乐果合成釜故障分析及处理

通过增加底轴承来改变搅拌轴的临界转速,解决了乐果合成釜试车过程中震动较大的问题,达到了生产和工艺要求。     

聚合物合成及成型加工中协同学的应用

综述了协同学在聚合物领域的最新研究进展，介绍了加工制备一些聚合物合成及复合材料所显示出的协同效应，以及用协同学方法定量求解一类合成反应体系的动力学模型。提出通过改变振动力场等作用方式，在聚合物动态塑化成型加工时，协同学方法具有广阔的应用前景。     

凝结水再循环管道振动原因及减振措施

对比了福建省内某电厂一期、二期工程600 MW发电机组凝结水再循环管道的设计和布置,经过分析,得出了一期管道振动的原因。在二期设计中做出了一些改进,基本解决了凝结水再循环管道的振动问题。     

Polyamidoamine dendrimers as curing agents: The optimum polyamidoamine concentration selected by dynamic torsional vibration method and thermogravimetric analyses

Polyamidoamine (PAMAM) dendrimers were investigated as curing agents in bisphenol A epoxy resin systems. The cure behavior of epoxy resin/PAMAM at varying components was investigated by a dynamic torsional vibration method (DTVM); the thermal behavior of the materials was characterized by means of thermogravimetric (TGA) analyses. The DTVM results show that 10/100 parts of the resin (phr) PAMAM was the optimum concentration for 1.0, 3.0, and 5.0 G PAMAM dendrimers/resin systems in our experiment. Also, the TGA results agreed with the conclusions made by the DTVM. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1430–1434, 2007     

基于MEMS声传感器的圆柱壳体振动陀螺振型检测技术

振动陀螺谐振子振型一般采用激光进行非接触式测量,这种方法存在设备成本高、操作复杂、效率低等问题,因此,提出了一种基于MEMS声传感器的圆柱壳体振动陀螺谐振子振型测试方法。该方法利用体积小,指向性高的MEMS声传感器对谐振子振动声场进行高分辨率测量,获得精确的谐振子振动分布情况,建立了谐振子声波测试实验系统,进行了测试实验,并与激光测振仪的测量结果进行比对。实验结果表明,该测试系统具有较高的振型测量精度。这种测试方法成本低,操作简便,测量精度高,可以实现谐振子振型的高精度快速测量,为后续的谐振子修形及陀螺控制提供重要基础。     

Effect of vibration on eye,head and helmet movements while wearing a helmet‐mounted display

Previous research has demonstrated a loss of helmet‐mounted display (HMD) legibility for users exposed to whole body vibration. A pair of human factors studies was conducted to evaluate the effect of whole body vibration on eye, head, and helmet movements for seated users of a HMD while conducting simple fixation and smooth pursuit tracking tasks. These experiments confirmed that vertical eye motion can be demonstrated, that is consistent with the human visual systems' response to the vestibular–ocular reflex (VOR). Helmet slippage was also shown to occur, which could exacerbate loss of display legibility. The largest amplitudes in eye movements were observed during exposure to sinusoidal vibration in the 4–6 Hz range, which is consistent with the frequencies that past research has associated with whole‐body resonance and the largest decrease in display legibility. Further, the measured eye movements appeared to be correlated with both the angular acceleration of the user's head and the angular slippage of the user's helmet. This research demonstrates that the loss of legibility while wearing HMDs likely results from a combination of VOR‐triggered eye movements and movement of the display. Future compensation algorithms should consider adjusting the display in response to both VOR‐triggered eye and HMD motion.     

利用震动磨超细粉碎天然羟基磷灰石

本文利用震动磨对羟基磷灰石进行超细粉碎,优选出震动磨超细粉碎的最佳工艺条件。利用震动磨研磨可以得到粒度分布单一的粉体样品,D50为2.001μm。     

上海东方体育中心综合体育馆屋盖结构风振分析

在屋盖同步风洞试验测量的基础上,采用CQC法对上海东方体育中心综合体育馆大跨屋盖进行了较为准确的空间风振分析。分析了多个复杂空间振型对有代表性节点的动位移根方差的影响,得到本体育馆的最大参振振型为30阶;考虑了两种荷载组合工况,比较了工况1、工况2和自重作用下屋盖结构的节点位移和基底反力,工况1作用下的节点位移和基底反力最大,工况2作用下的相应结果最小;最后给出了5个不利风向下的位移风振系数,可供参考。     

K8型单层球面网壳支座减震

为了对跨度为60 m的K8型单层球面网壳进行了减震分析,分别将结构的支座设置成弹性支座和弹性阻尼支座,对结构进行减震控制.结合对结构在有控和无控状态下自振特性的分析,阐述了单层球面网壳结构的减震控制原理.在常遇地震作用下,得到网壳结构的最大水平位移、减震支座的最大水平位移、最大支座反力和最大杆件内力.通过改变支座的刚度和阻尼系数,对两种减震方案的减震效果进行比较.研究结果表明:两种减震装置均有效地控制了K8型单层球面网壳结构的支座反力,弹性阻尼支座还可以明显地降低减震支座的水平位移.