四坐标数控加工原理及算法研究

本文对四坐标数控加工原理和算法作了详细介绍，尤其对四坐标加工的刀轴矢量算法进行了研究，提出了用垂直于回转轴的平面与刀具运动方向和前导角形成的圆锥面求交，生成刀轴矢量的方法，该方法具有立意新颖、思路清晰，性能可靠，易于在微机上实现等特点，对复杂曲面零件的加工编程，具有重要的实用价值。     

葛洲坝电站2号水轮机转轮室中环修复

针对葛洲坝电站2号机组运行中出现转轮室中环损坏的现象,设计制造出转轮室现场机加工的大型专用机床,在修复改造过程中,解决了一系列技术难题,改造后技术指标均达到理想水平,为电站机组现场修复技术积累了宝贵经验.     

三峡电站水轮机转轮叶片的加工

对三峡电站水轮机转轮叶片的数控加工工艺进行了详细的描述，主要有：（1）巨型叶片测量立式划线平台的设计；（2）网格状无底板式新型铣胎的研制；（3）叶片加工过程中变形的控制；（4）分片加工程序的编制；（5）各种加工参数的确定。在实际中应用效果很好，可以在其他机组叶片加工中推广应用。     

Synthesis of nanophase tungsten carbide by electrical discharge machining

Tungsten carbide nanopowders were synthesized successfully by electric discharge machining followed by annealing under a nitrogen atmosphere. The tungsten workpieces were initially melted and evaporated on the working surface during the electric discharge machining process, and then the tungsten powders were reacted with the carbon electrode and the working medium of kerosene to form the nanocrystalline WC_1−x powders. The powders produced were characterized by XRD, SEM, and TEM. When annealing the powders under an N₂ atmosphere, the cubic phases of WC_1−x gradually changed to hexagonal W₂C and then were transformed fully to nanocrystalline hexagonal WC at 1200 °C, with the nanocrystalline tungsten carbide encapsulated in a carbon shell. On the other hand, under an H₂ atmosphere, the WC_1−x phase changed via a W₂C phase to reduced powders of pure tungsten at 1000 °C or were reduced directly from WC_1−x to elemental W.     

A CLASS OF BAND-LIMITED CHIP WAVEFORMS FOR DS-CDMA SYSTEMS

In Direct Sequence Code Division Multiple Access （DS-CDMA） systems, the chip waveform affects the implementation, system bandwidth, envelope uniformity, eye pattern and Multiple user Access Interference （MAI）. In this paper, based on an elementary density function of a second order polynomial, a class of second order continuity pulses is proposed. From this class of pulses, we can find some members having faster decaying rate, bigger eye opening, more uniform envelope and stronger anti-MAI capability than the Nyquist waveform. The normalized-bandwidth-pulseshape-factor product, the decaying rate of the tail of the time waveform, the opening of the eye diagram, and the envelope uniformity of the second order continuity pulses are addressed in the paper that provide the basic information for the selection of the chip pulse for CDMA systems.     

一种新型模具加工及装配工艺方法

通过对多种模具装配方式进行对比,提出了一种新型的模具加工及装配方法,在实际生产中取得了很好的效果。     

VHF-PECVD制备微晶硅材料的均匀性及其结构特性的分析

采用VHF-PECVD技术在多功能系统(cluster tool)中制备了系列硅薄膜，研究薄膜的均匀性及电学特性和结构特性。结果表明：气压和功率的合理匹配对薄膜的均匀性有很大的影响；材料的喇曼测试和电学测试结果表明微晶硅薄膜存在着纵向的结构不均匀，在将材料应用于器件上时，必须要考虑优化合适的工艺条件；硅烷浓度大，相应制备薄膜的晶化程度减弱，即薄膜中非晶成分增多。     

20Cr_（2）Ni_（4）W钢钴粉涂层激光合金化的试验研究

本文采用２ｋＷＣＯ_２激光器对２０Ｃｒ_（２）Ｎｉ_（４）Ｗ钢进行了激光表面钴合金化的试验研究。用光学显微镜、扫描电镜、电子探针、Ｘ射线衍射、透射电镜、显微硬度计等手段分析了合金化区域的成分、组织和性能。结果表明，激光表面钴合金化可获得含钴均匀的合金化层，合金化层的高温硬度和热疲劳性能均有提高，在热作工具钢表面性能优化领域有着良好的应用前景。     

真空吸附在薄型铝材零件加工中的应用

公司新产品试制过程中有一批导烟板系列零件,外形纤薄且为铝合金材料,无法完全使用传统夹具装夹或磁性吸附方式固定零件来完成零件数控成形加工。我们通过真空吸附装夹加工的应用,最终完成了零件试制加工任务。该套真空吸附加工方案的应用,为其他薄型铝材零件装夹加工提供了有益的借鉴。     

Roll‐to‐roll UV embossing process applied for light bar‐based sub‐wavelength gratings for backlight

This study proposes a roll‐to‐roll process‐based sub‐wavelength grating, which is attached on a light bar to turn the side‐lit red/green/blue (620, 520, and 450 nm) incident rays into a uniformly and normally output white light with high illuminance from the light bar's surface. On the basis of the rigorous coupling wave analysis, the relationship between the first‐order transmission/reflection efficiency and the pitch of the gratings with different shapes was analyzed. The optimal design can effectively reduce the coupling length and enhance the white color balance for display applications.