a protein (gelatin) and polysaccharide (maltodextrin) mixture has been investigated. By controlling the composition it was possible to construct an ‘emulsion-like’ structure, with included spherical particles of one phase (maltodextrin) within a continuous matrix of the second (gelatin). Large strain deformation and failure behaviour of this system has been examined via in situ environmental scanning electron microscopy (ESEM). ESEM has been employed to explore the changes in the structure of the material, whilst allowing the sample to stay hydrated as it was subjected to tensile strain, thereby allowing simultaneous imaging and determination of stress-strain data of the native sample. Ductile behaviour was observed, which has been attributed to the stretching, tearing and fracture of gelatin ligaments and debonding at the interface between the maltodextrin particles and continuous gelatin matrix. Deformation and fracture of the maltodextrin particles during tensile testing was also observed. The interfacial fracture energy of the composite has been calculated following an elastomer composite-debonding model, although there are several limitations to this approach for the mixed gel. It was found in samples tested after different ageing times that the debonding stress and strain was decreasing with ageing leading to a lower interfacial fracture energy. Samples were also tested after successive loading cycles, which resulted in a mechanical strength decrease after each cycle.     

Plastic deformation of bcc metal thin foils without dislocation

Heavy plastic deformation of fcc metal thin foils to fracture has been found recently to proceed without involving dislocations, and it results in the formation of high density of vacancy clusters. Thin foil specimens of bcc metals such as V and Mo were plastically deformed to fracture in in situ elongation experiments under an electron microscope. Morphology of thinning and fracture was found to be similar to fcc metals, and no dislocation was observed during heavy deformation. Electron diffraction analysis at the tip of a crack during deformation confirmed a large elastic deformation of up to 5%. Unlike in fcc metal thin foil specimens, point defect clusters were not observed near fractured tips. This difference is attributed to the difference in vacancy reaction, though the deformation in bcc metals without dislocation most likely does produce vacancies.     

结构-波浪-海床耦合系统中大圆筒结构的波压力响应

以沉入式大圆筒结构为对象，通过设计随机波浪水槽实验，测取了在单筒和连续筒两种结构型式、两种沉入深度和两种波谱输入下结构表面的动波压力分布。波面高度以及波压力历程均在领域进行分析。通过计算结构表面沿高程和沿环向的波压力谱及波压力传递函数，将单筒实测结果与基于线性绕射理论的解析解进行了比较，同时也详细对比了两种结构型式下的实测结果。文中汇报了在研究中获得的新发现及进行的相应分析，特别是在结构——波浪——海床动力相互作用下对波压力响应机理以及针对连续筒的研究，可为工程应用提供有价值的参考。     

A NEW LARGE CAVITATION CHANNEL IN CHINA SHIP SCIENTIFIC RESEARCH CENTER

1 .　INTRODUCTIONIntherecentdecades ,itisrealizedthatitisquitenecessarytocarryouttestsathighReynoldsnumberwithalowbackgroundnoiselevelinordertomeetmoreandmoreurgentneedsofmodernnavyandmaritimeindustry .Anewlargecavita tionchannelisdevelopedinCSSRCfortestingcompletehull/ propulsor/appendagesarrange ments[1] .Itrepresentsoneofthelatestintechno logicallyadvancedlargecavitationtestfacilities.Inthefollowingsections ,thefeaturesandthefirsttestresultsofthechannelwillbedescribed .2 .　DICRIP…