Wrapping effect of secondary phases on the grains: increased corrosion resistance of Mg–Al alloys

The discrete secondary phases usually cause severe galvanic corrosion, thereby resulting in rapid degradation for Mg–Al alloys in orthopaedics application. In this study, CaO was introduced into Mg–Al–Zn (AZ61) alloy via selective laser melting (SLM) to ameliorate the characterisations of the secondary phases, with an aim to improve its corrosion behaviour. Results revealed that CaO reacted with Mg and Al in Mg–Al alloys during SLM, suppressing the formation of coarse Mg₁₇Al₁₂ phase and promoting the formation of (Mg, Al)₂Ca phase. Meanwhile, the rapid solidification during SLM promoted the homogeneous precipitation of the second phase. As a result, inert (Mg, Al)₂Ca phase homogeneously wrapped the Mg grains, which effectively protected them from the invasion of corrosion solution. Thus, the degradation rate was remarkably reduced from 0.073 to 0.031?mg?cm^–2?h^–1. Furthermore, AZ61-9CaO exhibited good cytocompatibility. This work suggested that AZ61-9CaO was promising candidates for orthopaedics implants.     

不完全观测数据下混合效应模型的正交投影估计

基于矩阵的QR分解技术,对一类含有不完全观测数据的线性混合效应模型提出了一种基于正交投影的估计方法。在一些正则条件下,证明了固定效应参数的估计渐近服从标准正态分布,得到了固定效应参数的置信区间。另外,所提出的固定效应参数的估计过程不受随机效应的任何影响,具有较好的有效性和稳健性。最后,通过一些数值模拟和一个实例分析研究了所提出估计方法的有限样本性质。     

Studies on microbridges of superconducting YBCO thin film

Critical current densities of the superconducting Y-Ba-Cu-O (YBCO) films have been observed to decrease with the increase of power of microwave radiation. Presence of Josephson type of junctions in the microbridges has been established from the microwave irradiation and magnetic field studies. BCS energy gap parameter (2/kT _c ) has been calculated from thedI/dV characteristics and found to be 3.7 at 13 K.     

Modified criterion for global asymptotic stability of fixed-point state-space digital filters using two’s complement arithmetic

A criterion for the global asymptotic stability of fixed-point state-space digital filters using two’s complement arithmetic is presented. The criterion is a modified form of a well-known criterion due to Mills, Mullis, and Roberts. The criterion is in the form of linear matrix inequality and, hence, computationally tractable. An example shows the effectiveness of the modified criterion.     

Delay‐dependent LMI condition for global asymptotic stability of discrete‐time uncertain state‐delayed systems using quantization/overflow nonlinearities

A delay‐dependent criterion for the global asymptotic stability of a class of uncertain discrete‐time state‐delayed systems using various combinations of quantization and overflow nonlinearities is presented. The proposed criterion is in the form of a linear matrix inequality and, hence, computationally tractable. A numerical example highlighting the usefulness of the proposed criterion is given. Copyright © 2010 John Wiley & Sons, Ltd.     

Static pull-in analysis of microcantilevers based on the modified couple stress theory

This paper investigates the deflection and static pull-in voltage of microcantilevers based on the modified couple stress theory, a non-classic continuum theory capable to predict the size effects for structures in micron and sub-micron scales. It is shown that the couple stress theory can remove the gap between the experimental observations and the classical theory based simulations for the static pull-in voltage.     

Temperature sensor based on the Er green upconverted emission in a fluorotellurite glass

The temperature dependence of the green upconverted emission from the two thermally coupled ²H_11/2 and ⁴S_3/2 levels of the Er³⁺ ion in a fluorotellurite glass has been analyzed as a function of the optically active ion concentration in order to check its availability as a temperature sensor. The infrared-to-green upconverted emission have been observed by the naked eyes after a cw laser diode excitation at 800 nm. The fluorescence intensity ratio between the thermally coupled emitting levels as well as the temperature sensitivity has been experimentally obtained up to 540 K. A better behaviour as a temperature sensor has been obtained for the less Er³⁺ concentrated glass with a maximum sensitivity of 54 × 10⁻⁴ K⁻¹ at 540 K, one of the highest found in rare-earth doped transparent materials.     

Failure mode and effects analysis using a group-based evidential reasoning approach

Failure mode and effects analysis (FMEA) is a methodology to evaluate a system, design, process or service for possible ways in which failures (problems, errors, risks and concerns) can occur. It is a group decision function and cannot be done on an individual basis. The FMEA team often demonstrates different opinions and knowledge from one team member to another and produces different types of assessment information such as complete and incomplete, precise and imprecise and known and unknown because of its cross-functional and multidisciplinary nature. These different types of information are very difficult to incorporate into the FMEA by the traditional risk priority number (RPN) model and fuzzy rule-based approximate reasoning methodologies. In this paper we present an FMEA using the evidential reasoning (ER) approach, a newly developed methodology for multiple attribute decision analysis. The proposed FMEA is then illustrated with an application to a fishing vessel. As is illustrated by the numerical example, the proposed FMEA can well capture FMEA team members’ diversity opinions and prioritize failure modes under different types of uncertainties.     

First-principles calculation of L10 -disorder phase equilibria for Fe–Ni system

By combining Cluster Variation Method with FLAPW electronic structure total energy calculations and the Debye–Grüneisen theory within quasi-harmonic approximation, L1₀-disorder phase equilibria for Fe–Ni system are calculated. The transition temperature, 483 K, determined in the present calculation is lower than that obtained in the previous calculation without thermal vibration effects. The decrease of the transition temperature is ascribed to the enhanced phase stability of a disordered phase due to the thermal softening of a lattice.     

A retunable PID multi-rate controller for a networked control system

This paper introduces a control strategy based on retuning a multi-rate PID controller in accordance with the variable delays detected in a networked control system, in order to avoid a decreased control performance. The basic idea is minimising the first-order Taylor terms of a performance measure via gain scheduling, i.e., making the controller gains delay dependent. As network delay is time-variant, the stability of this control approach will be proved by means of linear matrix inequalities.